EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Switched-mode power supply designed to power 5 VDC electronic devices equipped with 2.1/5.5 socket ("+" in the midpoint), with current consumption not exceeding 2 A.
• AC input voltage 100-240 V
• Stabilised output voltage 5 V
• Output power 11.5 W
• Current capacity 2.3 A
• Plug 2.1/5.5 on cable
• Stabilised output voltage 5 V
• Output power 11.5 W
• Current capacity 2.3 A
• Plug 2.1/5.5 on cable
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with total current consumption not exceeding 2 A.
• AC/DC adapter dedicated for CCTV cameras
• Output voltage: 12 VDC
• Max. output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• Output voltage: 12 VDC
• Max. output current: 2 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
Switched-mode power supply designed to power 12 VDC electrical devices equipped with 2.1/5.5 socket, with current total consumption not exceeding 5 A. It is suitable for the majority of CCTV cameras.
• AC/DC adapter dedicated for CCTV systems
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
• 12 VDC output
• Current capacity: 5 A
• Over-current protection
• Over-voltage protection
• Short-circuit protection
The VHD-15 repeater is designed to amplify video signals transmitted via twisted-pair or coaxial cable.
• Standard: AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
The POE-802.3AF/C stabiliser allows cameras that do not support PoE to be powered by a device compliant with the 802.3af or 802.3at standards.
• Stabilizer changes 48 V POE voltage to 12 V for IP cameras powered by 12 V
Audio module designed for cameras. It has adjustable gain.
• Power supply: 12 V
• Current consumption: 5 mA
• Gain adjustment: 1x-500x
• Cable length with microphone: 100 mm
• Current consumption: 5 mA
• Gain adjustment: 1x-500x
• Cable length with microphone: 100 mm
The MP-6/D microphone is designed for listening to ambient sounds.
• Power supply: 12 V
• Current consumption: 5 mA
• Frequency response up to 20 kHz
• Metal housing
• Current consumption: 5 mA
• Frequency response up to 20 kHz
• Metal housing
The OR-150/T bracket is used to mount cameras on a mast or lamppost with a diameter of 70 to 280 mm. It is made of powder-coated steel.
• For mounting cameras on a mast or lamppost with a diameter of 70 to 280 mm
• Made of powder-coated steel
• Permits the installation of one camera with rectangular mounting screw spacing
• Made of powder-coated steel
• Permits the installation of one camera with rectangular mounting screw spacing
The fixture has been specially designed for ULTIMODE FAST MS-1 mechanical weldments and allows up to 6 splices to be secured.
• ULTIMODE 6-splicer mechanical splice bracket
• Hole for screw or bolt
• Hole for screw or bolt
The Delta DRC-24V60W-1AZ 60 W switched-mode power supply is designed to supply power to electronic equipment that requires 24 VDC supply.
• Power output: 60 W
• Output voltage: DC 24 V
• Output voltage adjustment range: DC 24 - 28 V
• Output current: 2,5 A
• Protection: overload, overvoltage, short circuit
• Output voltage: DC 24 V
• Output voltage adjustment range: DC 24 - 28 V
• Output current: 2,5 A
• Protection: overload, overvoltage, short circuit
