English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Support
Details
Color day/night camera SN-BXC59/40CDN has been equipped with the latest digital signal processor (DSP) Sony Effio-S and superior image sensor Sony ExView HAD CCD II with effective resolution of 976(H)x582(V) pixels.
General view of the camera
Side view
Bottom view
Rear view
The included accessories
View of the packaging
Distinguishing features:
- Image sensor: 1/3" Sony ExView HAD CCD II,
- DSP: Sony Effio-S,
- Horizontal resolution (TVL): 650 (color), 700 (B/W),
- High sensitivity: 0.1 lx (color), 0.03 lx (B/W), 0.00009 lx (slow shutter),
- ICR - mechanically switching IR filter,
- S/N ratio: >54 dB,
- OSD menu,
- Wide Dynamic Range D-WDR (ATR-EX),
- DIS - Digital Image Stabilization - significantly reduces image jitter caused by micro-vibrations of the camera from passing vehicles or wind,
- Sense-Up - digital slow shutter speed multiplying sensitivity in extremely low-light environments,
- 3D noise reduction,
- E-Zoom - digital zoom,
- 20 privacy zones, also of irregular shapes,
- 20 motion detection areas, also of irregular shapes.
The combination of Sony CCD ExView HAD CCD II and Sony Effio-S processor resulted in a camera with very good performance:
- horizontal resolution of 700 TVL (B/W)
Crisp and detailed image
- accurate color reproduction regardless of the type of light source
Excellent color reproduction over a wide range of color temperature of a light source (1,800 K to 10,500 K)
- 2D and 3D noise reduction
2D and 3D noise reduction improves the clarity of images through lowering their graininess.
Generally, noise reduction lowers the amount of data to record.
Generally, noise reduction lowers the amount of data to record.
- enhanced digital wide dynamic range (DWDR): ATR-EX function
The influence of ATR-EX function on readability of the image in the brightest and darkest areas
- adjustment to work with IR illuminators
The IR imaging is free from overexposure
The Sunell SN-BXC59/40CDN M11220 camera is equipped with superior 1/3" Sony ExView HAD CCD II image sensor that is extremely sensitive (0.00009 lx in sense-up mode) and capable of providing high-resolution video (color: 650 TVL, B/W: 700 TVL). Its new-generation DSP (Effio-S) has functions that significantly improve image quality, such as Sense-Up (slow shutter speed), 3D noise reduction, increased numbers of privacy zones and motion detection areas (also of irregular shapes, if needed).
Effio-S is an extension of Effio-E processor from the Effio family. Not only has it been enriched with new important functions, but also shows improved performance of basic functions. The camera has 3D noise reduction feature, which lowers noise caused by poor lighting and improves S/N ratio. This feature significantly reduces the amount of disk space on the DVR needed for recording the surveillance video. The reduction can reach up to 70%.
Specifications:
| Name | SN-BXC59/40CDN |
| Code | M11220 |
| Image sensor | 1/3", CCD, Sony ExView HAD CCD II DSP Sony Effio-S |
| Video standard | PAL |
| Effective pixels | PAL:976(H) x 582(V) |
| Horizontal resolution (TVL) | 650 (color) 700 (B/W) |
| Sensitivity (F1.2) [lx | 0.1 (color) 0.03 (B/W) 0.00009 (slow shutter) |
| S/N ratio | >54 dB |
| Electronic shutter | 1/50...1/100000 |
| AGC | Yes |
| OSD menu | Yes |
| D-WDR | ATR-EX |
| BLC | Yes |
| Day/night function | Yes, ICR |
| DNR | 2D, 3D |
| Privacy masks | 20 zones (irregular shapes possible) |
| Mirror image | Yes |
| Motion detection | 20 zones (irregular shapes possible) |
| IR illuminator | No |
| Lens | - |
| Viewing angle | - |
| Type | Box |
| External dimensions | 133x71x64 |
| Vandal-proof | No |
| Housing material | aluminum alloy |
| Operating temperature | -10°C...+50°C |
| IP rating | - |
| Connectors | video (BNC) power (terminal block) |
| Power | 12 VDC / 0.13 A, 24 VAC |
| Power consumption | 1.6 W |
| Weight | 0.55 kg |
| Remarks |
|
The table below shows the differences between digital signal processors of Effio series:
| Model | "Effio-P" | "Effio-S" | "Effio-E" |
| IC marking | CXD4129GG | CXD4130GG | CXD4127GG |
| Supported image sensors | 960H, 760H WDR/Normal CCDs | 960H, 760H Normal CCDs | 960H, 760H, 510H Normal CCDs |
| Image resolution | > 650 TVL | > 650 TVL | > 650 TVL |
| WDR | Yes | No | No |
| ATR | ATR-EX | ATR-EX | ATR |
| Noise reduction | 2D&3D-NR | 2D&3D-NR | 2D-NR |
| Privacy masks | 20 | 20 | 8 |
| E-zoom | Yes | Yes | No |
| Sens-up | Yes | Yes | No |
| Digital image stabilization | Yes | Yes | No |
| HLC | Yes | Yes | Yes |
| Video motion detection | Yes | Yes | Yes |
| OSD | Yes | Yes | Yes |
8-pin I/O socket in the rear part of the camera is used to control some functions of the camera and to trigger external devices.
I/O socket pinout
Pinout description (wire colors of additional cable, H& L - logical levels):
Pins 1 (black), 2 (brown), 3 (orange): not used;
Pin 4 (blue): information on mode of work (H - color, L - B/W) - the levels can be used for control of an additional IR illuminator (the camera switches to B/W mode in low light);
Pin 5 (green): alarm output - motion detection (H - no motion, L - motion) - can cooperate with alarm input in a DVR or with an independent alarm system;
Pin 6 (yellow): ground
Pin 7 (white): external control of mode of work (H - B/W, L - color) - possibility to adjust mode of work to specific requirements;
Pin 8 (red): 3.3 VDC output.
Pins 1 (black), 2 (brown), 3 (orange): not used;
Pin 4 (blue): information on mode of work (H - color, L - B/W) - the levels can be used for control of an additional IR illuminator (the camera switches to B/W mode in low light);
Pin 5 (green): alarm output - motion detection (H - no motion, L - motion) - can cooperate with alarm input in a DVR or with an independent alarm system;
Pin 6 (yellow): ground
Pin 7 (white): external control of mode of work (H - B/W, L - color) - possibility to adjust mode of work to specific requirements;
Pin 8 (red): 3.3 VDC output.
