HDMI to IP Converter/Extender (1x5e, PoE 802.3af): Signal-HD (multicast)
Code: H3624
View of the receiver and transmitter (sender) units
Opposite side view
View of the included accessories
The Signal-HD HDMI to IP converter/extender enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units. The transmitter and receiver units should be powered remotely via a PoE switch, e.g. N29980. Aside from transmission of HDMI signal, the set allows the user to control the source of the signal from the location of the television/monitor (function of IR extender).
Key features
- Transmission via a single Cat. 5e/6 cable
- Transmitter and receiver powered from a PoE switch (802.3af)
- UDP/IP protocol (multicast)
- Transmission of IR control signals
- Point-to-Multipoint topology option
- Support for 1080p mode
- Maximum length of cable: 100 meters
IP signal coming from the transmitter may be applied to an Ethernet switch to split it among multiple receivers. The bit rate of the compressed signal at the output of the transmitter is about 15 Mbps (multicast transmission). The output signals can be properly decoded only by the dedicated receivers - it cannot be done by a PC equipped with a network card. The set is not compatible with H3604 and H3605 devices.
The set is perfect for connecting remote HD source like sat receiver, Blu-ray player, PC, game console etc. to HD-enabled TV/monitor/projector. It requires to use only one, comparatively thin cable, which makes it easy to hide it, e.g. when installing the TV/monitor on an LCD/LED mount.
An application of HDMI > IP converter/extender units (point-to-multipoint)
The converter/extender uses High-Definition Digital Bit Transmission Technology (HDbitT). HDbitT is a protocol used for professional delivery/transmission of high-quality image and audio over IP networks. The protocol supports video resolutions of up to 4Kx2K @ 60Hz, transmitted wirelessly or over network cables, electrical installations, optical fibers, or coaxial cables.
Specifications
| Name | HDMI to IP converter SignalHD PoE 802.3af |
| Code | H3624 |
| Supported video formats | DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080p |
| Max length of cat.5e cable | 100 m |
| Protocol | HDbitT |
| Operating temperature range | -10ºC...60ºC |
| Operating humidity range | 20%-90% (no condensation) |
| Dimensions | 140x58x26 mm |
| Power | PoE 802.3af |
HDMI to IP Converter/Extender (1x5e, PoE 802.3af): Signal-HD (multicast)
Code: H3624