Signal HD's HDMI 1x8 splitter allows HDMI signals to be distributed to up to eight TV sets simultaneously.
• Signal distribution to up to 8 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
Signal HD's 3x1 Maki HDMI switch enables 3 high definition (HD) devices to be connected to a TV set equipped with an HDMI connector.
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
Signal HD's HDMI 1x2 splitter allows HDMI signals to be distributed to two TV sets simultaneously.
• Signal distribution to 2 TVs
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD audio compression
Signal WS-6990 modulator allows you to convert the signal from a single RCA/HDMI source to the DVB-T/C standard.
• Digital single-channel DVB-T/C modulator
• Adjustable bitrate from 1...20 Mbps or Auto function
• Can connect one HDMI source and modulate it to a DVB-T or DVB-C or ISDB-T multiplex
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Adjustable bitrate from 1...20 Mbps or Auto function
• Can connect one HDMI source and modulate it to a DVB-T or DVB-C or ISDB-T multiplex
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
The HDMI socket to HDMI plug adapter enables the cable to be easily connected to the connector on the receiver at a 90-degree angle.
• Possibility to change the angle (90º) between input and outlet
• Ideal for connecting devices in hard-to-reach places
• Ideal for connecting devices in hard-to-reach places
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• 7 m length
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
The HDMI female to HDMI female adapter (gender changer) allows to connect two typical HDMI cables.
• For connecting two HDMI cables
• High quality
• High quality
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• 10 m length
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
Cable designed to connect HD satellite receivers, games consoles and computers to televisions. The cable transmits both video and audio.
• Length 5 m
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• Supports HDMI 2.0 standard - 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
The HDMI plug to HDMI socket adapter is used to connect the signal cable to the HDMI receiver (transmitter).
• Possibility to change the angle (180º) between inlet and outlet
• Ideal for connecting devices in hard-to-reach places
• Ideal for connecting devices in hard-to-reach places
The Signal Repeater makes it possible to create long connections via HDMI cable. The devices must be installed between the long cables.
• HDMI regeneration
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Quick and easy installation
The HDMI Signal cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius.
• Length: 1 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
The cable is designed to connect HD satellite receivers, game consoles and computers to TVs. The cable transmits both video and sound.
• Length: 30 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 50 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 70 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10
• AUDIO return channel
• Ethernet channel
• High flexibility
GMH-1NT single socket equipped with an HDMI connector meeting standard 1.4.
• Surface-mounted HDMI socket
• Housing made of high quality plastic
• Colour: white
• HDMI 1.4 standard
• Possibility to mount the socket on a double or triple frame
• Housing made of high quality plastic
• Colour: white
• HDMI 1.4 standard
• Possibility to mount the socket on a double or triple frame
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
• Minimised data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
The converter allows for transmission of HDMI signal over longer distances via minimum cat. 6 twisted pair cable. A USB control extension is provided.
• Transmission via a single cat 6 cable
• Video mode 1080p
• Range over CAT 6 cable up to 70 m
• USB extender
• Video mode 1080p
• Range over CAT 6 cable up to 70 m
• USB extender
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. IR extender.
• Transmission via a single Cat 5e/6 cable
• Low data load on the network
• UDP/IP transmission (multicast)
• Point-to-multipoint connections possible
• 1080p picture mode
• IR remote control extender
• Maximum cable length 100 m
• Low data load on the network
• UDP/IP transmission (multicast)
• Point-to-multipoint connections possible
• 1080p picture mode
• IR remote control extender
• Maximum cable length 100 m
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. USB extender.
• HDMI transmission over a single CAT 5e/6 cable
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
The HDMI Slim cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius (40 mm).
• Length: 2 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
The converter enables HDMI (4K) signals to be transmitted using CAT5 or higher twisted-pair cables. The device is equipped with an IR extender.
• Transmission via a single Cat. 6/6A/7 cable
• Data transmission rate of up to 18 Gbps
• 4K x 2K 60 Hz picture mode
• Range over CAT 6/6A/7 up to 60 m - 4K x 2K 30 Hz
• Range over twisted pair cable 6/6A/7 up to 30 m - 4K x 2K 60 Hz
• IR remote control extender
• Data transmission rate of up to 18 Gbps
• 4K x 2K 60 Hz picture mode
• Range over CAT 6/6A/7 up to 60 m - 4K x 2K 30 Hz
• Range over twisted pair cable 6/6A/7 up to 30 m - 4K x 2K 60 Hz
• IR remote control extender
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables a high-definition (HD) signal to be connected to a receiver (TV, monitor) via an IP network. USB extender.
• HDMI transmission via one cat 5e/6 cable
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
• USB extender - DVR control capability
• UDP/IP transmission
• 1080p video mode
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The converter enables HDMI signals to be transmitted using CAT 6 or higher twisted-pair cables. The device is equipped with an IR extender.
• HDMI transmission over a single Cat. 6/6A/7 cable
• Up to 10.2 Gbps data transmission
• 1080p picture mode
• Range over CAT 6/6A/7 twisted pair cable up to 70 m
• IR remote control extender
• Up to 10.2 Gbps data transmission
• 1080p picture mode
• Range over CAT 6/6A/7 twisted pair cable up to 70 m
• IR remote control extender
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The Keystone HDMI connector allows two plug-ended HDMI cables to be connected together.
• Connector type: HDMI
The HDMI 1x4 splitter makes it possible to distribute the HDMI signal to four TV sets at the same time. In addition, the device supports EDID functions.
• Signal distribution to 4 TVs
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
• EDID function
• Supports HDMI 2.0 standard
• Supports 4Kx2K 60 Hz resolution
• Supports DTS Digital, Dolby Digital, DTS-HD, Dolby True HD audio compression
The Signal H3644 HDMI converter enables HDMI signals to be transmitted over long distances using Category 6 or higher twisted-pair cables.
• Transmission via a single Cat. 5/5e/6 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60 Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
The HDMI fiber optic converter allows for connection of HD signal to a receiver (TV, monitor) via optical network. IR extender.
• Transmission of HDMI signal via one single-mode fiber
• Max. range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
• Max. range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI v1.4 cable
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable v1.4
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 20 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 20 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• 7m HDMI flat cable
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• 10m HDMI flat cable
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD image transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• HDMI v1.4 standard
• Image transmission at a maximum resolution of 4096x2160
• FullHD image transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Length: 0.5 m
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable 1.4 standard compatible
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 5 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 5 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 10 m
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• High quality HDMI cable with v1.4 standard
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 15 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
• Transmits video at a maximum resolution of 4096x2160
• Fitted with anti-interference filters
• Length of 15 m
• FullHD video transmission
• Vibrant and natural colors through the use of Deep Color function - image transmission in 48 bit
• 3D image transmission
• Reverse audio channel
• Ethernet channel
The SIGNAL-4K modulator is a professional device that enables the conversion of an HDMI signal in 4K Ultra HD/Full HD resolution to a DVB-T2 digital terrestrial television signal.
• Supports HDMI input up to 4K UHD 2160p
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
• H.264 or H.265 (HEVC) compression
• RF output in DVB-T2/T/C standard in 4K UHD 2160p resolution
• Programmable channel number and LCN
• Configurable PID, NIT, SID
• Easy installation, intuitive configuration via RJ-45 port (web browser) or buttons located on the front casing
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• The device is an excellent alternative to installations based on splitters and HDMI cables
Cable with a lenght of 2m for audio/video transmission between DisplayPort and HDMI devices.
• Length: 2 m
• Connectors: DisplayPort - HDMI
• Connectors: DisplayPort - HDMI
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Flat cable, length of 2 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Flat cable, length of 3 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Flat cable, length of 5 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Single-channel digital HDMI - DVB-T modulator dedicated to small systems.
• Digital HDMI-DVB-T modulator
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60 Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
• Dedicated to small systems
• Distribution of A/V signal in coaxial cable
• High-quality digital signal of Full HD standard (1080P/60 Hz)
• Excellent alternative for splitters and dozens of HDMI cables
• Easy system, intuitive setup
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 2 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Cable designed to connect HD satellite receivers, game consoles and computers to TV sets. The cable transmits both video and audio.
• Length: 3 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The ST-7990 4×HDMI modulator – 4×COFDM (DVB-T)/4×QAM (DVB-C) enables the conversion of signals from four HDMI sources to 4 DVB-T/C MUX-es.
• Digital four-channel DVB-T/C modulator
• Capable of connecting four HDMI signal sources and modulating them into four digital DVB-T/C multiplexes
• Proven HDMI-DVB-T/C modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Capable of connecting four HDMI signal sources and modulating them into four digital DVB-T/C multiplexes
• Proven HDMI-DVB-T/C modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 0.5 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 1 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
Modulator Signal-420 HDMI – 1×COFDM (DVB-T) enables the conversion of signals from one HDMI source to the DVB-T standard.
• Proven HDMI-DVB-T modulator in many installations
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Simple installation, intuitive configuration
• Configurable parameters such as LCN, SID, PID, NIT
Modulator ST-7992 2×HDMI – 2×COFDM (DVB-T)/ 2×QAM(DVB-C) enables the conversion of signals from two HDMI sources to 2 DVB-T/C MUX-es.
• Digital dual channel DVB-T/C modulator
• Capable of connecting two HDMI signal sources and modulating them into two digital DVB-T/C multiplexes
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
• Capable of connecting two HDMI signal sources and modulating them into two digital DVB-T/C multiplexes
• Proven in many installations HDMI-DVB-T/C modulator
• Converts signal from any HDMI source
• High quality digital signal in HD/SD standard
• Ideal for collective TV installations, hotels, RTV shops, galleries, pubs, etc.
• Easy installation, intuitive configuration
The WS-8901U modulator enables conversion of audio/video signal fed to HDMI/CVBS to DVB-T COFDM standard. Mounting in a 19" rack.
• Single channel DVB-T modulator for RACK rack
• H.264 codec compression and maximum bitrate of 20 Mbit/s
• Conversion of signal from any HDMI source
• High quality digital signal of HD standard
• Ideal for SMATV systems, hotels, TV stores, galleries, pubs, etc.
• Easy installation, intuitive configuration.
• H.264 codec compression and maximum bitrate of 20 Mbit/s
• Conversion of signal from any HDMI source
• High quality digital signal of HD standard
• Ideal for SMATV systems, hotels, TV stores, galleries, pubs, etc.
• Easy installation, intuitive configuration.
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. IR extender.
• Transmission via a single cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
Universal monitor suitable for use 12/ 7 in surveillance systems. IPS screen with 1920 × 1080 resolution with E-LED backlight.
• Monitor for 24/7 operation
• Wide viewing angle vertically and horizontally
• Elegant design - frameless housing
• Wide viewing angle vertically and horizontally
• Elegant design - frameless housing
The Hikvision DS-D5043UC monitor is designed for 24/7 operation in CCTV surveillance systems.
• Screen diagonal: 42.5"
• D-LED backlight technology with 4k (3840 × 2160) resolution.
• Viewing angles: horizontal: 178°
• Working time: 24/7
• Response time: 8 ms
• Interfaces: 2 × HDMI 2.0, 1 × VGA, 1 × LAN, 1 × RS232, 1 × audio input, 1 × audio output, 1 × USB3.0, 1 × USB 2.0
• Built in speaker: 2 × 8 W
• Selectable signal source
• Contrast: 1200:1
• Brightness: 400 cd/m²
• Mounting on the wall in VESA 200 or VESA 400 standard
• D-LED backlight technology with 4k (3840 × 2160) resolution.
• Viewing angles: horizontal: 178°
• Working time: 24/7
• Response time: 8 ms
• Interfaces: 2 × HDMI 2.0, 1 × VGA, 1 × LAN, 1 × RS232, 1 × audio input, 1 × audio output, 1 × USB3.0, 1 × USB 2.0
• Built in speaker: 2 × 8 W
• Selectable signal source
• Contrast: 1200:1
• Brightness: 400 cd/m²
• Mounting on the wall in VESA 200 or VESA 400 standard
The DS-D5024F2-BV2S is a Hikvision-branded monitor designed for use in 24/7 continuous CCTV monitoring systems.
• Screen type: VA with E-LED backlight
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 23.8"
• Response time: 7 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built in speaker
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 23.8"
• Response time: 7 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built in speaker
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
The DS-D5022F2-1V2S is a Hikvision-branded monitor designed for use in 24/7 continuous CCTV monitoring systems.
• Screen type: VA with E-LED backlight
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 21.45"
• Response time: 8 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built-in 2 speakers (4 W)
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
• Resolution: Full HD (1920 x 1080)
• Low blue light technology
• Screen diagonal: 21.45"
• Response time: 8 ms
• Contrast: 4000:1
• Brightness: 250 cd/m²
• Viewing angles (horizontal/vertical): 178°/178°
• Inputs: 1 x HDMI, 1 x VGA
• Audio input
• Built-in 2 speakers (4 W)
• Very sleek housing including frame
• Mounting: stand or VESA standard (75 x 75 mm)
4-channel multi-system DVR for cameras up to 2 MP with storage on built-in eSSD.
• Supports 4 HD-TVI, HD-CVI, AHD cameras in 1080p, 720p at 15 fps or CVBS
• Motion detection 2.0 on 2 channels
• Support for 1 IP camera
• Built-in 512 GB eSSD
• Motion detection 2.0 on 2 channels
• Support for 1 IP camera
• Built-in 512 GB eSSD
Network recorder from the Eko series with support for AI camera functions, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 40 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 40 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Network recorder from the Eko series with support for AI camera functions, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 56 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 56 Mbps
• Supports up to 4 Sunell or other manufacturers' IP cameras via Onvif
• 1 slot for SATA drive up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 100 Mbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Network recorder from the Eko series with support for AI camera functions, compact metal housing.
• Recording in resolution up to 4K (12 MP)
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 112 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
• Simultaneous HDMI (4K/30 Hz, 1080p/30/60 Hz)/VGA (1080p/60 Hz) outputs
• Maximum input bandwidth 112 Mbps
• Supports up to16 Sunell or other manufacturers' IP cameras via Onvif
• 2 slots for SATA drives up to 8 TB
• H.265 compression (Smart)/H.264
• Intelligent motion detection (4 channels)
• Support for intelligent camera functions
• 2 Ethernet 1 Gbps ports
• Audio I/O for two-way communication
• Access via P2P cloud
• Alarm I/O
Universal tool to facilitate the implementation, configuration and maintenance of CCTV systems and computer networks.
• Scratch-resistant 7" IPS touchscreen display with high brightness for operation even in sunlight
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
• Large 51 Wh battery (7.4 V, 7000 mAh) for approx. 8 -10 h operation
• Smooth operation of various surveillance systems: IP, HD-CVI, AHD, HD-TVI and CVBS
• RS-485 port for PTZ camera control (Pelco-P, Pelco-D and more than 30 other protocols)
• Function of quick search and connection with IP cameras (automatic subnet matching, ability to configure camera parameters)
• Possibility to simultaneously display images from up to 32 cameras
• Possibility to perform digital zoom (8x) of images from cameras
• Possibility to record video and snapshots of images from cameras on built-in memory
• HDMI signal input and output – possibility to display images from the NVR and connect an external monitor
• Wi-Fi support (2, 4 GHz)
• Physical function buttons
• Test of video, audio, data, network, Wi-Fi, PoE signals
• TDR reflectometer (location of UTP cable break location)
• Tester of UTP cables
• Built-in internal memory: 8 GB, microSD card support up to 128 GB
• Built-in flashlight
• Power output: 2 × DC 12 V/2 A, DC 24 V/2A, PoE (802.3af/at), DC 5 V/2 A
Hikvision DS-9664NI-M8 is a modern 64-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 8 SATA III drives up to 16 TB (128 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for a PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via P2P cloud
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 8 SATA III drives up to 16 TB (128 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for a PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via P2P cloud
The Hikvision DS-9632NI-I8 is a state-of-the-art 32-channel IP NVR that allows recording video from IP cameras of up to 32 MP resolution.
• Recording at up to 32 MP
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Maximum input / output bandwidth – 320/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per drive)
• Support for 8 SATA III drives up to 16 TB
• Disk cloning support for eSATA drive
• Support for cameras with built-in VCA analytics
• Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Maximum input / output bandwidth – 320/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per drive)
• Support for 8 SATA III drives up to 16 TB
• Disk cloning support for eSATA drive
• Support for cameras with built-in VCA analytics
• Support for cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
Hikvision DS-7732NI-M4 is a modern 32-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 320/400 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
• Supports up to 32 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 320/400 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
Hikvision DS-9664NI-M16 is a modern 64-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 16 SATA III drives up to 16 TB (256 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
• Supports up to 64 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 2 x VGA
• Independent outputs HDMI1/HDMI2, VGA1/VGA2 (parallel HDMI1/VGA1 and HDMI2/VGA2)
• BNC output,
• Maximum input/output bandwidth – 400/400 Mbps
• Support for RAID 0/1/5/6/10 (min. 4 TB per disk)
• Supports 16 SATA III drives up to 16 TB (256 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+) compression
• Function support: ANR, POS (cash register integration), HotSwap, HotSpare (N+M)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 2 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Andriod, iOS)
• Access via cloud P2P
Hikvision DS-7732NI-M4 is a modern 32-channel IP recorder, recording image from IP cameras with a resolution of 32 MP.
• Recording at up to 32 MP
• Supports up to 16 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 256/256 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
• Supports up to 16 IP cameras from Hikvision or other manufacturers via Onvif
• Video outputs: 2 x HDMI, 1 x VGA
• Independent HDMI 2/VGA outputs
• BNC output
• Maximum input/output data stream – 256/256 Mbps
• Supports 4 SATA III drives up to 16 TB (64 TB total), 1 x eSATA
• SATA drive cloning support
• Supports cameras with built-in VCA analytics (virtual line, intrusion detection, etc.), heat maps, people counting, ANPR
• Supports cameras with AcuSense and Motion Detection 2.0 (human/vehicle filter)
• Supported H.265 (+)/H.264 (+)
• Function support: ANR, POS (cash register integration)
• Recording two streams
• Audio I/O for two-way communication
• Alarm I/O: 16/9
• Power outputs: DC 12 V/1 A
• 2 x USB 2.0, 1 x USB 3.0
• 1 x RS-485, 1 x RS-232
• Ethernet ports: 2 x Rj-45 10/100/1000 Mbps
• Application for PC iVMS-4200 and Hik-Central, smartphone Hik-Connect (Android, iOS)
• Access via cloud P2P
8-channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP). Plastic housing.
• Supports 8 HD-TVI, AHD cameras in 1080p, 720p at 15 fps or CVBS
• Supports 2 IP cameras in standard mode, possibility to replace analog channels by IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – interferes with VCA functions): 4 IP channels (12 when analog channels are disabled)
• H.265 and H.265+
• Supports 2 IP cameras in standard mode, possibility to replace analog channels by IP in 1:1 ratio
• Extended IP camera support mode (Enhanced IP – interferes with VCA functions): 4 IP channels (12 when analog channels are disabled)
• H.265 and H.265+
8-channel Hikvision DVR for up to 2 MP cameras with 4 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (8 channels) or perimeter protection (4 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
4-channel Hikvision DVR for up to 2 MP cameras with 2 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (4 channels) or perimeter protection (8 channels) or face detection and recognition (2 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
16-channel Hikvision DVR for up to 8 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 8 MP resolution at 8 fps, 5 MP (3K) at 12 fps, 3 at 18 fps, 1080p and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 8 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP - excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense - alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
8-channel Hikvision DVR for up to 2 MP cameras with 8 AcuSense channels. Supports universal channels (HD-TVI AHD, HD-CVI, CVBS and IP).
• HD-TVI signal recording with 2 MP resolution at 15 fps/720 p, and below at 25 fps
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
• Support for HD-TVI, AHD or CVBS and 2 IP cameras (max. 6 MP, Hikvision brand or others via Onvif)
• Possibility to replace analog channels with IP in 1:1 ratio
• Extended IP camera mode (Enhanced IP – excludes VCA analysis)
• AI functions: motion detection 2.0 (16 channels) or perimeter protection (8 channels) or face detection and recognition (4 channels)
• AcuSense – alarm filtering with human/vehicle classification
• H.265+/H.265/H.264+/H.264 encoding
• HikConnect cloud support
ARIVA T40 tuner with programmable remote control included and full support for DVB-T2 HEVC/H.265 with Dolby E-AC-3 audio.
• DVB-T2 HEVC/H.265 terrestrial TV reception with Dolby E-AC-3 audio
• HDMI CEC support
• Programmable remote control (selected buttons)
• High-quality metal casing
• Smart Apps (YouTube and others - internet access and appropriate software version required)
• Reception of high-definition channels (High Definition)
• PAL signal upscaling to 720p or 1080p resolution
• EPG support (electronic programme guide)
• PVR and Timeshift support
• Support for programmable timers
• Teletext and subtitle support
• Supports MPEG-2, MPEG-4, MPEG-4 AVC/H.264, HEVC/H.265 standards
• HDMI CEC support
• Programmable remote control (selected buttons)
• High-quality metal casing
• Smart Apps (YouTube and others - internet access and appropriate software version required)
• Reception of high-definition channels (High Definition)
• PAL signal upscaling to 720p or 1080p resolution
• EPG support (electronic programme guide)
• PVR and Timeshift support
• Support for programmable timers
• Teletext and subtitle support
• Supports MPEG-2, MPEG-4, MPEG-4 AVC/H.264, HEVC/H.265 standards
The VSA N5 WiFi 4K H.265/HEVC IPTV Digital Receiver enables reception of TV signals on IP-based broadband networks broadcast in MPEG-2, H.264 and H.265/HEVC technologies, both in high definition 4K UHD with HDR.
• Receiver dedicated for IPTV systems
• Resolution: 4K/p60 HDR
• HDMI CEC function support
• PAL upscaling to 720p, 1080i, 1080p
• Functional and clear Electronic Program Guide (EPG)
• Separate lists of favorite, TV, and radio channels
• Recording option, access to selected web services (YouTube etc.)
• Support for teletext and subtitles
• Support for MPEG-2 and MPEG-4 AVC/H.264
• Built-in multimedia player (including HD movies, music, pictures)
• Resolution: 4K/p60 HDR
• HDMI CEC function support
• PAL upscaling to 720p, 1080i, 1080p
• Functional and clear Electronic Program Guide (EPG)
• Separate lists of favorite, TV, and radio channels
• Recording option, access to selected web services (YouTube etc.)
• Support for teletext and subtitles
• Support for MPEG-2 and MPEG-4 AVC/H.264
• Built-in multimedia player (including HD movies, music, pictures)
The Signal T2-MINI receiver receives free-to-air channels broadcast on DVB-T2 digital terrestrial television in HEVC (H.265/MPEG-H) and H.264/MPEG-4 video coding technology with Dolby E-AC-3 audio.
• DVB-T2 standard terrestrial TV reception
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission



