The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-6 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-6 cable family
The monolithic angle compression connector, made of nickel-plated brass, is designed for RG-59 type cables.
• Connector type: BNC compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the RG-59 cable family
The monolithic nickel-plated brass F-connector is designed for Triset-11 PE cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
Monolithic, made of nickel-plated brass, the 90 F 113 angle connector (screw-on) is designed for TRISET cables.
• Connector type: F compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
The monolithic nickel-plated brass F-connector is designed for TRISET cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
The monolithic nickel-plated brass F-connector is designed for RG-6 Tri-Shield cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
The insulation stripper is a high-quality, multi-purpose tool used to prepare coaxial cables for the application of connectors.
• Versatile tool for preparing coaxial cables to install connectors
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
90 F IEC 113 MASTER compression angle socket for TRISET-113 cable.
• Connector type: IEC female angled
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
IEC 113 MASTER compression F socket for Triset-113 cable.
• Connector type: IEC female
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
Monolithic, made of nickel-plated brass, the 90 QF 113 angle compression connector is designed for TRISET cables.
• Connector type: F compression, angled, 'quick'
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables



