EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The monolithic nickel-plated brass F-connector is designed for RG-6 Tri-Shield cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
Crimping tool for F, BNC and IEC compression connectors designed for TRISET-113, TRISET-11 and CAMSET cable.
• Designed for crimping Platinum connectors
• Simple working principle
• Crimps F and BNC compression connectors
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset Profi
• Simple working principle
• Crimps F and BNC compression connectors
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset Profi
Cabelcon IEC socket for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
The monolithic nickel-plated brass F-connector is designed for Triset-11 PE cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
Top quality F-connector, designed to be crimped onto TRISET-113/Tri-shield DIPOLNET cable.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
High quality F-connector for use on TRISET-11 coax
• Type of connector: F compression
• Impedance: 75 Ω
• Material: industrial nickel plated
• Assembly method: PCB compression
• Wide operating bandwidth
• Very low attenuation across the entire operating band
• Tightness on the device side is ensured by a rubber gasket
• Dimensionally advanced to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: industrial nickel plated
• Assembly method: PCB compression
• Wide operating bandwidth
• Very low attenuation across the entire operating band
• Tightness on the device side is ensured by a rubber gasket
• Dimensionally advanced to the TRISET-11 / RG-11 cable family
IEC 113 MASTER compression F socket for Triset-113 cable.
• Connector type: IEC female
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
The monolithic nickel-plated brass BNC connector is designed for TRISET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
Cabelcon IEC angle connector for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
Cabelcon IEC angle socket for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
