This category offers, among others, metal accessories for installation of antennas and cabling. Masts designed for installation of TV antennas and telecommunication antennas can be divided into steel masts and aluminum masts. The maximum length of a mast is 3 meters. There is also a range of lattice masts available for taller structures. Mast mounts can be used to install the mast to a wall or chimney. Depending on the version, antenna brackets can be mounted on balustrades or walls.
The range of housings and junction boxes includes, among others: metal, flush-mounted, surface mounted indoor housings designed for the installation of devices and accessories for various types, as well as metal sealed housings with increased tightness class. The range of the is complemented by TV mounts dedicated for mounting TV sets on walls.
The single MK section for building a mast/tower is 1.5m-high lattice construction made of aluminum. The design with triangular cross-section (in a vertical projection) with three sides of 250 mm is exceptionally strong, but light and easy to handle, even with one hand. The support elements are alumi...
Code: E9160
€230.35
Temporarily unavailable

The E9161 base is the foot for free-standing aluminum masts/towers composed of MK E9160 sections. The construction of the base allows for tilt up to horizontal position.
Code: E9161
€154.78
Temporarily unavailable

Anchor bolts for concrete foundation with bolt diameter 12 mm, for erecting masts/towers composed of tower sections E9160.
Code: E9162
€22.21
Temporarily unavailable

The MB-3/PLUS E8744 ballast mast base can hold terrestrial TV and communications/Wi-Fi antennas.
Code: E8744
€195.67
Available

The package includes two steel tapes, each 5 m long. They are wrapped around a chimney to hold an antenna mast firmly in place. If the tape is too short, additional 10 m reels can be ordered - E8520. The weight of the clamp: 2.75 kg.
• For mounting masts to chimneys
• Easy installation
• Two steel tapes (5 m long) included
• Optional 10 m reels available
• Weight: 2.75 kg
Code: E8514
€21.22
Available

The package includes two steel tapes, each 5 m long. They are wrapped around a chimney to hold the antenna mast firmly in place. If the tape was to too short, additional 10 m reels can be ordered - E8520. Weight of the clamp: 3.76 kg.
• Antenna chimney mount,
• Mast-chimney distance: 170 mm,
• For masts with diameters 38-50 mm,
• Fixing with two steel tapes (2x 5 m),
• Weight: 3.76 kg.
Code: E8516
€21.22
Available

• Wall mast mount
• Width: 200 mm
• Mounting with 4 screw anchors
• For masts with diameter 38-50 mm
• Weight: 0.87 kg
Code: E8532
€5.82
Available

The OMM-50L13 bracket is designed for mounting antenna masts to walls.
• Mast bracket with wall mounting
• Width 288 mm
• Mounting by four expansion bolts
• For masts with diameter of 38/50 mm
• Mast distance from wall 130 mm
Code: E8533
€8.67
Available

• Wall mount for antenna masts
• Width: 315 mm
• Each of two pieces mounted with 4 screw anchors
• For masts with diameter 38-50 mm
• Weight: 1.4 kg
Code: E8534
€8.18
Available

The E8535 wall mount is designed to mount an antenna mast to a wall. The kit includes two brackets with support.
• Wall mast mount
• Adjustable distance between mast and wall: 430...700 mm
• Max span (width): 1010 mm
• For masts with diameter 38-50 mm
• Made of galvanized steel
• Mounting with 10 screw anchors
• Weight: 7.85 kg
Code: E8535
€44.52
Available