Support
Details
Antenna suitable for DVB-T/T2 signal reception
The Digit Activa A6080 DVB-T/T2 antenna has been designed to receive DVB-T signals in VHF (174-230 MHz) and UHF (470-790 MHz) bands. The built-in amplifier increases signal levels only in the UHF band. The compact antenna can be used in areas with decent signal levels. It can be mounted (in horizontal position) on roofs, walls, balconies, as well as on camping trailers/caravans.
The antenna can be mounted (in horizontal position) on roofs, walls, balconies, as well as on camping trailers/caravans.
Very low standing wave ratio (SWR≤2.2) shows very good impedance matching of the antenna.
Weather-resistant housing of the antenna made of high quality ABS plastic ensures low weight and guarantees long life of the device.
Distinguishing features
- Designed for receiving DVB-T/T2 broadcasts
- Built-in DIGITactiva amplifier
- Strong attenuation of GSM signals,
- SWR≤2.2,
- Weather-resistant
- Simple installation without any tools
The built-in amplifier can be powered directly from the input of a DVB-T/T2 tuner/receiver (5 VDC) or, if not possible, from the included power supply.
For indoor use we recommend the A6030 antenna.
Below we present results of measurements of DIGIT antenna without amplifier - gain, directional characteristics and polar plot. In the case of the Digit Activa A6080 antenna, it is necessary to add the gain of the built-in amplifier (18 dB +/-4 dB).
Specifications
Name | DIGITactiva |
Code | A6080 |
Frequency range | UHF 470-862 MHz VHF 174-230 MHz |
Polarization (UHF) | Horizontal (H) |
Gain in UHF band | 18 ± 4 dB |
Gain in VHF band | 0 dB |
Standing wave ratio (SWR) | ≤2.2 |
Noise figure | 2 dB |
Max output level (two TV multiplexes) | 103 dBμV |
H beamwidth (3 dB) | 75º |
V beamwidth (3 dB) | 130º |
Front/back ratio | > 15 dB |
Power | 5…24 VDC (or 12 VDC from the included PSU) |
Current consumption | 45 mA / 12 VDC |
Mast diameter range | 25...45 mm |
Weight | 0.8 kg |
Specifications
Antenna type | TV DVB-T/T2 | ||
Name | Digit Activa | ||
Manufacturer | Telmor | ||
RF antenna type | Multiband, Balcony | ||
Specifications | |||
Impedance | Ohm | 75 | |
Operating band | VHF+UHF | ||
Frequency range | MHz | 470 – 694 | |
Channels | 21 – 48 | ||
Max gain. | dBi | 4,5 | |
Radiation pattern front/back | dB | > 15 | |
Standing wave ratio | < 2.2 | ||
Polarization | H | ||
Amplifier | |||
Built-in amplifier | Yes | ||
Amplified band | VHF, UHF | ||
Amplifier | Input impedance | Ohm | 300 |
input impedance | Ohm | 75 | |
Gain | dB | 22 | |
Max. mast/tube diameter | mm | 40 | |
Power supply | voltage | V | 12 |
current | mA | 45 |