EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Example of practical application allowing to:
- receive terrestrial TV channels,
- receive FM radio programs,
- receive satellite broadcasts from two satellites,
- receive FTA channels,
- receive selected pay TV channels
- watch the image from any IP CCTV camera on any TV set.
Two Quatro LNBs A98257 are connected with the R70808 multiswitch (via eight coaxial cables TRISET-113 E1015). In the diagram below, the inputs of the multiswitch connected with the second LNB (for a second satellite) are not visible (they are physically placed in the second row, behind the first). The use of twin-tuner PVR receivers requires installing two TRISET-113 E1015 cables from the multiswitch to the R694140 outlets. This will enable simultaneous viewing of one program and recording of another. The diagram shows two "single" receivers and one twin-tuner receiver.
The injection of the video information from IP CCTV cameras into an RF distribution network (a private or shared antenna system, (S)MATV/CATV network etc.) requires application of intermediate devices. In the case of using an NVR with HDMI output, these usually are HDMI - DVB-T modulators.
The cables used:
The terrestrial antennas should be chosen according to local reception conditions.
Selection of Terrestrial TV Antennas
Selection of Terrestrial TV Antennas
An application example of the RTV/SAT + CCTV installation in a single-family house using a multiswitch and a DVB-T/T2 modulator.
