Support
Details
The dual-channel DVB-T modulator creates one digital RF multiplex with two channels carrying audio-video signals from two HDMI sources, connected through max. two HDMI connectors. it has 2x HDMI inputs and a RJ-45 port used for configuration purposes.
The dual-channel DVB-T modulator creates one digital RF multiplex with two channels carrying audio-video signals from two HDMI sources. High image quality is ensured by H.264 video compression and automatic bit rate adjustment in each of the channels (the MANUAL function also Aenables individual adjustments by the user). Configuration options allow adding the output RF signal to existing DVB-T signals distributed in the installation in a way chosen by the administrator/investor of the house/facility.
The source signal may come from a variety of devices: a multimedia player, DVR or Blu-ray player, PC, STB etc. The modulator can distribute high'quality content in the form of a DVB-T multiplex via typical RF coaxial cables used in antenna and CCTV systems.
RF modulators are used not only in antenna systems (MATV/SMATV). Sometimes, the distribution of signal A/V signals via coaxial cable (after conversion to a RF signal) is much simpler and less expensive than other solutions - especially in situations where the signal has to reach multiple points (receivers). An example is an electronics store, where an HDMI -> DVB-T modulator eliminates problems with splitters and tens of HDMI cables that could be used for the distribution of the demonstration content to tens of televisions.
All parameters can be configured via the RJ-45 port and a web browser (the default IP address: 192.168.1.15; password: 1234), or with the use of the buttons and display on the front panel.
Key features
- Dual-channel DVB-T modulator
- Can modulate signals from two HDMI sources and locate them in one DVB-T multiplex
- H.264 video compression and AUTO bit rate function for each stream (and MANUAL option)
- No limitation on HDMI sources (support for HDCP)
- Possibility of distributing HD signals up to 1080p @ 30/25 fps
- Ideal for (S)MATV systems, hotels, electronic stores, shopping malls, pubs etc.
- Simple installation, intuitive configuration
- Configuration via the RJ-45 port and a web browser or local buttons and display
Applications
- Hospitals
- TV for patients
- transmission from the operating rooms (for documentary/professional/scientific/educational purposes)
- education of students
- video monitoring
- advertising
- Stores and shopping malls
- promotional channels
- distribution of content from DVD/Blu-ray players
- distribution of HD/SD TV channels
- commercials
- Ships, large yachts, ferries
- on-board TV from media players
- news channels
- GPS/navigation information
- video monitoring
- Corporate TV solutions
- corporate TV channels
- training channels
- video conferences
- educational channels
- video monitoring
- Schools, colleges, universities
- transmission of lessons/lectures
- school/college/university TV
- news/educational channels
- broadcasts to laptops, iPads, etc.
- Sports facilities
- TV on stadiums, in halls and supporting facilities,
- HD video monitoring
- transmission of sports events in high definition
Specifications
Name | ST-6510 | ||
Code | R86602 | ||
DVB-T modulator | Standard | DVB-T COFDM | |
Constellation | 64QAM | ||
RF channel width | 6 MHz, 7 MHz, 8 MHz | ||
FFT mode | 8K | ||
Guard interval | 1/32 | ||
FEC | 7/8 | ||
MER | >36 dB | ||
RF range | 50-860 MHz | ||
RF output level | 70...100 dBμV | ||
Impedance | 75 Ω | ||
Inputs | Video | 2 x HDMI(HDCP): type A | |
Audio | 2 x HDMI: type A | ||
RJ-45 | 10/100M IP | ||
Encoder | Resolution | 1080p @30p/25p | |
Video compression | H.264/ AVC | ||
Audio compression | MPEG-1 Audio layer II (ISO/IEC 11172-3) | ||
Bit rate options | AUTO MANUAL | ||
PID settings | PMT/ Video/ Audio/ PCR | ||
PSI | NID/ ONID/ P.D.S./ TS ID | ||
LCN | Max. 4 digits, up to1023 | ||
General | RJ-45 port | For configuring | |
IP address | 192.168.1.15 | ||
Password | 1234 | ||
Supply voltage | 100-240 VAC / 50/60 Hz | ||
Power consumption | 20 W | ||
Oper. temp. range | 0...45°C | ||
Dimensions | 230×137×25 mm | ||
Specifications
Product type | Modulator | ||
type | Digital | ||
Series | DVB-T | ||
Model | ST-6510 | ||
Brand | SIGNAL | ||
Number of channels | two-channel | ||
Applications | Indoor | ||
No. of inputs | HDMI | 2 | |
No. of inputs | RF | 1 | |
No. of outputs | RF | 1 | |
HDCP support | Yes | ||
encoding | H.264 | ||
resolution | Full HD 1080p | ||
Stream flow rate | Mbps | automatic – AUTO function, manual setting – MANUAL function | |
Sekcja modulatora | |||
Standard at RF output | DVB-T COFDM | ||
Number of MUXes (carriers) at the RF output | 1 | ||
FFT mode | 2K/8K | ||
Operating band | MHz | 7.8 | |
Constellation | 64QAM | ||
Safety interval | 1/32 | ||
FEC | 7/8 | ||
MER | dB | ≥ 35 | |
RF frequency range | MHz | 50...860 | |
RF output level | dBµV | 70...100 | |
General | |||
Configuration | LCD + buttons, RJ-45 port --> IP address: 192.168.1.15, password: 1234 | ||
Power consumption | W | 20 | |
Dimensions | mm | 230 × 137 × 25 | |
Operating temperature | °C | 0...+45 | |
Weight | kg | 0.5 |