High quality N-male connector for use with Tri-Lan 240 and Belden H-155 cables. The connector can be used in 5-6 GHz band. It features low insertion loss and high return loss.
• Designed for Tri-Lan 240 and Belden H-155 cables
• Suitable for applications in 5-6 GHz band
• Low loss and good matching
• Suitable for applications in 5-6 GHz band
• Low loss and good matching
Modern low-loss RF cable up to 6 GHz. White PVC coating suitable for indoor applications.
• 50Ω coaxial cable for WLAN and GSM installations
• White jacket - for applications inside buildings
• Perfect transmission parameters confirmed by tests
• White jacket - for applications inside buildings
• Perfect transmission parameters confirmed by tests
High quality N-female connector for use with Tri-Lan 240 and Belden H-155 cables. The connector can be used up to 6 GHz. It features low insertion loss and high return loss.
High quality SMA R/P male connector for use with Tri-Lan 240 and Belden H-155 cables. The connector can be used up to 6 GHz. It features low insertion loss and high return loss.
High quality SMA R/P female connector for use with Tri-Lan 240 and Belden H-155 cables. The connector can be used up to 6 GHz. It features low insertion loss and high return loss.
High quality TNC-male connector for use with Tri-Lan 240 and Belden H-155 cables. The connector can be used up to 6 GHz. It features low insertion loss and high return loss.
Modern low-loss RF cable up to 6 GHz. The cable guarantees not only efficient power transmission but also ensures savings on installation cost, in the process of migration from 2.4GHz to 5GHz band (it can work in both bands, so the cabling will not have to be replaced).
• 50Ω RF cable up to 6 GHz
• Low loss (as far as 20% lower than of H155)
• Perfect matching (30 dB at 2.4 GHz)
• High screening efficiency (90 dB at 2.4 GHz)
• CPR class: Fca
• Low loss (as far as 20% lower than of H155)
• Perfect matching (30 dB at 2.4 GHz)
• High screening efficiency (90 dB at 2.4 GHz)
• CPR class: Fca
Modern low-loss RF cable up to 6 GHz.
Modern low-loss RF cable up to 6 GHz.The cable guarantees not only efficient power transmission but also ensures savings on installation cost, in the process of migration from 2.4GHz to 5GHz band (it can work in both bands, so the cabling will not have to be replaced).
Modern low-loss RF cable up to 6 GHz.
High quality FME female connector for Tri-Lan 240 or Belden H-155 cable, perfect for installations operating in 5-6 GHz band. The connector is characterized by low attenuation and good impedance matching, especially important for such high operating frequencies.
The cable may be used in WLANs working at 2.4 GHz and 5 GHz. Application of this cable in 2.4 GHz system will allow to migrate the system in the future to 5 GHz, without a need of changing cabling.
The E1910 stand with 35 mm holding tube is used for unwinding coaxial cables from reels with max height/width of 390 mm and diameter up to 420 mm. A very useful accessory for every antenna installer.
• For convenient unwinding coaxial cables from reels
• 35 mm holding tube
• Max. max width/diameter of the reel: 390 mm / 420 mm
• Intended for Dipolnet RG-6 and Tri-Lan 240 cables
• 35 mm holding tube
• Max. max width/diameter of the reel: 390 mm / 420 mm
• Intended for Dipolnet RG-6 and Tri-Lan 240 cables