Support
Details
Redbeam IC35 is the highest class CCTV camera designed for operation in all-weather and all-light conditions. It is equipped with Redbeam IR LED illuminator, characterized by high output power and very good efficiency (due to comparatively low power consumption). This is achieved through the use of diode matrix instead of individual LEDs. It allows for range up to 40 m at half power angle of 30o.
Distinguishing features:
- SONY CCD 470 TVL
- Built-in 6 mm lens
- IR illuminator with 40 m range and 30o half-power angle
- Outdoor housing
- Mount in the rear part of the housing
Redbeam IC40 camera is equipped with high-quality SONY CCD (470 TVL) providing high image quality under all lighting conditions. The outdoor housing allows to install the camera in any environment, which makes the camera a very flexible device.
The pre-installed IR illuminator uses IR matrices that provide IR beam at 850 nm, with range up to 40 m and half-power beam width of 30o (total width of 60o).
The set has been carefully prepared by the manufacturer, which guarantees many years of trouble-free operation. It is enough to mount the camera in a desired location, to ensure power supply (12 VDC), and to pick up the video signal (using coaxial cable, e.g. CAMSET 50 M6050). The focal length of the lens and the beam width of the illuminator are chosen so that 2/3 of the entire area shown by the camera is within the half-power angle of the illuminator (and the whole area within the total angle).
If the whole area is to be evenly lit, we recommend to use the Redbeam IC40 model with double IR illuminator - M1130.
If the whole area is to be evenly lit, we recommend to use the Redbeam IC40 model with double IR illuminator - M1130.
The illuminator used with the camera is also available separately as M1640.
The benefits of Redbeam IR illuminators are more thoroughly discussed in article
Specifications
Name | IC35 |
Code | M1131 |
Image sensor | 1/3" Sony HAD CCD 470 TVL |
Lens | 6 mm |
System | PAL/NTSC |
Synchronization | internal/external |
Shutter | 1/50 - 1/100000 s (PAL) |
BLC | ON/OFF |
White balance | ATW/AWC |
S/N ratio | >50 dB |
Minimum light (without IR) | 0.02 lx |
Video output | 1.0 V(p-p), 75 ohm, BNC |
IR output power [mW] | 2000 |
Wavelength [nm] | 850 |
Half-power beam width [°] | 30 |
Range [m] | max 40 (*) |
Supplying voltage | 12 VDC |
Current consumption | 150 mA (IR OFF) 650 mA (IR ON) |
Operating temperature [°C] | -20...+50 |
(*) - the IR reflector range depends on the type of illuminated objects/surfaces (reflectance in the infrared range).
Specifications
Nazwa | IC35 |
Kod | M1131 |
Przetwornik | 1/3" Sony HAD CCD 470 TVL |
Obiektyw | 6 mm |
System | PAL/NTSC |
Synchronizacja | wewn./ zewn. |
Migawka | 1/50 - 1/100000 s (PAL) |
BLC | wł./wył. |
Balans bieli | ATW/AWC |
Współczynnik S/N | >50 dB |
Minimalne oświetlenie bez IR | 0,02 lx |
Wyjście wideo | 1,0 V(p-p), 75 Om, BNC |
Moc wyjściowa [mW] | 2000 |
Długość fali [nm] | 850 |
Kąt połowy mocy [°] | 30 |
Zasięg [m] | max 40 (*) |
Zasilanie | DC 12 V |
Pobór prądu | 150 mA (IR wył.) 650 mA (IR wł.) |
Temperatura pracy [°C] | -20...+50 |