Signal GSM-305 A6765 repeater amplifies the GSM signal and distributes it inside buildings. The amplification coverage is approx. 300 sqm.
• Operating band 880-915, 925-960 MHz (GSM+EGSM)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
• Gain: 60/60 dB
• Max. output power: 10 dBm
• Indoor coverage area up to 300 square meters
• AGC (ALC) - automatic gain/level control
• MGC - manual gain control
• Compliance with ETSI 303 609-4
• Easy installation (Plug and Play)
Signal GSM-505 A6775 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network is sufficient to use mobile phones outside buildings, but is inadequate for indoor operation. Such locations include some remote places (long distances to bas...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 500 square meters
• Automatic level control (AGC, ALC)
• MGC - manual gain control (attenuator)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
Signal GSM-1205 A6785 repeater amplifies GSM signals inside buildings. The device is ideal for locations where the range of a cellular network allows for use of mobile phones out of buildings, but is insufficient for indoor operation. Such locations include some remote places (long distances to base...
• Amplification and distribution of GSM+EGSM signals in buildings/rooms
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
• Indoor coverage area up to 1200 square meters
• Automatic level control (AGC, ALC)
• Manual gain control (MGC)
• Compliance with ETSI 303 609-4 - no problems with out-of-band interference
• Easy installation (Plug and Play)
The HDMI Signal cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius.
• Length: 1 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
The Signal GDW-505 repeater amplifies GSM/3G/LTE signals inside buildings. The indoor coverage area is up to 500 sqm
• Operating band: GSM, LTE, DCS, 3G
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
• Gain: 60/65 dB
• Max. output power: 15 dBm
• Indoor coverage area up to 500 sqm
• Automatic gain/level control (AGC/ALC)
• Manual gain control (MGC)
• Meets the requirements of ETSI 303 609-4
• Easy installation (Plug and Play)
• Device status display
The KMA20-223 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
Signal-HD HDMI Switcher 3x1 (H3131) enables the user to connect up to three sources of high-definition signals to a modern TV set equipped with HDMI input. The amplified output signal can be transmitted via HDMI 1.3b cable over distance up to 15 m. The choice of the device from which the signal is c...
• Enables connection of three devices to one HDMI input
• Input signal selected with remote control
• Support for 12-bit Deep Color
• Maximum resolutions: 1080p, 1920 x 1200
• Input signal selected with remote control
• Support for 12-bit Deep Color
• Maximum resolutions: 1080p, 1920 x 1200
Signal-HD HDMI Splitter 1x8 enables the user to connect up to 8 modern TV sets equipped with HDMI inputs to a source of high-definition signal. The amplified output signals can be transmitted via HDMI 1.4 cables over distances up to 15 m. This product is ideal for demonstration of HD and 4K televisi...
• Easy installation
• HDMI signal distribution to up to 8 monitors/TVs
• Support for HDMI 1.4
• Support for 4K resolution
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Support for 12-bit Deep Color (36 bits for all channels)
• Gilded connectors
• HDMI signal distribution to up to 8 monitors/TVs
• Support for HDMI 1.4
• Support for 4K resolution
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Support for 12-bit Deep Color (36 bits for all channels)
• Gilded connectors
The KMA20-220 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
Signal HD HDMI Splitter 1x4 (4K2K) H3216 enables the user to connect 4 modern televisions/monitors equipped with HDMI inputs to a source of high-definition signal. This splitter can amplify and buffer the signal.
• Easy installation
• HDMI signal distribution to 4 monitors/TVs
• EDID function
• Support for HDMI 2.0
• Support for HDCP 1.4 HDCP 2.2
• Support for 4K x 2K resolution at 60 Hz
• Support for TS Digital, Dolby Digital, DTS-HD, Dolby True HD.
• HDMI signal distribution to 4 monitors/TVs
• EDID function
• Support for HDMI 2.0
• Support for HDCP 1.4 HDCP 2.2
• Support for 4K x 2K resolution at 60 Hz
• Support for TS Digital, Dolby Digital, DTS-HD, Dolby True HD.