EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
![Antenna TRANS-DATA LTE KYZ 10/10 + 20 m cable + SMA [698-960, 1710-2700 MHz]](https://www.dipol.com.pl/img/thumbnails/a741024+.jpg/12f877def26a46ff8c0f1301832fe613.jpg)
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has 10 dBi gain and is equipped with a 10 m cable terminated with an SMA connector.
• Frequency range 698-2700 MHz
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 20 m
• SMA connectors
• Gain: 10 dBi
• VSWR <2
• Impedance 50 Ohm
• MIMO directional antenna
• Cable length: 20 m
• SMA connectors
The four-way GSM splitter is used to distribute the amplified signal to the indoor antennas. The splitter operates in the 800-2500 MHz band.
• Number of outputs: 4
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
• Bandwidth 800-2500 MHz
• Assurance: 6.6 dB
• Connectors: N-sockets
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 10 dBi.
• Bandwidth 698-2700 MHz
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
• Gain of 10 dBi
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
Antenna for receiving and transmitting signals in the 698-2700 MHz band. It has a gain of 9.5 dBi.
• Bandwidth 698-2700 MHz
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
• Gain 9.5 dBi
• VSWR <1,5
• Impedance 50 Ω
• Directional antenna
• Cable 20 cm
• N connectors
Protector used to protect GSM amplifiers against surges.
• Maximum power 200 W
• VSWR <1.1
• 0.2 dB attenuation
• VSWR <1.1
• 0.2 dB attenuation
An antenna for receiving and transmitting signals in the 806-2700 MHz band. It has a gain of 8 dBi and is equipped with a 12 cm cable terminated with an N connector.
• Band 806-2700 MHz
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• MIMO directional antenna
• 12 cm cable
• N connectors
• 8 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• MIMO directional antenna
• 12 cm cable
• N connectors
An omnidirectional antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 3 dBi and is equipped with a 15 cm cable terminated with an N connector.
• Band 806-2500 MHz
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
• Gain 3 dBi
• VSWR <1.5
• Impedance 50 ohm
• Omnidirectional antenna
• Cable 15 cm
• N-connector
Omnidirectional antenna for receiving and transmitting signals in the 824-1990 MHz band. It has a gain of 3 dBi.
• Band 824-1990 MHz
• 3 dBi gain
• VSWR <2.5
• Impedance 50 Ω
• Omnidirectional antenna
• SMA connector
• 3 dBi gain
• VSWR <2.5
• Impedance 50 Ω
• Omnidirectional antenna
• SMA connector
Antenna for receiving and transmitting signals in the 806-2500 MHz band. It has a gain of 10 dBi.
• Band 806-2500 MHz
• 10 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
• 10 dBi gain
• VSWR <1.5
• Impedance 50 ohm
• Directional antenna
• N-connector
The GSM taps are used to distribute the previously amplified GSM signal to the indoor antennas. Branch attenuation 5 dB.
• Transit attenuation <2.2 dB
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
• Branch attenuation 5 dB
• Inter output isolation >20 dB
• Bandwidth 800-2500 MHz
• VSWR <1,4
• Connectors: N-sockets
