EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
Switch for 5 IP cameras, in outdoor housing, 6-port 10/100 Mbps (5xPoE + 1xUplink), PoE power supply on 4 pairs, integrated power supply 55 V 90 W.
• Compact size
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
• Powering 5 PoE 802. 3at/af or PASSIVE receivers
• Power can be switched off on selected PoE ports
• Clear optical indication of power and data transmission status
• Up to 40 W power per single PoE port (total 90 W power budget)
• Easy and fast startup without having to configure parameters
• High efficiency of integrated power supply (>90%)
• Additional screw connector makes it easy to pick up 55 VDC power to other devices
• Scalability by attaching additional switches of xPoE/IP series and IPB/IPUPS
• Supply of cables can be hidden inside the enclosure
• Cable exit through 2x29 mm rubber glands installed in the enclosure
• Cables with crimped plugs (after cutting the plugs) can be inserted
• Power cable and 2 brackets included for enclosure installation without compromising the IP55 protection degree
The xPoE-4-11A-HS has been designed as LAN extender (repeater) and PoE power supply.
• Compact device size
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100 Mbps switch)
• Up to 40 W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5 W)
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100 Mbps switch)
• Up to 40 W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5 W)
PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 100 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Small size of the device for installation in small spaces, e.g. in a camera base
• Low power consumption of the device (< 0.3 W)
• Easy and quick commissioning without configuring parameters
• Wide operating temperature range
Gigabit PoE switch acting as LAN extender/repeater. Allows the connection of 2 devices (e.g. IP cameras) or the creation of network branches on a single UTP cable.
• Can be powered from another PoE switch using 802.3af, 802.3at or PoE Passive (PoE IN port)
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Enhances and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 2 PoE 802.3af/at receivers
• Up to 30 W total power when powered from UTP
• Throughput of up to 1000 Mbps
• Low power consumption (< 0.3 W)
• Small size of the device for installation in small spaces, e.g. in a camera base
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Gigabit, 5-port PoE switch with LAN extender function, ideal for connecting multiple devices (e.g. IP cameras) via a single UTP cable.
• Can be powered from another PoE switch in 802.3af, 802.3at, 802.3bt60, 802.3bt90 or PoE Passive (PoE IN port) standards
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Increases and distributes the network signal (fully functional 1000 Mbps switch)
• Cascade power supply (one switch powers another)
• Capable of powering up to 4 PoE 802.3af/at/bt60 receivers
• Up to 90 W total power when powered via UTP
• Throughput of the device at 1000 Mbps
• Clear operating and identification status indication
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
Allows ATTE modules and extenders to be mounted on a standard TH35 DIN rail.
• Allows ATTE modules and extenders to be mounted on a standard DIN rail
Universal 12/24 V buffer module to ensure continuity of power supply to the vehicle's equipment and to protect the main battery from discharge.
• Possibility to build a buffer system in vehicle installations
• Maintains equipment in operation when the engine is switched off without the risk of discharging the main battery
• Automatic power supply detection minimising interference with the vehicle's electrical installation.
• Supports 12 V and 24 V systems
• Power output up to 140 W (for 24 V / 24 V configuration)
• Clear LED indication of operating mode and battery level
• Wide operating temperature range: -25°C to +65°C
• Maintains equipment in operation when the engine is switched off without the risk of discharging the main battery
• Automatic power supply detection minimising interference with the vehicle's electrical installation.
• Supports 12 V and 24 V systems
• Power output up to 140 W (for 24 V / 24 V configuration)
• Clear LED indication of operating mode and battery level
• Wide operating temperature range: -25°C to +65°C
A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range via coaxial cable up to 500 m at 100 Mbps
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
• Interference immunity and watchdog function in COAX path
• Power supply from 802.3at/af PoE switch or PoE PASSIVE switch
• Power supply capability for 802.3at/af PoE or PoE PASSIVE receivers
up to 30 W total power across the entire power path
• Very low power consumption - 1.35 W total path
• Small module size
• Clear optical indication of power and data transmission status
• Easy and quick start-up without configuring parameters
Universal PoE adapter with integrated voltage-reducing adapter. Three different voltages can be obtained at the output: 5 V, 12 V or 24 V and PoE.
• Supports output voltages of 5 V, 12 V or 24 V via twisted pair
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
• Non-standard PoE configuration possible, e.g. 24 V PoE passive
• Power output up to 20 W
• High energy efficiency >90%
• Works in 10/100/1000 Mbps networks
• Full compatibility with 802.3af/at PoE switches
• Compact dimensions for installation in limited space (e.g. in the camera base, at the door station)
PoE switch with integrated power supply in a DIN4 housing for mounting on a TH35 rail. It allows up to 3 IP PoE devices to be powered.
• Powers up to 3 PoE 802.3af/at/bt60 receivers
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
• Up to 120 W total power from the power supply
• High module efficiency >90%
• Redundant power supply (ensures power continuity through a second module)
• Built-in LR150 function increases maximum transmission distance to 150 metres
• Clear indication of operating status and power consumption
• Easy and quick start-up without configuring parameters
• Wide operating temperature range
