€236.05
Price | Disc. | Quantity | Validity |
---|---|---|---|
€236.05 | 0 % | from 1 piece |
Available
The DS-2CD2343G2-LI is a Hikvision IP dome camera equipped with a hybrid illuminator and AcuSense technology.
• 1/2.9" Progressive Scan CMOS sensor
• 4 MP resolution - 2688 × 1520 @ 25 fps
• Fixed focal length lens 4 mm (F1.6)/84°
• Hybrid IR and white light illuminator up to 30 m
• H.265+/H.265/H.264+/H.264 compression /MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent VCA analysis based on object classification (motion detection 2.0, line crossing, intrusion detection)
• Target trimming
• Supported microSD cards up to 512 GB
• Three stream support
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI
• ANR function
• Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Protection rating: IP67
• 12 VDC or PoE (802.3af) power supply
• 4 MP resolution - 2688 × 1520 @ 25 fps
• Fixed focal length lens 4 mm (F1.6)/84°
• Hybrid IR and white light illuminator up to 30 m
• H.265+/H.265/H.264+/H.264 compression /MJPEG
• AcuSense technology (false alarm filter, object classification: human, vehicle)
• Intelligent VCA analysis based on object classification (motion detection 2.0, line crossing, intrusion detection)
• Target trimming
• Supported microSD cards up to 512 GB
• Three stream support
• Image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
• Regions of interest ROI
• ANR function
• Application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS)
• Access via P2P cloud
• Protection rating: IP67
• 12 VDC or PoE (802.3af) power supply
Details
The DS-2CD2343G2-LI is a Hikvision IP dome camera equipped with a hybrid illuminator and AcuSense technology. The AcuSense technology increases the effectiveness of the surveillance system by eliminating false and nuisance alarms through human/vehicle object filtering. The use of IR and LED illuminators in a single camera allows it to operate in several modes – classic IR, white LED light and smart mode, in which when an object such as a person or vehicle is detected, LED illumination is switched on, allowing observation in color mode. After the object disappears, the camera switches back to IR mode.
The camera is fitted with a 4 MP 1/2.9" CMOS sensor and a hybrid illuminator with a range up to 30 m to ensure proper visibility in low-light conditions. It has a fixed 4 mm lens with a viewing angle of 84°. Support for the legacy and latest H.265(+) compression methods allows for the archiving time of recordings to be extended while maintaining excellent image quality and backward compatibility. Additional image enhancement features, such as AGC, 3D-DNR, WDR (120 dB), BLC, HLC, and built-in image analytics (VCA) allow the camera to be used for advanced projects. The IP67 rated housing protects the inside electronic components from adverse weather conditions. The camera can be powered conventionally with 12 VDC or through PoE (compliant with the 802.802.3af standard).
NOTE! Current software version is available
Key features:
- 1/2.9" Progressive Scan CMOS sensor
- 4 MP resolution – 2688 × 1520 @ 25 fps
- fixed focal length lens 4 mm (F1.6)/84°
- hybrid illuminator IR and white light up to 30 m
- compression H.265+/H.265/H.264+/H.264/MJPEG
- technology AcuSense (false alarm filter, object classification: human, vehicle)
- intelligent VCA analysis operating based on object classification (motion detection 2.0, line crossing, intrusion detection)
- target clipping
- supported microSD cards up to 512GB
- supports three streams
- image functions: AGC, 3D-DNR, WDR (120 dB), BLC, HLC
- regions of interest ROI
- ANR function
- application for a PC iVMS-4200 and smartphone Hik-Connect (Andriod, iOS)
- access via P2P cloud
- protection rating: IP67
- 12 VDC or PoE (802.3af) power supply
The camera model described here is equipped with Smart Hybrid Light technology and has two types of illumination: IR and white light. How the illumination is used is decided by the user by selecting one of three modes- classic IR, white LED light and smart mode. The classic IR mode uses IR illumination in nighttime conditions or when the illumination level is too low. In white light mode, LED illumination is used instead of IR. In smart mode, the , camera triggers the LED light when it detects a human or vehicle silhouette, providing a color image. Once the object leaves the detection zone, the camera switches back to IR mode. In addition to illuminating the scene to provide a color image, the LED light has the additional function of deterring an intruder.
When there is no person or vehicle on the scene, the camera uses IR mode | When a person or vehicle appears on the scene, the camera turns on the LED illumination and switches to color mode | When a person or vehicle leaves the scene, the camera will switch back to IR mode |
This camera is part of the EasyIP 2.0 Plus series with AcuSense technology, which is based on Deep Learning algorithms. With AcuSense, the camera is able to classify detected human and vehicle objects and filter out all false alarms (e.g. animals, rain, cobwebs, moving leaves etc.) with an efficiency up to 98%. This improves the entire monitoring system performance, and the end user only receives information about alarms that meet the criteria. If the filter is not activated for a given event, the camera will detect all objects, as it was the case with previous solutions.
False alarm filtering in all channels and quick object search. Color images around the clock for ColorVu cameras with AcuSense. | False alarm filtering and quick search for objects on specific channels. | False alarm filtering for AcuSense cameras. Color images around the clock for ColorVu cameras with AcuSense. | 24/7 color video. False alarm filtering and quick search for objects on specific channels. |
The motion detection has been enhanced with AcuSense technology, allowing events to be filtered for human and vehicle silhouettes. This improves the performance of the entire system and reduces the number of false alarms that reach the user. Once the filter is turned off, detection can continue as before, detecting all objects.
Compression is a very important parameter proving the device advancement. The better the compression, the lower the bandwidth requirement with the same subjective quality. H.265 (HEVC - High Efficiency Video Coding) is currently the most efficient compression method. Compared to its predecessor (H.264), it reduces the data stream and the demand for disk capacity by half. Therefore, hard drives with a halved capacity can be used, or recordings can be stored for twice as long. Its improved version H.265+ has been optimized for use in CCTV monitoring systems. They allow for further reduction of data streams.
Compression efficiency comparison of H.264, H.265 and H.265+
iVMS-4200 is client software dedicated to the management and supervision of Hikvision security systems, such as DVRs (IP, TurboHD), video intercoms, access control, set-top boxes, etc. The software allows you to easily and conveniently monitor all systems by offering viewing from IP cameras, remote playback of recordings, remote configuration, handling of alarm events, two-way audio transmission, e-map support, recording to a HDD and many more.
Hikvision devices can be operated via mobile phones with Android or iOS using the dedicated Hik-Connect mobile application. It can be used to remotely view live video from DVR, NVR, IP cameras, door entry systems using Wi-Fi, 2G or 3G networks and also to view recorded videos. Operating video intercoms with the application provides also remote opening of the electric strike, receiving notifications and transferring calls from the entrance panel to the phone in the absence of the subscriber. The application allows connectivity via IP addresses and via P2P cloud. Hik-Connect is also the name of the cloud service that provides access to devices in the absence of an external IP address.
Extensive applications for the organization and use of CCTV systems
Our library provides an overview of applications dedicated for installers and users of monitoring systems based on Hikvision devices.
SADP (Search Active Device Protocol) is a free and easy-to-use software designed to search the local network for Hikvision brand cameras and DVRs, modify network parameters and restore passwords. For detailed information on password restoration (item 8) and operation of the program, please refer to the library SADP application – a tool for organizing CCTV systems based on HIKVISION devices in a local network.
Specifications
Model | DS-2CD2343G2-LI | ||
Product type | IP camera | ||
Brand | Hikvision | ||
Series | EasyIP 2.0 Plus, Standardowa | ||
Technologie | AcuSense, Smart Hybrid Light | ||
type | Standard | ||
Applications | Outdoor | ||
Housing | Dome, Turret, Vandal-proof | ||
Adjustment | 3-axis | ||
Color | White | ||
Reset button | Yes | ||
Moduł optyczny i obraz | |||
Sensor type | CMOS | ||
Sensor size | 1/2.9 | ||
Sensitivity (color mode) | lx | 0.005 @ (F1,.6, AGC ON) | |
Aperture | F1,6 | ||
Shutter speed | S | 1/3 – 1/100000 | |
Slow shutter | No | ||
Lens type | Fixed | ||
Focal length | mm | 4 | |
Viewing angle | horizontal | ° | 84 |
Field of depth | m | 1.5 to ∞ | |
Main stream | max. resolution | MP | 4 |
max. resolution | px | 2688 × 1520 | |
max. resolution | fps | 25 | |
Other image functions | AGC, AWB, 3D-DNR, BLC, HLC | ||
WDR | dB | 120 | |
Regions of interest ROI | 1 | ||
Corridor mode | No | ||
Privacy masks | 8 | ||
Target trimming | Yes | ||
Day/night mode | Yes | ||
Illuminator | |||
IR | Range | m | 30 |
wavelength | nm | 850 | |
illuminator type | EXIR | ||
White light | Range | m | 30 |
illuminator type | LED | ||
Video compression | |||
Compression methods | H.265+, H.265, H.264+, H.264, MJPEG | ||
Bitrate | 32 kb/s – 8 MBps | ||
No. of streams | 3 | ||
Data recording | |||
microSD slot | Yes | ||
Recording types | MicroSD (max. 512 GB), NAS | ||
ANR function | Yes | ||
Audio | |||
Audio support | No | ||
Image analysis (conventional algorithm) | |||
Basic incidents | Motion detection, Exception, Image tampering | ||
Intelligent image analysis (Deep Learning algorithm) | |||
Human, vehicle classification | Motion detection 2.0, Line crossing, Intrusion | ||
Network | |||
Protocols | TCP/IP, WebSocket, WebSockets, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1 × , QoS, Bonjour, IPv6, UDP, IPv4, SSL/TLS | ||
Standards | ISUP, Onvif (S,G profile), ISAPI, SDK | ||
Live view | 6 simultaneous channels | ||
Users | up to 32 (3 access levels: Administrator, Operator, User) | ||
Client applications | iVMS-4200, Hik-Connect, Hik-Central | ||
Supported browsers | Chrome 80+, Edge 89+, IE11, Safari 13+ | ||
Interfaces | |||
Ethernet | 1 × RJ-45 10/100 MBps | ||
Others | |||
Polish language supported | Yes | ||
Power supply | PoE | V | 36-57 (802.3af) |
PoE | W | max. 7 | |
DC | V | 12 | |
DC | A | 0.58 | |
DC | W | max. 7 | |
Housing material | Metal | ||
Protection rating | IP67, IK10 | ||
Operating temperature | °C | -30...+60 | |
Humidity | % | 95 or less (non-condensing) | |
Camera dimensions | mm | Φ127 × 96 | |
Weight | kg | 0.76 |