Part 2 of 3 of the guide on how to measure signals in a SAT TV system. In this part, we will show you how to set up Unicable and Wideband LNBs using Signal WS-6980 meter.
This product is no longer available
Replacements
Support
Details
The ST-5150 R10842 meter measures satellite DVB-S/DVB-S2 (HD), terrestrial DVB-T/DVB-T2 (HD) and cable DVB-C signals. It has a color TFT LCD display. The meter is ideal for setup of every TV and SAT TV antenna system. The applications include positioning of satellite dishes and terrestrial antennas, tuning of filters, adjustment of settings of amplifiers. Thanks to built-in receiver, the user can monitor the currently tested FTA channel. The monitoring of the tested channels and intuitive operation accelerate installation work. An unquestionable advantage of the device is a user-friendly menu, making easier the work of users without much experience in this field. An external HDMI output can feed the received channel to a TV/monitor screen via a cable. The device allows the user to measure such parameters as signal level expressed in dBμV, C/N and MER parameters.
Key features
- measurement of DVB-T/T2/C and DVB-S/S2 signals (fully compatible with MPEG-2/MPEG-4)
- DVB-T2 support with H.265
- monitoring of the analyzed channel on an LCD
- built-in video decoder: MPEG-2/H.264/H.265
- percentage indication of signal strength and quality
- measurement of all required parameters such as: signal level in dBμV, C/N, BER, MER
- 7.4 V/2600 mAh Li-Ion battery
- editable satellites, transponders, frequencies
- DiSEqC: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), wideband support
- USB port (file format supported: wma,mp3,mp4,avi,jpg,jpeg,bmp,img)
- short-circuit protection in satellite path (LNB)
The meter supports the ETSI TS 101 154 part 5.14.1 i 5.14.2 (HDTV) for a 50 Hz HEVC 8-bit HDTV receiver (resolutions 1920 x 1080 p50, 1280 x 720 p50).
Notice: the warranty period for the rechargeable battery is 12 months.
Specifications
Product type | Meter | ||
Meter type | Combo | ||
Brand | SIGNAL | ||
Model | ST-5150 | ||
Measured parameters | Signal power level, MER, BER, C/N | ||
Monitoring of channels | Yes | ||
Display | p | 480 × 272 | |
video decoding supported | MPEG-2, MPEG-4/H.264, H.265 | ||
Specifications | |||
Receiver DVB-T/T2/C | Frequency range | MHz | 48...862 |
Receiver DVB-T/T2/C | Signal strength | dBm | -79.5...-35 |
Antenna supply | V | 5, 12, 24 | |
Connector | F-socket | ||
Receiver DVB-S/S2 | Frequency range | MHz | 950...2150 |
Receiver DVB-S/S2 | Signal strength | dBm | -65...-25 |
converters supported | Fullband, Unicable (dSCR), Wideband | ||
DiSEqC | Yes – 1.0, 1.1, 1.2 | ||
LNB supply | V | 13/18 (max. 400 mA) | |
Connector | F-socket | ||
Power supply | |||
Power consumption | W | 10 | |
Battery | type | Li-Ion 7.4 V | |
Battery | capacity | mAh | 2600 |
Other information | |||
Additional connectors | A/V, HDMI, USB | ||
Accessories | wall charger | ||
Dimensions | mm | 170 × 120 × 40 | |
Weight | kg | 1 |
Videos
Part 1 of 3 of the guide on how to measure signals in a SAT TV system. In this part, we will show you how to set up the SAT antenna + Quatro LNB using the Signal WS-6980 meter.