Day/Night Camera Redbeam IC40 (470 TVL, Sony HAD CCD, 0.02 lx, 2x IR 40m)

Code: M1130
This product is no longer available
Estore: Library:

Support

Details

Redbeam - reliable light in all conditions<br />New generation of CCTV illuminators
Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the camera

Ceiling Dome Camera CAM 082 (420TVL, Sharp, 0.5 lx, 3.6mm)
View of the mounting accessories
Redbeam IC40 is the highest class CCTV camera designed for operation in all-weather and all-light conditions. It is equipped with double Redbeam IR LED illuminator, characterized by high output power and very good efficiency (due to comparatively low power consumption). This is achieved through the use of a diode array instead of individual LEDs. It allows for range up to 40 m at half power angle of 45o.
Distinguishing features:
  • SONY CCD 470 TVL
  • Built-in 6 mm lens
  • Two IR illuminators with 40 m range and 90o operation angle
  • Outdoor housing
  • Mount in the rear part of the housing
Redbeam IC40 camera is equipped with high-quality SONY CCD (470 TVL) providing high image quality under all lighting conditions. The outdoor housing allows to install the camera in any environment, which makes the camera a very flexible device.
The pre-installed double IR illuminator uses IR arrays that provide IR beam at 850 nm, with range up to 40 m and half-power beam width of 45o (total width of 90o).
The set has been carefully prepared by the manufacturer, which guarantees many years of trouble-free operation. It is enough to mount the camera in a desired location, to ensure power supply (12 VDC), and to pick up the video signal (using coaxial cable, e.g. CAMSET 50 M6050). The focal length of the lens and the beam width of the illuminator are chosen so that the entire area shown by the camera is evenly lit.

The IR illuminators used in the set are smaller than the M1640 model (they are also used in the case of IC35 cameras M1131).
The benefits of Redbeam IR illuminators are more thoroughly discussed in article
Specifications
Name IC40
Code M1130
Image sensor
1/3" Sony HAD CCD
470 TVL
Lens 6 mm
System PAL/NTSC
Synchronization
internal/external
Shutter 1/50 - 1/100000 s (PAL)
BLC ON/OFF
White balance
ATW/AWC
S/N ratio
>50 dB
Minimum light (without IR) 0.02 lx
Video output
1.0 V(p-p), 75 ohm, BNC
IR output power [mW] 3600
Wavelength [nm] 850
Half-power beam width [°] 45
IR range [m] max 40 (*)
Supplying voltage
12 VDC
Current consumption
150 mA (IR OFF)
900 mA (IR ON)
Operating temperature [°C] -20...+50
(*) - the IR reflector range depends on the type of illuminated objects/surfaces (reflectance in the infrared range).
Redbeam - IR illuminators

Specifications

Nazwa IC40
Kod M1130
Przetwornik 1/3" Sony HAD CCD
470 TVL
Obiektyw 6 mm
System PAL/NTSC
Synchronizacja wewn./ zewn.
Migawka 1/50 - 1/100000 s (PAL)
BLC wł./wył.
Balans bieli ATW/AWC
Współczynnik S/N >50 dB
Minimalne oświetlenie bez IR 0,02 lx
Wyjście wideo 1,0 V(p-p), 75 Om, BNC
Moc wyjściowa [mW] 3600
Długość fali [nm] 850
Kąt połowy mocy [°] 45
Zasięg reflektora IR [m]  max 40
Zasilanie DC 12 V
Pobór prądu 150 mA (IR wył.)
900 mA (IR wł.)
Temperatura pracy [°C] -20...+50