English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The HDMI Slim cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius (40 mm).
• Length: 2 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
Signal HD's 3x1 Maki HDMI switch enables 3 high definition (HD) devices to be connected to a TV set equipped with an HDMI connector.
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Remote control
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
Signal PLB-40E E93132 mount has been designed to place a modern LCD/LED/OLED monitor / television on a wall. Its load capacity is 45 kg. Due to a special design, the rear of a TV/monitor is only 19 mm from the wall.
• Screen size range: 32'' - 55''
• Load capacity: 45 kg
• Distance from wall: 19 mm
• Mounting interface: VESA (max. 400x200)
• Load capacity: 45 kg
• Distance from wall: 19 mm
• Mounting interface: VESA (max. 400x200)
The LPA49-466 wall mount has been designed to place a modern and sleek LCD (OLED) TV on a wall.
• TV screen size range: 37"... -90”
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
The Signal R-4 signal splitter allows the division of CATV signals in the 5-1000 MHz band.
• DVB-T/T2 signal splitting into four channels
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
• Operating bandwidth 5-1000 MHz
• F-type connectors
• Cast aluminium alloy housing
The KMA20-221 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The KMA20-223 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
