EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The tap distributes amplified GSM/DSC/UMTS/LTE signals to indoor antennas A741001, A741002. Operating band: 800...2500 MHz; connectors: N-f.
• Breakthrough attenuation <1 dB
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
• Branch attenuation 12 dB
• Isolation between outputs >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1.4
• Connectors: N-sockets
The eight-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 670 - 3800 MHz band.
• Number of outputs: 8
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
• Bandwidth 670-3800 MHz
• Attenuation: 12 dB
• Connectors: N-sockets
The antenna is used for receiving and transmitting signals in the 800-2170 MHz band. It has a gain of 9 dBi and is equipped with a 10 m cable terminated with an SMA connector.
• Bandwidth 800-2170 MHz
• 9 dBi gain
• VSWR <2
• Impedance 50 ohm
• Directional antenna
• Cable 10 m
• SMA connector
• 9 dBi gain
• VSWR <2
• Impedance 50 ohm
• Directional antenna
• Cable 10 m
• SMA connector
The antenna is used for receiving and transmitting signals in the 800-2170 MHz band. It has a gain of 9 dBi and is equipped with a 10 m cable terminated with an FME connector.
• Bandwidth 800-2170 MHz
• 9 dBi gain
• VSWR <2
• Impedance 50 ohm
• Directional antenna
• Cable 10 m
• FME connector
• 9 dBi gain
• VSWR <2
• Impedance 50 ohm
• Directional antenna
• Cable 10 m
• FME connector
An antenna for receiving and transmitting signals in the 806-2700 MHz band. It has a gain of 8 dBi and is equipped with a 12 cm cable terminated with an N connector.
• Band 806-2700 MHz
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• MIMO directional antenna
• 12 cm cable
• N connectors
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• MIMO directional antenna
• 12 cm cable
• N connectors
The four-way GSM splitter is used to distribute the amplified signal to the indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 4
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
The two-way GSM splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the frequencies 800-2500 MHz.
• Number of outputs: 2
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• 3.5 dB attenuation
• Connectors: N-sockets
The GSM three-way splitter is used to distribute the amplified signal to indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 3
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assumption 5.5 dB
• Connectors: N-sockets
Omnidirectional antenna for receiving and transmitting signals in the 890-1990 MHz band. It has a gain of 5 dBi and is equipped with a 2.8 m cable terminated with an FME connector.
• Bandwidth 890-1990 MHz
• 5 dBi gain
• VSWR <2
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 2.8 m
• FME connector
• 5 dBi gain
• VSWR <2
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 2.8 m
• FME connector
NB-IoT / CAT-M /LTE cat.1 / GSM signal meter for installation, measurement and optimisation of IoT networks.
• Measurement and visualisation of signal quality and strength NB-IoT, CAT-M, LTE cat.1, GSM
• Antenna connectors (2xSMA)
• Two SIM card slots
• Antenna connectors (2xSMA)
• Two SIM card slots
