IPTV Streamer: TERRA sdi 480 (DVB-S/S2 to IP, USB port)
Code: R81610
 |  |  |
Views of the sdi 480 R81610 IPTV DVB-S/S2 to IP streamer
View of the included accessories - wall mount, distance lath, RF bridge, termination load resistor
Key features
- Conversion of unencrypted DVB-S/S2 signals to IP stream,
- Support for EN50494 standard - possibility of feeding the streamer with DVB-S/S2 signals from SRM521 R80521 multiswitch only via single coaxial cable,
- Conversion of channels from 8 transponders, max 100 channels (1 module),
- USB port allowing for streaming of material in .ts format
- Possibility of creating thematic lists (e.g. channels in the same language) that are automatically detected by receivers,
- Possibility of watching TV on PCs, laptops etc. running free app,
- IPTV receivers have recording option and access to some web services (YouTube etc),
- Use of twisted-pair cables as the transmission medium,
- Easy way to extend the transmission range (through the use of media converter and optical fiber),
- Low power consumption, power redundancy,
- IP multicast technique saving LAN resources,
- Unique communication protocol allowing fully automatic configuration of IPTV receivers.
The TERRA sdi 480 R81610 DVB-S/S2 to IP streamer allows for the selection of up to 100 unencrypted satellite channels from up to 8 transponders and their distribution via Ethernet (LAN) network based on twisted-pair cabling. The output IP stream with effective throughput up to 400 Mbps is usually provided to IPTV receivers via network switches. The use of multicast technique considerably saves the network resources.
Additionally, the sdi 480 R81610 module can stream any material provided via USB port in the form of MPEG-2 TS (Transport Stream).
Thanks to television distribution technology based on IP, the cabling in a building can be limited only to one (data + IPTV) or two (separate for data and for IPTV) UTP/FTP cable(s). In addition to low cost of such cabling, the users get access to additional interactive features, and the programming can be adapted to their specific requirements.
One of the main advantages of the Terra IPTV solution is no need for any middleware software between the headend and the receivers. As a result, the system is much cheaper (no software license fees) than other solutions and very simple in both configuration and operation. A unique feature of the system is the fact that the terminal units - R81612 IPTV receivers - do not require any configuration, which can be of great importance in the case of larger networks. They automatically detect any changes in the local network or the programming.
Satellite signals in all professional SMATV systems should be fed from QUATRO LNBs.
View of the information window of the sdi-480 R81610 module, including the most important parameters such as input level in dBμV, SNR, VBER.
The "Output streams" window is used to configure the output streams individually after scanning the input stream. The capacity is up to 512 TV/radio channels with individual multicast addresses, 8 MPTS streams.
Specifications:
| Name | sdi480 | |
| Code | R81610 | |
| RF inputs | Frequency range [MHz] | 950-2150 |
| AGC/Impedance [dBμV/Ω] | 43-83/75 | |
| Standard | DVB-S/S2 | |
| Modulation | 4x QPSK/8PSK | |
| Symbol rate [Ms/s] | 2 ÷ 45 | |
| LNB powering/Control | 0/14/18 V & 300 mA max. DiSEqC 1.0 | |
| IP output | Standard | IEE802.3 100/1000 Base T |
| Bit rate | up to 400 Mbps | |
| Transmission protocols | UDP/RTP | |
| Multicast | Yes | |
| MPTS | Yes | |
| SPTS | Yes | |
| General | Control port | IEE802.3 10/100 Base T |
| Power [V/A] | 12/0.7 | |
| Operating temperature range [ºC] | 0...+50 | |
| Dimensions [mm] | 48 x198 x 107 | |
| Weight [kg] | 0.97 | |
IPTV Streamer: TERRA sdi 480 (DVB-S/S2 to IP, USB port)
Code: R81610