DVB-T/T2 & DVB-C Signal Meter: Digiair PRO T/T2/C

Code: R10511

This product is no longer available

Estore: Library:

Fast shipping

We ship immediately, according to the order of purchases.

Support

Any questions or comments?

Write to us!

Details

View of the meter in its rubber casing

View of the meter without the casing

Back view - visible eight AA rechargeable batteries

The included AC/DC adapter (12 VDC output) and carrying strap

A short demonstration of the functions of Digiair PRO meter

The Digiair PRO T/T2/C R10511 meter has been designed and manufactured by engineers of Emitor company in Sweden. This company has many years of experience in the production of measuring devices for terrestrial and satellite television systems.

Measurements of digital signals (BER, MER, constellation diagram).


Signal levels of six channels	Pre-BER, Post-BER, SNR of E42 ch.

The device has been designed to assist installers in adjusting TV antennas. It measures parameters of analog TV and digital DVB-T - COFDM signals, which is necessary for diagnosing antenna systems. The biggest advantage of this meter is the ability to measure bit error rate (BER) and modulation error ratio (MER) of digital signals. These parameters are critical for proper operation of systems using digitally modulated signals. The R10511 meter enables the user to define and store in its memory up to 5 lists, each grouping 6 channels or multiplexes that are used in a certain area.


Spectrum analysis	MER and constellation diagram

High sensitivity, power supply for antenna preamplifiers.

Digiair PRO T/T2/C is a very sensitive meter detecting even the weakest signals (30 dBuV). It can supply antenna preamplifiers (with 0/5/12/24 V voltage). Built-in cut-out protects the device from possible short circuits.

Practical power supply.

The meter is recommended for all installers of terrestrial TV antennas. Its power supply is provided by 8 AA rechargeable batteries. Operating time depends on the function of the meter, but when using the fully charged batteries is not shorter than 2 hours. In the event of a particularly difficult, time-consuming installation, the meter can be supplied with typical alkaline batteries (AA/R6 1.5 V).

LCD display with high contrast.

The Digiair PRO T/T2/C meter is equipped with a backlit LCD display so the measurements can be performed even in adverse lighting conditions.

Main features:

Frequency range: 45-860 MHz
Measurements of DVB-T/T2/C signals
Measurements of signal levels in dBμV, dBm, dBmV
High sensitivity: 30 dBuV
Simultaneous measurements of up to six channels
Channel lists
Measurements of the major parameters of digital signals: Pre-BER, Post-BER, MER
Signal spectrum analyzer
DVB-T COFDM signal constellation diagram
Maxhold function
Power supply for antenna preamplifiers (5, 12, 24 V)
Handy size and shape
AC adapter/charger included

The device is covered by a two-year warranty.

Name		Digiair PRO T/T2/C
Code		R10511
Frequency range [MHz]		48-860
Signal level range [dBuV]		30-80
Attenuator [dB]		-20
Antenna preamp. supplying voltage [VDC]		0, 5, 12, 24
Protection against short circuit		YES
Measurements	digital signals	preBER postBER MER SNR constellation diagram
	analog signals	RF signal level (dBμV) of up to 6 channels spectrum analyzer audio level
Supplying voltage [VDC]		10-15
Current consumption [mA]		max 500
Rechargeable battery		8x AA (1200 mAh)
Display		LCD 128x64 px
Dimensions [mm]		185x115x50
Weight [kg]		0.30
Accessories		AC/DC adapter (output: 12 VDC, 1 A) Rubber case Car charger

Specifications

Nazwa	Język	Typ pliku	Wielkość pliku	Data
Instrukcja obsługi	PL		0.25 MB	2010.09.20
Instrukcja obsługi	EN		0.23 MB	2010.09.20
Ulotka reklamowa	PL		550 KB	2010.10.08
Oprogramowanie wersja 2.0.20	PL		630 KB	2011.08.25