English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The RV-1/2P-UHD multiplexer is designed to split signals from two sources without any loss of quality of the signal.
• Signal splitting from 1 to 2 outputs
• Input splitting configuration with jumpers
• Input splitting configuration with jumpers
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
Meter TZU 22 DVB-T Finder is intended for individual Terrestrial antennas.
• Frequency range 47-862 MHz
• Power supply via set top box
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Connector power supply 3,5 mm jack
• PWR RF range 50-80 dBuV
• Power supply via set top box
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Connector power supply 3,5 mm jack
• PWR RF range 50-80 dBuV
The VHD-15 amplifier/repeater is designed to amplify high resolution AHD, HD-CVI or HD-TVI video signal transmitted over a long distance via a twisted-pair (UTP) or coaxial cable.
A single device compensates the attenuation of about 150 m UTP cable or 300-500 m coaxial cable (depending on the type ...
• Standard:AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2A
• USB type A port
• Color: black
• Output current 2A
• USB type A port
• Color: black
The AS07STCA-4K certified signal meter can measure DVB-S/DVB-S2 (4K) satellite signal, DVB-T/T2 (4K) terrestrial TV signal in HEVC 10 Bit compression and C/J.83B/ISDB-T cable signal.
• Measurement of DVB-T/T2/C/J.83B/ISDB-T and DVB-S/S2 signals
• Support for DVB-T2 with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, MER, Link Margin, CBER, VBER
• USB connector (possibility to take a screenshot of current signal measurement, export measurements to .csv file)
• RF signal measurement in the range of 20...100 dBμV
• View of the received channel on the touch screen TFT-LCD display size 7" with high resolution 4K
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Real-time signal spectrum analyzer for detecting interference from LTE signals
• Constellation display
• Large Li-On 7.4 V/7000 mAh battery – enough for about 3-4 h of continuous operation
• Efficient and easy-to-use user interface.
• Support for DVB-T2 with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, MER, Link Margin, CBER, VBER
• USB connector (possibility to take a screenshot of current signal measurement, export measurements to .csv file)
• RF signal measurement in the range of 20...100 dBμV
• View of the received channel on the touch screen TFT-LCD display size 7" with high resolution 4K
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Real-time signal spectrum analyzer for detecting interference from LTE signals
• Constellation display
• Large Li-On 7.4 V/7000 mAh battery – enough for about 3-4 h of continuous operation
• Efficient and easy-to-use user interface.
Sendun SD-9 fiber optic splicer is designed to connect optical fibers. It uses core positioning technology with auto focus.
• 6 motors responsible for positioning the fibers
• 4-core processor for fast operation
• Positioning to the core or to the fiber cladding
• Ability to work in Auto mode or one of 41 presets
• Built-in optical power meter and VFL visual fault locator
• Image magnification x380
• The speed of the motors
• Min. splicing time 5 seconds
• Min. splicing time for splice cover 40 mm 11 s
• 4.3'' touch screen
• 7200 mAh battery allowing for an average of 320 splicing + heating cycles
• Electrode lifespan - approximately 5,000 splices
• Universal fiber holders
• Practical, capacious box
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
• 4-core processor for fast operation
• Positioning to the core or to the fiber cladding
• Ability to work in Auto mode or one of 41 presets
• Built-in optical power meter and VFL visual fault locator
• Image magnification x380
• The speed of the motors
• Min. splicing time 5 seconds
• Min. splicing time for splice cover 40 mm 11 s
• 4.3'' touch screen
• 7200 mAh battery allowing for an average of 320 splicing + heating cycles
• Electrode lifespan - approximately 5,000 splices
• Universal fiber holders
• Practical, capacious box
• Rich set of accessories
• Guillotine with autorotation function
• Menu in English or Polish
