English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The ZBF-12-4A-17Ah M1862 buffer power supply has been designed to ensure continuous supply for devices requiring 12 VDC stabilized voltage (adjustable within 10.5-13.8 V range). Its switch-mode converter shows 74% efficiency and provides stable output DC voltage (+/-1% of the set value, ripple and n...
It is one-input, four-output antenna amplifier for small TV installations. The12V/100mA (output) stabilized power supply is included in the set. The amplifier has switch allowing to provide +12 V power to preamplifier installed near the antenna. It can be also fed through one of the outputs (via coa...
• Inputs: 1: 87-774MHz
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
The broadband amplifier AWS-1241 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To us...
The AC15UV B2512 amplifier is used to strengthen terrestrial TV signals in VHF and UHF bands (170...694 MHz).
The broadband amplifier AWS-1242 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To us...
The ASP-8W LUX broadband antenna with LNA-177 amplifier receives DVB-T/T2 TV signals in the VHF and UHF bands in horizontal polarization.
• Performs in densely built-up areas
• Gain up to 14 dBi
• Built-in LNA-177 30 dB amplifier
• UHF and VHF bands
• Wide half power angle
• Power supply included
• Gain up to 14 dBi
• Built-in LNA-177 30 dB amplifier
• UHF and VHF bands
• Wide half power angle
• Power supply included
The broadband amplifier AWS-1244 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To us...
The R70501 SA-51 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed on the input of the SMATV system, the device amplifies and equalizes the signals before further distribution.
• Amplifier with power supply designed for 5-input multiswitches
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
The R70511 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed at the input of an SMATV system, the device amplifies and equalizes the signals before further distribution (four SAT IF signals - polarizat...
The SA-91L R70901 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals.
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
