During thunderstorms electronic devices are very vulnerable to damages. Risk of over-voltage is present even in spots 1.5 km distant from the place where where a lightning bolt strikes.
Code: J2830

AXON AIR NET Protector is designed for surge protection of devices connected to Ethernet 10/100/1000 Mb/s networks via an overhead UTP/FTP cable. AIR NET Protector should be used as the first level of protection when employing overhead transmission cables. The signal circuits are protected by elemen...
Code: J2835

NetProtector 4p PoE protects network devices from voltage surges, which can occur during electrical storms. It protects both the LAN and PoE ports. NetProtector 4p PoE can also be used as a conventional PoE adapter. The supplying voltage from an external power supply (connected to the 2.1/5.5 power ...
Code: J2838

Panel for mounting one AXON PRO protector J2845 (4xPoE+, 4xIN, 4xOUT) in a RACK cabinet.
Code: J2847

AXON ADSL Protector is designed to protect ADSL equipment connected to a telecommunications line. Its job is to limit overvoltages appearing in the line. It protects two wires, carrying excessive charges to the ground. The basic condition for an effective operation of the device is to connect the gr...
Code: J2810

AXON PoE Net Protector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks and utilizing unused pairs of the UTP/FTP cable for power supply. The protector includes two protection circuits - for transmission lines (1-2, 3-6) and the power path (lines 4, 5, 7, 8). Th...
Code: J2836

AXON PoE Multi NetProtector is designed for surge protection of devices connected to Ethernet 10/100 Mb/s networks, such as network interface cards, hubs, switches, routers etc.
• Protection of LAN segment, including PoE solutions
• Protection of IP CCTV equipment
• Protection for all four paths (pairs)
• Threshold voltages adjusted to the function of a pair (data transmission or PoE)
• For 10/100 Mbps Ethernet networks
Code: J2837

A set of active converters for Ethernet and PoE transmission over coaxial cable, 1 channel 100 Mbps, PoE IN 802.3at/af or Passive (xCOAX3-SW), PoE OUT Passive up to 500 m.
• Transmission range over coaxial cable up to 500 m at 100 Mbps
• Noise immunity and watchdog function in COAX path
• Power supply from switch PoE 802.3at/af or PoE PASSIVE
• Power supply to receiver PoE 802. 3at/af or PoE PASSIVE receivers
up to 30 W total power in the whole power path
• Very low power consumption – 1,35 W for the entire path
• Compact modules
• Clear, optical indication of power and data transmission status
• Easy and quick startup without configuration of parameters
Code: J2840

AXON PRO Video IP Protector is four-channel surge protector of IP CCTV systems using Ethernet 10/100/1000 Mbps networks and PoE+ technology of remote power supply. The PoE+ technology allows for supplying power to devices with higher energy consumption, such as HD cameras.
• Socket type: RJ45
• Number of paths: 4
• Protected cable wires: 1,2,3,4,5,6,7,8
• Dimensions: 167x50x32 mm
• Pass-through for PoE supply
Code: J2845
Temporarily unavailable

Panel for mounting two AXON PRO protectors J2845 (4xPoE+, 4xIN, 4xOUT) in a RACK cabinet.
Code: J2848
Temporarily unavailable