TV/SAT Tap: Terra SD-910 (9-in, 18-out, 10dB, class A)
Code: R70524
TV/SAT Splitter: Terra SDQ-508 (5-in, 20-out, class A)
View of the tap
TV/SAT Splitter: Terra SDQ-508 (5-in, 20-out, class A)
Top view
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary with lower attenuation and the secondary with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of signal levels in their subnetworks. The tap is equipped with DC-pass switch that in "ON" position runs current through "H" lines to two branches. In "OFF" position it takes place only within one branch.

The die-cast housing provides high screening efficiency by preventing the penetration of interfering signals to the unit.
Key features
  • 9-cable system (8x SAT + terrestrial TV/Radio)
  • Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
  • Replaces 9 individual TV/SAT taps
  • Equipped with switched-on/off DC pass
  • Die-cast housing guarantying high screening efficiency (class A)
Specifications
 R70524R70525R70526
NameSD-910SD-915SD-920
CodeR70524R70525R70526
Operating bands [MHz]SAT950 - 2400
DVB-T/Radio5 - 862
Pass-trough loss [dB]SAT1.71.20.9
DVB-T/Radio1.61.21.0
Tap attenuation [dB]SAT8...1213...1718...22
DVB-T/Radio101520
Separation between inputs [dB]SAT/SAT30
DVB-T/SAT30
DC pass [A]2
Screening efficiency class
A
Operating temperature range [°C]-20...+50
Dimensions [mm]120x120x51
Weight [kg]0.9
 
TV/SAT Tap: Terra SD-910 (9-in, 18-out, 10dB, class A)
Code: R70524