English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The PR-310 amplifier is used to amplify RTV/SAT signals in the 5 - 2400 MHz band.
• Gain 10 dB
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
The AL-105 power supply is used to supply power to Alcad mast-mounted antenna amplifiers supplied with 12 V DC.
• Applied to power Alcad mast-mounted amplifiers supplied with 12 V DC
• Current capacity 100 mA
• Number of outputs: 2
• Current capacity 100 mA
• Number of outputs: 2
First-class precisely made coaxial antenna plug. Full shielding of the device prevents penetration of interference into the antenna installation. The plug fits the common IEC standard antenna sockets.
• IEC plug
• High quality
• Full shielding
• High quality
• Full shielding
Antenna amplifier AI-200 VHF/UHF (1 in/2 output) used in small and medium TV installations to distribute the signal to several receivers.
• Home amplifier with built-in splitter
• Maximum gain 24 dB
• Gain adjustment for VHF/FM and UHF band
• Maximum output signal level 105 dBμV
• Maximum gain 24 dB
• Gain adjustment for VHF/FM and UHF band
• Maximum output signal level 105 dBμV
The MM-307 UHF-UHF-VHF/FM mast crossover on F-connectors is used as a combining element for signals from 3 antennas, mounted on an antenna mast.
• The diplexer allows for the summation of the FM+VHF band (47-260 MHz) and the 2xUHF band (470-862 MHz)
• F connectors
• Mounted on the antenna mast, near the antenna set
• Cased inside a compact plastic housing
• F connectors
• Mounted on the antenna mast, near the antenna set
• Cased inside a compact plastic housing
CA-215 VHF/UHF antenna amplifier (1 in/2 output) for small and medium TV installations. The preamplifier can be supplied with 12 V DC.
• Amplifier for home antenna systems with two outputs
• Max gain of 25 dB
• Separate gain adjustment in VHF/FM and UHF bands
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
• Max gain of 25 dB
• Separate gain adjustment in VHF/FM and UHF bands
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
The AI-223 amplifier is used as a subscriber amplifier to distribute the signal from cable TV or a collective installation to several receivers.
• Amplifier for home antenna systems with two outputs
• Passive return channel 0-65 MHz
• Max gain of 25 dB
• Gain adjustment in VHF/FM range
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
• Passive return channel 0-65 MHz
• Max gain of 25 dB
• Gain adjustment in VHF/FM range
• 12 VDC power option for a preamplifier
• Max output level of 105 dBμV
Masthead antenna amplifier AM-346 dedicated for RF systems powered by 24 VDC.
• Supply voltage 24 V
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case
• Number of inputs: 3
• Number of outputs: 1
• 20 dB of gain in the FM+VHF band and 32 dB gain in the UHF band
• 2 On/Off potentiometers that allow 24 VDC voltage and 50 mA current to be sent to antenna preamplifiers through each of the two UHF inputs
• Die-cast housing inside a compact plastic case
The MM-214 RTV/SAT diplexer with F-connectors is used as an element which sums up signals from terrestrial and satellite TV antennas.
• RTV/SAT signal booster
• Mounted on a mast near the antenna set
• Allows one cable to transmit signal from satellite converter and terrestrial TV antenna
• Mounted on a mast near the antenna set
• Allows one cable to transmit signal from satellite converter and terrestrial TV antenna
