Aluminum Mast/Tower Section MK (1.5m, lattice construction)
Code: E9160
View of the section
The bottom view
A look at the lattice construction
View of the accessories
An example of tower construction
Coupling of two E9160 sections
The E9161 base allows for taking the tower down
Erection drawing: 1- ground level, 2 - concrete foundation
The single MK section for building a mast/tower is 1.5m-high lattice construction made of aluminum. The design with triangular cross-section (in a vertical projection - see the bottom view picture) with three sides of 250 mm is exceptionally strong, but light and easy to handle, even with one hand. The support elements are aluminum tubes with an outside diameter of 35 mm and 1.5 mm thick walls. The MK sections can be joined together to form free-standing masts/towers up to 6-meter high (without guys), capable of supporting the weight of the installer climbing up.
Recommended mounting components:
Key features
- No need for guys
- Assembled tower can be climbed by installer weighting up to 100 kg (wind speed below 5 m/s)
- Possibility of transport in the trunk or on the roof rack of a car
- Dimensions of the packaging allow for sending the item via courier service across Europe
View of the form work for the foundation of the MK tower
The fresh concrete foundation of the tower with embedded anchor bolts and the base mounted on
A ready foundation with the MK tower in place
Construction variations with E9160 sections, with 3 m, 4.5 m and 6 m total heights.
Specifications
| Name | Tower Section MK 1.5 m |
| Code | E9160 |
| Material | Aluminum |
| Height of triangular lattice construction [m] | 1.5 |
| Lengths of sides in vertical projection [mm x mm x mm] | 250 x 250 x 250 |
| Support elements [mm] | Ø 35 aluminum tubes |
| Tube wall thickness [mm] | 1.5 |
| Joining capability | Yes, on both ends |
| Weight [kg] | 5.05 |
Aluminum Mast/Tower Section MK (1.5m, lattice construction)
Code: E9160