English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Signal-HD HDMI Switcher 3x1 (H3131) enables the user to connect up to three sources of high-definition signals to a modern TV set equipped with HDMI input. The amplified output signal can be transmitted via HDMI 1.3b cable over distance up to 15 m. The choice of the device from which the signal is c...
• Enables connection of three devices to one HDMI input
• Input signal selected with remote control
• Support for 12-bit Deep Color
• Maximum resolutions: 1080p, 1920 x 1200
• Input signal selected with remote control
• Support for 12-bit Deep Color
• Maximum resolutions: 1080p, 1920 x 1200
Signal HD HDMI Splitter 1x4 (4K*2K) H3216 enables the user to connect 4 modern televisions/monitors equipped with HDMI inputs to a source of high-definition signal. This splitter can amplify and buffer the signal.
• Easy installation
• HDMI signal distribution to 4 monitors/TVs
• EDID function
• Support for HDMI 2.0
• Support for HDCP 1.4 HDCP 2.2
• Support for 4K x 2K resolution at 60 Hz
• Support for TS Digital, Dolby Digital, DTS-HD, Dolby True HD.
• HDMI signal distribution to 4 monitors/TVs
• EDID function
• Support for HDMI 2.0
• Support for HDCP 1.4 HDCP 2.2
• Support for 4K x 2K resolution at 60 Hz
• Support for TS Digital, Dolby Digital, DTS-HD, Dolby True HD.
Signal-HD HDMI Splitter 1x8 enables the user to connect up to 8 modern TV sets equipped with HDMI inputs to a source of high-definition signal. The amplified output signals can be transmitted via HDMI 1.4 cables over distances up to 15 m. This product is ideal for demonstration of HD and 4K televisi...
• Easy installation
• HDMI signal distribution to up to 8 monitors/TVs
• Support for HDMI 1.4
• Support for 4K resolution
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Support for 12-bit Deep Color (36 bits for all channels)
• Gilded connectors
• HDMI signal distribution to up to 8 monitors/TVs
• Support for HDMI 1.4
• Support for 4K resolution
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Support for 12-bit Deep Color (36 bits for all channels)
• Gilded connectors
Signal-HD HDMI 2.0 Splitter 1x8 H3219 enables the user to connect up to 8 modern televisions/monitors equipped with HDMI inputs to a source of high-definition signal. The amplified output signals can be transmitted via HDMI 2.0 cables over distances up to 15 m. This product is ideal for demonstratio...
• New! 8-output HDMI splitter with support for 4K
• Easy installation
• HDMI signal distribution to 8 monitors/TVs
• Support for HDMI 2.0
• Support for 4k x 2k resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Easy installation
• HDMI signal distribution to 8 monitors/TVs
• Support for HDMI 2.0
• Support for 4k x 2k resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
The HDMI fiber optic converter allows for connection of HD signal to a receiver (TV, monitor) via optical network. IR extender.
• Transmission of HDMI signal via one single-mode fiber
• Max range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
• Max range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
Sealed box designed for mounting to the pole or wall. Designed for CCTV systems. A mounting plate and two DIN rails are provided inside the box.
• Designed for CCTV systems
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
Single-channel digital HDMI - DVB-T modulator dedicated to small systems.
• Digital HDMI-DVB-T modulator
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
Modulator Signal-420 HDMI – 1×COFDM (DVB-T) enables the conversion of signals from one HDMI source to the DVB-T standard.
• HDMI to DVB-T modulator proven in many systems
• Conversion of signals from any HDMI sources
• High quality digital HD/SD output signal
• Ideal for SMATV/MATV systems, hotels, electronics stores, shopping malls, pubs etc.
• Simple installation, intuitive configuration
• Selectable parameters such as LCN, SID, PID, NIT
• Conversion of signals from any HDMI sources
• High quality digital HD/SD output signal
• Ideal for SMATV/MATV systems, hotels, electronics stores, shopping malls, pubs etc.
• Simple installation, intuitive configuration
• Selectable parameters such as LCN, SID, PID, NIT
The tap is CE certified. Its operating frequency range is 5-1000 MHz. The product ensures good quality and suitability for professional use. The tap is equipped with F connectors and cast aluminum housing.
Signal-HD HDMI 2.0 Splitter 1x2 H3213 enables the user to connect 2 modern televisions/monitors equipped with HDMI inputs to a source of high-definition signal. The amplified output signals can be transmitted via HDMI 2.0 cables over distances up to 15 m. This product is ideal for demonstration of H...
• Easy installation
• HDMI signal distribution to 2 monitors/TVs
• Support for HDMI 2.0
• Support for 4K x 2K resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• HDMI signal distribution to 2 monitors/TVs
• Support for HDMI 2.0
• Support for 4K x 2K resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
The Signal HDMI H3601 converter/extender allows for transmission of HDMI signal over longer distances via minimum Cat. 5 twisted pair cable. There is also the possibility of IR remote control extension. The extender kit consists of transmitter and receiver units.
• New! Transmission via a single Cat. 5/5e/6 cable
• Transmission speed up to 10.2 Gb/s
• Support for 1080p
• Maximum range (Cat. 5): 80 m
• Maximum range (Cat. 5e): 100 m
• Maximum range (Cat. 6): 120 m
• IR remote control extender
• Transmission speed up to 10.2 Gb/s
• Support for 1080p
• Maximum range (Cat. 5): 80 m
• Maximum range (Cat. 5e): 100 m
• Maximum range (Cat. 6): 120 m
• IR remote control extender
The Signal HDMI H3603 converter/extender allows for transmission of HDMI signal over long distances via minimum Cat.6 twisted pair cable. The set can also extend IR control signals. The extender kit consists of transmitter (sender) and receiver units.
• Transmission via a single Cat. 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Support for 4K x 2K 60Hz
• 4K x 2K 30 Hz - maximum range (Cat. 6/6A/7): 60 m
• 4K x 2K 60 Hz - maximum range (Cat. 6/6A/7): 30 m
• IR remote control extender
• Transmission speed up to 18 Gbps
• Support for 4K x 2K 60Hz
• 4K x 2K 30 Hz - maximum range (Cat. 6/6A/7): 60 m
• 4K x 2K 60 Hz - maximum range (Cat. 6/6A/7): 30 m
• IR remote control extender
The Signal HDMI H3644 converter/extender allows for transmission of HDMI signal over longer distances via minimum Cat. 6 twisted pair cable.
• Transmission via a single Cat. 5/5e/6 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
The PS-m DIN distribution frame is designed mainly for fiber optic cable crossing in places with limited space.
• Made of 1 mm steel sheet
• Convenient and quick assembly on DIN rail
• Three holes for cables up to 10 mm in diameter
• Powder painted grey
• Convenient bracket for splicing caps
• Dimensions: 85x70x33 mm for safe arrangement of optical fibers
• Convenient and quick assembly on DIN rail
• Three holes for cables up to 10 mm in diameter
• Powder painted grey
• Convenient bracket for splicing caps
• Dimensions: 85x70x33 mm for safe arrangement of optical fibers
The HDMI Signal cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius.
• Length: 1 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Radial topology
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Multiswitch in radial topology,
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 12 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 12 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Compact multiswitch in radial topology,
• Inputs: 8 from two quatro LNBs, 1 from terrestrial antenna,
• Outputs: 8 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 8 from two quatro LNBs, 1 from terrestrial antenna,
• Outputs: 8 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
SignalHD H3610 repeater allows to use long HDMI cables. The repeater has to be located between two long cables, the first of them (between the source device and the input of the repeater) cannot be longer than 35 meters, and the second (between the repeater output and the destination device) should ...
• HDMI regeneration
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Easy installation.
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Easy installation.
DiSEqC 2.0 switch 2x1 Signal DS-7070 R852511 is used in individual satellite systems distributing signals from two satellites. The switch inputs are connected with two single LNBs, e.g. A9827, the output with the satellite receiver.
• New! DiSEqC 2.0 switch,
• High isolation between inputs and between output and inactive input,
• Ground connector,
• Casing made of ABS resin,
• Easy mounting,
• Two fastening bands.
• High isolation between inputs and between output and inactive input,
• Ground connector,
• Casing made of ABS resin,
• Easy mounting,
• Two fastening bands.
Signal-HD HDMI to IP converter enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units, as well as remote control extender for a Blu-ray/DVD player, STB etc.
• HDMI to IP conversion
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
The Signal-HD HDMI to IP converter enables the user to connect a remote (up to 100 m) source of HD content to an HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units. USB ports in the units also allow for remote control of e.g. a DVR/NVR, by using a...
• HDMI transmission via a single Cat. 5e/6 cable
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Minimized data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
• Minimized data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
Signal ZMZ-13 surge protection installation box R48615 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (13) against voltage surges induced in signal lines by lightning strokes. Intended for mountin...
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing.
• Dedicated to FM and TV systems
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
Signal GSM-305 A6765 repeater amplifies the GSM signal and distributes it inside buildings. The amplification coverage is approx. 300 sqm.
• Operating band 880-915, 925-960 MHz (GSM+EGSM)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
Signal GSM-505 A6775 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network is sufficient to use mobile phones outside buildings, but is inadequate for indoor operation. Such locations include some remote places (long distances to bas...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
Signal PLB-40E E93132 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 45 kg. Due to a special design, the rear of a TV/monitor is only 19 mm from the wall.
• Screen size range: 32'' - 55''
• Load capacity: 45 kg
• Distance from wall: 19 mm
• Mounting interface: VESA (max. 400x200)
• Load capacity: 45 kg
• Distance from wall: 19 mm
• Mounting interface: VESA (max. 400x200)
Signal-HD HDMI 2.0 Switcher 3x1 H3132 enables the user to connect up to three sources of high-definition signals (up to 4K x 2K at 60 Hz) to a modern television or monitor equipped with HDMI input. The amplified output signal can be transmitted via HDMI 2.0 cable over distance up to 15 m. The choic...
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Support for HDCP
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Support for HDCP
• Remote control
The LPA49-466 wall mount has been designed to place a modern and sleek LCD (OLED) TV on a wall.
• TV screen size range: 37"... -90”
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
The HDMI Slim cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius (40 mm).
• Length: 2 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Compact multiswitch in radial topology,
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
The KMA20-221 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The SIGNAL 18 VDC / 1 A R71451 power supply is dedicated for multiswitches from the MRP series. The cable is terminated with F plug.
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The KMA20-223 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits FM/DAB/TV signals into 8 paths
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
Signal Signal LP42-22DT E93113 mount has been designed to place a modern LCD/LED/OLED television/monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range of -10 to +5 degrees.
• Screen size range: 23''... 42''
• Tilt adjustment: -10° ... +5°
• Load capacity: 50 kg
• Distance from wall: 56 mm
• Mounting interface: VESA max 200x200
• Tilt adjustment: -10° ... +5°
• Load capacity: 50 kg
• Distance from wall: 56 mm
• Mounting interface: VESA max 200x200
Signal LP42-44DT E93115 mount has been designed to place a modern LCD/LED/OLED television or monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) between -10 to +5 degrees.
• Screen size range: 32''... 55''
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance of TV's rear to the wall: 56 mm
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance of TV's rear to the wall: 56 mm
Signal LDA18-112N E93361 bracket has been designed to place a modern LCD/LED monitor or small television on a wall. Its load capacity is 15 kg. The wall mount allows easy adjustment of tilt (without additional tools) in the range of -12° to 8° degrees. It is also possible to rotate the panel horizon...
• Screen size range: 13"... 27"
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
Subscriber outlet integrating FM/TV/SAT antenna system with telephone network and LAN, from renowned Signal series of RF equipment (splitters, taps, transmitters, remote control extenders).
• Multifunctional terminal outlet
• FM/TV/SAT/Phone/LAN sockets
• For flush mounting
• Insertion loss below 3 dB
• FM/TV/SAT/Phone/LAN sockets
• For flush mounting
• Insertion loss below 3 dB
Signal R694140 is designed for installations where one coaxial cable feeds terrestrial TV, FM radio, and satellite TV signals (SAT1), and second one provides another independent satellite signal (SAT2). This ensures two independent satellite signals for a dual-tuner PVR receiver (capable of recordin...
• Can provide independent satellite signals to twin PVR receivers
• Can inject modulated RF signal from any local device (SAT receiver, DVD player etc.) into a whole home TV system
• For surface or flush mounting
• Loss in FM/TV band: 3.5 dB
• Loss of SAT1 output: 3.5 dB; SAT2 output: 3 dB
• Can inject modulated RF signal from any local device (SAT receiver, DVD player etc.) into a whole home TV system
• For surface or flush mounting
• Loss in FM/TV band: 3.5 dB
• Loss of SAT1 output: 3.5 dB; SAT2 output: 3 dB
• DVB-T2 standard terrestrial TV reception
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
In bigger installations, the differences of potentials between individual parts of the antenna/cable networks may cause overvoltages and surge currents effecting in sparks when connecting the equipment (and even light electric shocks). It may also be the reason of unexpected damages of the equipment...
• Solves problems caused by potential differences between network segments, network and receivers etc.
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The additional receiver for use with the H3613 set allows sending HDMI signals over an IP network to another monitor/TV (using an Ethernet switch). The receiver has the ability to transmit a USB signal to the sender in order to control the source of the HDMI signal.
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
Signal surge protection box R48606 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects the system against voltage surges induced in signal lines by lightning strokes.
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
Signal ZMZ-12 surge protection installation box R48614 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (12) against voltage surges induced in signal lines by lightning strokes. Intended for mountin...
• Inner/outer box made of PA 11 aluminum alloy, powder coated in RAL 7035
• Cable openings are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable openings are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
Mast mount for sealed boxes 210/230/145 for pole mounting.
• Mounting of sealed boxes to a pole
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
• Splitting SAT TV and TV signals into 3 paths
• Operating band: 5-2400 MHz
• DC pass between outputs and input
• Insertion loss (input-output): 8 dB
• Operating band: 5-2400 MHz
• DC pass between outputs and input
• Insertion loss (input-output): 8 dB
Signal GSM-1205 A6785 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network allows for use of mobile phones out of buildings, but is insufficient for indoor operation. Such locations include some remote places (long distances to base...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
Signal LP42-44ST E93125 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -10 to 0 degrees.
• Screen size range: 32''... 55''
• Tilt adjustment: -10° ... 0°
• Load capacity: 50 kg
• Distance from wall: 46 mm
• Tilt adjustment: -10° ... 0°
• Load capacity: 50 kg
• Distance from wall: 46 mm
The LP59-46T wall mount has been designed to place a modern and sleek LCD (OLED) TV on a wall.
• TV screen size range: 37"... 80”
• Tilt adjustment: -10o ... +5o
• Load capacity: 70 kg
• Distance from wall: 49 mm
• Mounting interface VESA: 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400
• Tilt adjustment: -10o ... +5o
• Load capacity: 70 kg
• Distance from wall: 49 mm
• Mounting interface VESA: 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400
Signal ZPZ-12 surge protection installation box R48612 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (12) against voltage surges induced in signal lines by lightning strokes.
The Signal GDW-505 repeater amplifies GSM/3G/LTE signals inside buildings. The indoor coverage area is up to 500 sqm
• Operating band: GSM, LTE, DCS, 3G
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
Signal surge protector - an ideal device for everyone who cares for their TV and satellite equipment: multiswitch, satellite receiver, television, stereo - the best precautionary measure against thunderstorms that can happen not only in the summer, but also in the fall and springtime. The device ca...
• Lightning protection of TV and SAT TV devices
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The combo meter ST-6986 measures DVB-S/DVB-S2 (HD) satellite signal, DVB-T/T2 (HD) terrestrial TV signal in HEVC 10 Bit compression and DVB-C cable signal.
• Measures DVB-T/T2/C and DVB-S/S2 signals
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
• Splitting signals into 4 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 10 dB
• Splitting signals into 6 paths
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
• Operating band: 5 - 2400 MHz
• DC pass between outputs and input
• Signal loss (IN/OUT): 12 dB
Signal T2-BOX receiver receives free DVB-T2 digital terrestrial TV channels broadcast in HEVC (H.265/MPEG-H) and H.264/MPEG-4 video coding technology with Dolby E-AC-3 audio.
• Fulfills the requirements of the Regulation of the Ministry of Digitization
• Reception of terrestrial TV in DVB-T2 standard
• Support of HEVC encoding (H.265 /MPEG-H)
• Reception of audio in MPEG-2 and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function - turning on the receiver starts the TV and vice versa
• Program list copying
• Universal learning remote control
• Semi-Twin Tuner - it is possible to record one channel and watch another channel at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of HD channels
• Programmable timers
• Support for teletext and on-screen subtitles
• Logical Channel Number (LCN) support
• Possible to manually change the order of programs and their numbering
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB-T2 head unit.
• Low heat emission
• Reception of terrestrial TV in DVB-T2 standard
• Support of HEVC encoding (H.265 /MPEG-H)
• Reception of audio in MPEG-2 and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function - turning on the receiver starts the TV and vice versa
• Program list copying
• Universal learning remote control
• Semi-Twin Tuner - it is possible to record one channel and watch another channel at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of HD channels
• Programmable timers
• Support for teletext and on-screen subtitles
• Logical Channel Number (LCN) support
• Possible to manually change the order of programs and their numbering
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB-T2 head unit.
• Low heat emission
The KMA20-220 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The Signal LTE700 filter (R49601) is used for TV/SAT systems and can filter unwanted signals in the 700 MHz band.
• Attenuation of LTE700 signals (band > 694 MHz).
• Very steep slope of attenuation curve on the band boundary
• Very steep slope of attenuation curve on the band boundary
The Signal LP42-46DT E93117 mount has been designed to place a modern LCD/LED television or monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range of -10 to +5 degrees.
• Screen size range: 37"...70''
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance from wall (to the TV's back): 56 mm
• Mounting interface: max. VESA 600x400
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance from wall (to the TV's back): 56 mm
• Mounting interface: max. VESA 600x400
Signal LPA36-443A E93163 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range from -20 to 10 degrees. It is also possible to rotate the panel horizontally (+...
• New! Universal LCD/LED/OLED wall mount
• Screen size range (diagonal): 32'' - 55''
• Tilt adjustment: -20°... +10°
• Horizontal rotation range: -90°... +90°
• Leveling: -3°... +3°
• Load capacity: 50 kg
• Distance from wall: 62 - 475 mm
• Mounting interface: VESA (200x200, 400x200, 300x300, 400x400)
• Screen size range (diagonal): 32'' - 55''
• Tilt adjustment: -20°... +10°
• Horizontal rotation range: -90°... +90°
• Leveling: -3°... +3°
• Load capacity: 50 kg
• Distance from wall: 62 - 475 mm
• Mounting interface: VESA (200x200, 400x200, 300x300, 400x400)
The TV/SAT wall outlets R694100 are mainly used in multiswitch systems, as the terminal outlets for subscribers' receivers. They are suitable for systems where all signals (FM, TV, SAT TV) are provided by one coaxial cable. The built-in filters separate the satellite and terrestrial (FM and TV) sign...
• Popular outlet used in installations based on multiswitches,
• 3 signal outputs: FM radio, terrestrial TV, satellite TV,
• Suitable for flush or surface mounting,
• Easy installation,
• Max. insertion loss 3.5 dB.
• 3 signal outputs: FM radio, terrestrial TV, satellite TV,
• Suitable for flush or surface mounting,
• Easy installation,
• Max. insertion loss 3.5 dB.
The subscriber terminal outlet Signal RTV R694130 has been designed for use in individual and shared antenna systems distributing terrestrial DVB-T, DAB and FM signals.
• Affordable high quality TV and FM outlet
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
