English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
Signal GSM-1205 A6785 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network allows for use of mobile phones out of buildings, but is insufficient for indoor operation. Such locations include some remote places (long distances to base...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
Signal GSM-305 A6765 repeater amplifies the GSM signal and distributes it inside buildings. The amplification coverage is approx. 300 sqm.
• Operating band 880-915, 925-960 MHz (GSM+EGSM)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
Signal GSM-505 A6775 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network is sufficient to use mobile phones outside buildings, but is inadequate for indoor operation. Such locations include some remote places (long distances to bas...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
SignalHD H3610 repeater allows to use long HDMI cables. The repeater has to be located between two long cables, the first of them (between the source device and the input of the repeater) cannot be longer than 35 meters, and the second (between the repeater output and the destination device) should ...
• HDMI regeneration
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Easy installation.
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Easy installation.
The Signal GDW-505 repeater amplifies GSM/3G/LTE signals inside buildings. The indoor coverage area is up to 500 sqm
• Operating band: GSM, LTE, DCS, 3G
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
N-male to N-male Cable (5m RF-5)
• Connector length: 5 m
The tap distributes amplified GSM/DSC/UMTS/LTE signals to indoor antennas A741001, A741002. Operating band: 800...2500 MHz; connectors: N-f.
The tap distributes amplified GSM/DSC/UMTS/LTE signals to indoor antennas A741001, A741002. Operating band: 800...2500 MHz; connectors: N-f.
The tap distributes amplified GSM/DSC/UMTS/LTE signals to indoor antennas A741001, A741002. Operating band: 800...2500 MHz; connectors: N-f.
Wireless range extender Mercusys MW300RE is designed to increase the range and signal strength of existing wireless networks to eliminate dead zones.
Two-way GSM splitter for distributing amplified GSM signal between indoor GSM antennas A741001, A741002. The splitter can operate within 800-2500 MHz range. It is equipped with N-female connectors.
• Splitting the amplified GSM signal into two paths
• For connecting two indoor antennas
• There are versions with 3 and 4 ouputs
• For connecting two indoor antennas
• There are versions with 3 and 4 ouputs
Three-way GSM splitter for distributing amplified GSM signal among three indoor GSM antennas A741001. The splitter can operate between 800 and 2500 MHz. It is equipped with N-female connectors.
The xPoE-4-11A-HS has been designed as LAN extender (repeater) and PoE power supply.
• Compact device size
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100Mbps switch)
• Up to 40W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5W)
• Powered from another PoE switch in 802.3at, 802.3af or Passive (PoE IN port)
• Possibility to power up to 3 PoE receivers 802. 3 PoE 802. 3at/af or PASSIVE receivers (PoE OUT ports)
• Power can be turned off on selected PoE ports
• Improves and distributes network signal (fully functional 100Mbps switch)
• Up to 40W total power for all ports
• Electronic fuse on PoE IN input Electronic fuse on PoE IN input
• Cascade power supply (one xPoE powers another)
• Easy and fast startup without configuring parameters
• Selectable PoE standard (at/af)
• Sequential start of PoE outputs
• Very low power consumption (<0.5W)
