English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The Delta DRC-24V60W-1AZ 60 W switched-mode power supply is designed to supply power to electronic equipment that requires 24 VDC supply.
• Power output: 60 W
• Output voltage: DC 24 V
• Output voltage adjustment range: DC 24 - 28 V
• Output current: 2,5 A
• Protection: overload, overvoltage, short circuit
• Output voltage: DC 24 V
• Output voltage adjustment range: DC 24 - 28 V
• Output current: 2,5 A
• Protection: overload, overvoltage, short circuit
The package includes two steel tapes, each 5 m long. They are wrapped around a chimney to hold an antenna mast firmly in place. If the tape is too short, additional 10 m reels can be ordered - E8520. The weight of the clamp: 2.75 kg.
• For mounting masts to chimneys
• Easy installation
• Two steel tapes (5 m long) included
• Optional 10 m reels available
• Weight: 2.75 kg
• Easy installation
• Two steel tapes (5 m long) included
• Optional 10 m reels available
• Weight: 2.75 kg
The package includes two steel tapes, each 5 m long. They are wrapped around a chimney to hold the antenna mast firmly in place. If the tape was to too short, additional 10 m reels can be ordered - E8520. Weight of the clamp: 3.76 kg.
• Antenna chimney mount,
• Mast-chimney distance: 170 mm,
• For masts with diameters 38-50 mm,
• Fixing with two steel tapes (2x 5 m),
• Weight: 3.76 kg.
• Mast-chimney distance: 170 mm,
• For masts with diameters 38-50 mm,
• Fixing with two steel tapes (2x 5 m),
• Weight: 3.76 kg.
The bracket is made of flat bar 4 mm thick and welded steel pipe, covered with white powder lacquer. Plastic cap prevents water from getting inside. Suitable for mounting antenna mast to a wall. Total weight: 2 kg.
• Wall mast mount
• For masts with diameter 38-50 mm
• Support guarantying stability
• Width: 360 mm
• Distance between mast and wall: ca. 210 mm
• Weight: 2 kg
• For masts with diameter 38-50 mm
• Support guarantying stability
• Width: 360 mm
• Distance between mast and wall: ca. 210 mm
• Weight: 2 kg
• Wall mast mount
• Support guarantying stability
• Width: 550 mm
• For masts with diameter 38-50 mm
• Distance between mast and wall: ca. 365 mm
• Support guarantying stability
• Width: 550 mm
• For masts with diameter 38-50 mm
• Distance between mast and wall: ca. 365 mm
The OR-30-50R90-150 E8558 bracket is used for the parallel installation of two tubular masts. The distance between the masts can be adjusted by setting the length of the arm in the range of 300-500 mm.
The double-mast clamp is used for installing two masts in parallel.
The UMA-50R100 103 cm adjustable bracket is designed for mounting television antennas and data transmission antennas.
• Can be installed on flat or sloping rooftops
• Universal, easy to install
• Ideal for mounting DVB-T, WiFi/WLAN antennas
• Universal, easy to install
• Ideal for mounting DVB-T, WiFi/WLAN antennas
The MB-3/PLUS E8744 ballast mast base can hold terrestrial TV and communications/Wi-Fi antennas.
