EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
PoE switch acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear operational and identification status indication
• Low power consumption (< 0.5 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
PoE switch in IP68 casing acting as LAN extender/repeater. Allows the connection of 3 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at, 802.3bt or PoE Passive (PoE IN port)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
• Increases and splits the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 3 PoE 802.3af/at receivers
• Up to 60 W total power when powered via UTP
• High IP protection (IP68)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and identification
• Low power consumption (< 0.5 W)
• Easy and quick start-up without configuring parameters
• Wide operating temperature range (-25°C...+65°C)
Gigabit PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Allows ATTE modules and extenders to be mounted on a standard TH35 DIN rail.
• Allows ATTE modules and extenders to be mounted on a standard DIN rail
The extender set extends the range of the LAN (PoE) on the UTP cable up to 800 m. It is applicable when the PoE switch-receiver distance exceeds 100 m.
• Power supply possible from PoE switch in 802.3af, 802.3at standard, or PoE Passive (PoE IN port)
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
• Power available to PoE receiver up to 800 m (10 Mbps)
• 100 Mbps available up to a maximum of 500 m
• Clear operating status and bandwidth indication
• Easy and quick start-up without configuring parameters
• Small size of the device enabling installation in small spaces, e.g. in a camera base
• Wide operating temperature range
Gigabit PoE splitter with 12 V output, compliant with 802.3af/at/bt, ideal for powering devices with power consumption of up to 40 W.
• Large range of output power up to 40 W
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
• Power supply to 12 V DVR via PoE 802.3bt or ATTE switch
• Power supply from PoE switch (802.3af/at/bt) or passive PoE (44-56 V)
• High energy efficiency of over 90%
• Suitable for 10/100/1000 Mbps networks
• Compact dimensions for installation in small enclosures
A compact Gigabit Ethernet-SFP converter with a wide supply voltage range of 12-58 V.
• 10/100/1000 autonegotiation on LAN port + PoE
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
• Power supply via screw connector (Vin) wide input voltage range
• Easy and quick commissioning without configuring parameters
• Very low power consumption (< 1.5 W)
• Small module size
Gigabit, 5-port PoE switch with LAN extender function, ideal for connecting multiple devices (e.g. IP cameras) via a single UTP cable.
• Can be powered from another PoE switch in 802.3af, 802.3at, 802.3bt60, 802.3bt90 or PoE Passive (PoE IN port) standards
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
The device reduces the voltage on the DC plug to 12 V and simultaneously transfers PoE power to the RJ45 output.
• PoE voltage reduction from 48 V to 12 V – available at a DC plug (illuminator, microphone, heater)
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
• Provides PoE power supply from the input to the RJ45 output (camera power supply)
• Can be powered with PoE 802.3af or PASSIVE switch
• Compact module size
