English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The ZBF-12-4A-17Ah M1862 buffer power supply has been designed to ensure continuous supply for devices requiring 12 VDC stabilized voltage (adjustable within 10.5-13.8 V range). Its switch-mode converter shows 74% efficiency and provides stable output DC voltage (+/-1% of the set value, ripple and n...
The R70501 SA-51 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed on the input of the SMATV system, the device amplifies and equalizes the signals before further distribution.
• Amplifier with power supply designed for 5-input multiswitches
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
The R70511 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed at the input of an SMATV system, the device amplifies and equalizes the signals before further distribution (four SAT IF signals - polarizat...
The SA-91L R70901 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals.
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
The SA-91DL R70911 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals. The device is used as interstage...
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components (when used together with R71465 PSU): LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components (when used together with R71465 PSU): LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
The amplifier can improve FM reception in low-signal areas. It is an ideal device for cooperation with majority of the offered FM antennas. 75 ohm input/output impedance, compliance with CE standards.
Optical blank plugs are used to close unused openings in front panels of fiber optic devices so that dust does not enter them. This item fits holes for SC simplex adapters.
Signal GSM-305 A6765 repeater amplifies the GSM signal and distributes it inside buildings. The amplification coverage is approx. 300 sqm.
• Operating band 880-915, 925-960 MHz (GSM+EGSM)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
Signal GSM-505 A6775 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network is sufficient to use mobile phones outside buildings, but is inadequate for indoor operation. Such locations include some remote places (long distances to bas...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
Signal GSM-1205 A6785 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network allows for use of mobile phones out of buildings, but is insufficient for indoor operation. Such locations include some remote places (long distances to base...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
