English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
This multiplexer is used for splitting signal among multiple TV receivers. It is advised to use the device if a passive splitter lowers the signal to an unacceptable level. The device has four outputs. A power supply is not included. The splitter is to be powered through the No. 4 output ...
5-862 MHz band, 17 dB rejection loss. 4dB through loss, 75 Ohm in/out impedance. Allows to connect multiple receivers to a single antenna. Can also be used as an antenna adder. Built on an un-coupling transformer. Input, output - F-type plugs. Can be installed on a mast. Direct current flow possibil...
The RV-1/2P-UHD multiplexer is designed to split signals from two sources without any loss of quality of the signal.
• Signal splitting from 1 to 2 outputs
• Input splitting configuration with jumpers
• Input splitting configuration with jumpers
D-SEP/HD is a 1-channel galvanic separator for signals transmitted via 75 ohm coaxial cable.
• Isolation between different points of the system, such as cameras and DVR
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
• Potential difference protection
• Signals in CVBS, AHD, HD-CVI and HD-TVI up to 8 MP.
LZ-1 is a passive device distributing power from a single power supply source.
LZ-8/POL is a simple DC power supply distributor that provides power from one higher power unit to a number of devices. The distributor splits the input into 8 outputs; each of them is protected by polymer fuse...
The M18171 AC/DC adapter dedicated for 12 VDC CCTV cameras operates in switching mode and can be placed outdoors on a wall (due to IP53 rating, the splash-proof housing should be protected by a roof/canopy). The connectors of the camera can be placed inside the housing of the power supply.
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
ZR12-100/LZ-8P is a power supply unit designed for mounting in 19" RACK cabinets. The unit provides 12 VDC output voltage available at 8 screw outputs, each with 1 A current capacity. Each output is protected with a polymer fuse and monitored with a green LED (during operation, a dark LED means blow...
