This section includes devices and equipment intended for making installations in which the signal source is the terrestrial TV and DVB-T and satellite TV. The offered products include, among others: TV and radio antennas, satellite dishes, coaxial cables, amplifiers and multiswitches, which can be used for both, individual and SMATV systems in residential buildings, hotels, commercial buildings, etc.
Antenna installers will find professional DVB-T2 and DVB-S2 signal meters here. The distribution of DVB-T2 terrestrial and satellite television signals in hotels and commercial buildings requires dedicated headend panels and digital modulators. The offer also includes IPTV station panels.
The offer is complemented by devices for transmission of HDMI signals, connectors, splitters, antenna splitters, TV/SAT and multimedia connectors.
This multiplexer is used for splitting signal among multiple TV receivers. It is advised to use the device if a passive splitter lowers the signal to an unacceptable level. The device has four outputs. A power supply is not included. The splitter is to be powered through the No. 4 output ...
Code: B1220

5-862 MHz band, 17 dB rejection loss. 4dB through loss, 75 Ohm in/out impedance. Allows to connect multiple receivers to a single antenna. Can also be used as an antenna adder. Built on an un-coupling transformer. Input, output - F-type plugs. Can be installed on a mast. Direct current flow possibil...
Code: C0920

Transmitted frequency band: 5-862 MHz. One of the outputs enables to pass DC to the input in order to power "up-linked" devices.
Code: E2094

Frequency band: 5-862 MHz. The output of 3,9 dB attenuation enables to pass DC to the input in order to power "up-linked" devices.
Code: E2097