The package includes two steel tapes, each 5 m long. They are wrapped around a chimney to hold the antenna mast firmly in place. If the tape was to too short, additional 10 m reels can be ordered - E8520. Weight of the clamp: 3.76 kg.
• Antenna chimney mount,
• Mast-chimney distance: 170 mm,
• For masts with diameters 38-50 mm,
• Fixing with two steel tapes (2x 5 m),
• Weight: 3.76 kg.
Code: E8516
€21.22
Available

The tape has its application in antenna installations. It is used together with chimney clamp OK-43 E8514 and OK-50 E8516 when the tape included is too short. Weight - 1.01 kg.
Code: E8520
€5.07
Available

• Wall mast mount
• Width: 200 mm
• Mounting with 4 screw anchors
• For masts with diameter 38-50 mm
• Weight: 0.87 kg
Code: E8532
€5.82
Available

The OMM-50L13 bracket is designed for mounting antenna masts to walls.
• Mast bracket with wall mounting
• Width 288 mm
• Mounting by four expansion bolts
• For masts with diameter of 38/50 mm
• Mast distance from wall 130 mm
Code: E8533
€8.67
Available

• Wall mount for antenna masts
• Width: 315 mm
• Each of two pieces mounted with 4 screw anchors
• For masts with diameter 38-50 mm
• Weight: 1.4 kg
Code: E8534
€8.18
Available

The E8535 wall mount is designed to mount an antenna mast to a wall. The kit includes two brackets with support.
• Wall mast mount
• Adjustable distance between mast and wall: 430...700 mm
• Max span (width): 1010 mm
• For masts with diameter 38-50 mm
• Made of galvanized steel
• Mounting with 10 screw anchors
• Weight: 7.85 kg
Code: E8535
€44.52
Available

The bracket is made of flat bar 4 mm thick and welded steel pipe, covered with white powder lacquer. Plastic cap prevents water from getting inside. Suitable for mounting antenna mast to a wall. Total weight: 2 kg.
• Wall mast mount
• For masts with diameter 38-50 mm
• Support guarantying stability
• Width: 360 mm
• Distance between mast and wall: ca. 210 mm
• Weight: 2 kg
Code: E8536
€12.16
Available

• Wall mast mount
• Support guarantying stability
• Width: 550 mm
• For masts with diameter 38-50 mm
• Distance between mast and wall: ca. 365 mm
Code: E8552
€24.85
Available

The OR-30-50R90-150 E8558 bracket is used for the parallel installation of two tubular masts. The distance between the masts can be adjusted by setting the length of the arm in the range of 300-500 mm.
Code: E8558
€47.36
Available