The LED unit is used for lighting components, accessories or devices in 19" RACK cabinets. The LED panel is powered from a 230 VAC outlet. It has on/off switch in the upper part. The AC power cord length is 2 m.
YTDY cable consisting of 6 wires with copper cores of 0.5 mm diameter. Designed for use in alarm and intercom systems.
YTDY cable consisting of 8 wires with copper cores of 0.5 mm diameter.
YTDY cable consisting of 10 wires with copper cores of 0.5 mm diameter. Designed for use in alarm and intercom systems.
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The RV-1/2P-UHD multiplexer is designed to split signals from two sources without any loss of quality of the signal.
• Signal splitting from 1 to 2 outputs
• Input splitting configuration with jumpers
• Input splitting configuration with jumpers
Meter TZU 22 DVB-T Finder is intended for individual Terrestrial antennas.
• Frequency range 47-862 MHz
• Power supply via set top box
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Connector power supply 3,5 mm jack
• PWR RF range 50-80 dBuV
• Power supply via set top box
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Connector power supply 3,5 mm jack
• PWR RF range 50-80 dBuV
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2A
• USB type A port
• Color: black
• Output current 2A
• USB type A port
• Color: black
The AS07STCA-4K certified signal meter can measure DVB-S/DVB-S2 (4K) satellite signal, DVB-T/T2 (4K) terrestrial TV signal in HEVC 10 Bit compression and C/J.83B/ISDB-T cable signal.
• Measurement of DVB-T/T2/C/J.83B/ISDB-T and DVB-S/S2 signals
• Support for DVB-T2 with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, MER, Link Margin, CBER, VBER
• USB connector (possibility to take a screenshot of current signal measurement, export measurements to .csv file)
• RF signal measurement in the range of 20...100 dBμV
• View of the received channel on the touch screen TFT-LCD display size 7" with high resolution 4K
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Real-time signal spectrum analyzer for detecting interference from LTE signals
• Constellation display
• Large Li-On 7.4 V/7000 mAh battery – enough for about 3-4 h of continuous operation
• Efficient and easy-to-use user interface.
• Support for DVB-T2 with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, MER, Link Margin, CBER, VBER
• USB connector (possibility to take a screenshot of current signal measurement, export measurements to .csv file)
• RF signal measurement in the range of 20...100 dBμV
• View of the received channel on the touch screen TFT-LCD display size 7" with high resolution 4K
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Real-time signal spectrum analyzer for detecting interference from LTE signals
• Constellation display
• Large Li-On 7.4 V/7000 mAh battery – enough for about 3-4 h of continuous operation
• Efficient and easy-to-use user interface.