English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The LPA49-466 wall mount has been designed to place a modern and sleek LCD (OLED) TV on a wall.
• TV screen size range: 37"... -90”
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits FM/DAB/TV signals into 8 paths
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Compact multiswitch in radial topology,
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
The SIGNAL 18 VDC / 1 A R71451 power supply is dedicated for multiswitches from the MRP series. The cable is terminated with F plug.
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
Signal LDA18-112N E93361 bracket has been designed to place a modern LCD/LED monitor or small television on a wall. Its load capacity is 15 kg. The wall mount allows easy adjustment of tilt (without additional tools) in the range of -12° to 8° degrees. It is also possible to rotate the panel horizon...
• Screen size range: 13"... 27"
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
Subscriber outlet integrating FM/TV/SAT antenna system with telephone network and LAN, from renowned Signal series of RF equipment (splitters, taps, transmitters, remote control extenders).
• Multifunctional terminal outlet
• FM/TV/SAT/Phone/LAN sockets
• For flush mounting
• Insertion loss below 3 dB
• FM/TV/SAT/Phone/LAN sockets
• For flush mounting
• Insertion loss below 3 dB
Signal R694140 is designed for installations where one coaxial cable feeds terrestrial TV, FM radio, and satellite TV signals (SAT1), and second one provides another independent satellite signal (SAT2). This ensures two independent satellite signals for a dual-tuner PVR receiver (capable of recordin...
• Can provide independent satellite signals to twin PVR receivers
• Can inject modulated RF signal from any local device (SAT receiver, DVD player etc.) into a whole home TV system
• For surface or flush mounting
• Loss in FM/TV band: 3.5 dB
• Loss of SAT1 output: 3.5 dB; SAT2 output: 3 dB
• Can inject modulated RF signal from any local device (SAT receiver, DVD player etc.) into a whole home TV system
• For surface or flush mounting
• Loss in FM/TV band: 3.5 dB
• Loss of SAT1 output: 3.5 dB; SAT2 output: 3 dB
Signal Signal LP42-22DT E93113 mount has been designed to place a modern LCD/LED/OLED television/monitor on a wall. Its load capacity is 50 kg. The mount allows easy adjustment of tilt (without additional tools) in the range of -10 to +5 degrees.
• Screen size range: 23''... 42''
• Tilt adjustment: -10° ... +5°
• Load capacity: 50 kg
• Distance from wall: 56 mm
• Mounting interface: VESA max 200x200
• Tilt adjustment: -10° ... +5°
• Load capacity: 50 kg
• Distance from wall: 56 mm
• Mounting interface: VESA max 200x200
