EN
PL
CZ
DE
IE
HU
PT
RO
SK
The ORF202 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
• Acceptable power level at optical input -15...-5 dBm
• Open casing guaranteeing high level of shielding - class A
• OLC - automatic control to stabilise signal level
• LEDs on the casing greatly facilitating proper configuration of the whole system
• DC power supply is provided directly from the connected multiswitch or from an external DC 10...20 V power supply, which is not standard equipment
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
The ORF302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The OTM302T optical transmitter is used to create fiber optic RF/SAT systems and the implementation of transmissions at a wavelength of 1310 nm.
• FP laser
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
The ORL302F E optical receiver enables the conversion of optical signals into Legacy, Wideband and Radio/DVB-T2 electrical signals.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
The AS038R65 amplifier (1-in/4-out) is designed for cable TV installations providing services also in the return channel band (Internet).
• For use in CATV and DVB-T antenna systems
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
• Return channel connectivity (Internet)
• Passive return channel is compatible with any CATV network
• Maximum output level of 100 dBμV
• Built-in 4-way splitter
• Max gain of 23 dB, with adjustment range of 16 dB
• Low power consumption (below 3 W)
MR912 9 in/12 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• 9/12 multiswitch for radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
MR924 9 in/24 out multiswitch with power supply and active/passive terrestrial TV path dedicated for small and medium installations with distribution of RTV/SAT signals.
• High-performance radial multiswitch for 24-slot installation
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Passive TV signal path (5-862 MHz)
• Built-in power supply
• Open casing guaranteeing high level of shielding - class A
• Built-in cable pre-correction
• Grouping of outputs according to output level
• Separation between inputs greater than 30 dB
• Preamplifier feed for terrestrial antenna
• Active terrestrial signal path equipped with LTE filter (47-790 MHz)
• Passive TV signal path (5-862 MHz)
• Built-in power supply
• Open casing guaranteeing high level of shielding - class A
