High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Conforms to Class A+ standard
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
• Reaction to fire class in accordance with CPR - Dca-s2, d1, a1
• Made in LSZH jacket (LS0H) - halogen-free insulation
• Triple screen - first Al/PET/SY foil bonded to dielectric + 81% braid + second Al/PET foil bonded to jacket
• Conforms to IEC68-2 part 3 accelerated ageing standard
• Copper core 1.13 mm
• Low attenuation
• Excellent fit
• High screening efficiency - fulfils class A+++ requirement in most of the range
• 81% braid coverage
• 5 year warranty
TRISET 302 Dca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - Dca-s2, d1, a1.
• Compliant with the class A+ standard
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Dca-s2, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
TRISET 302 B2ca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - B2ca-s1a, d1, a1.
• Compliant with the class A+ standard
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class B2ca-s1a, d1, a1
• 1.02 mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
RG-11/TRISET-11 HF (halogen-free insulation) designed for the construction of RTV/SAT installations. It does not spread flame, smoke emission is very low and emitted gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath.
• CPR class: Cca
• 200 metres
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 100 metres
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
TRISET 302 Eca Tri-shield type in PVC jacket intended for the construction of TV/SAT systems. Fire reaction class in accordance with CPR - Eca.
• Conforms to class A+ standard
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Conforms to class A+ standard
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Eca
• Cable type RG-6
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PVC sheath
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A++
• Min. 77% braid coverage
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Complies with Class A++ standard
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1,05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
TRISET 302 Fca Tri-shield type, external made in PE casing intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant to class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Conductor of tri-shield construction
• Made in PE sheath
• Outdoor cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the requirement of class A+++
• Min. 77% braid coverage
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Bus cable
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
• PE sheath outer cable
• Resistant to UV radiation
• Gel to impede the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1.63 mm
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• 300 metres
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Complies with A+ class requirements
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13 mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Compliant with class A+++ standard
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
• Braided 82% tinned copper
• 10 dB higher interference suppression compared to class A+
• Tin-plated copper braid resistant to oxidation
• Copper core 1.05 mm
• Low attenuation
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH-coated cable
• CPR-compliant reaction to fire class - B2ca-s1a,d1,a1
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1.13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
High-quality TV/satellite coax (A-class, 16.65 dB/100 m at 860 MHz) in PE sheath, gel-filled. For outdoor applications.
• Suitable for all types of installations - especially for terrestrial and satellite TV networks
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
• PE-coated outer cable
• Resistant to UV radiation
• Gel to hinder the spread of moisture inside the cable
• Shielding class: A
• Copper core: 1,13 mm
• 81% aluminium braid
• Double screen: foil/sheath
• CPR class: Fca
• Sale by the metre
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm
• Aluminum braid 81%
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
TRISET-11 HF (halogen-free insulation) dedicated to SMATV systems. It does not spread flame, smoke emission is very low and the released gases are not corrosive.
• Bus cable
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
• 100% copper core 1.63 mm
• Halogen-free HF coating - does not emit toxic substances during combustion
• Designed for public buildings
• UV resistant
• Gel that hinders the spread of moisture inside the cable
• Shielding class: A
• 86% aluminium braid
• Double screen: foil/sheath
• CPR class: Cca
• 300 metres
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
The insulation stripper is a high-quality, multi-purpose tool used to prepare coaxial cables for the application of connectors.
• Versatile tool for preparing coaxial cables to install connectors
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 Eca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
The F-plug from Danish company Cabelcon is designed for home and community antenna installations. Patented construction based on the "Self-Install" technology.
• Unique cable mounting system
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Fits cables with a dielectric diameter of 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Fits cables with a dielectric diameter of 5.1 mm
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 B2ca, Dca, Fca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
Cabelcon IEC connector for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
The monolithic nickel-plated brass F-connector is designed for TRISET cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to TRISET-113 cable family
The monolithic nickel-plated brass F-connector is designed for RG-6 Tri-Shield cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the RG-6 Tri-Shield cable family
Crimping tool for F, BNC and IEC compression connectors designed for TRISET-113, TRISET-11 and CAMSET cable.
• Designed for crimping Platinum connectors
• Simple working principle
• Crimps F and BNC compression connectors
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset Profi
• Simple working principle
• Crimps F and BNC compression connectors
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset Profi
Cabelcon IEC socket for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
The monolithic nickel-plated brass F-connector is designed for Triset-11 PE cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Sealed on the device side by a rubber gasket
• Sealed on the cable side
• Dimensionally matched to the TRISET-11 / RG-11 cable family
Top quality F-connector, designed to be crimped onto TRISET-113/Tri-shield DIPOLNET cable.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Tightness on the device side is ensured by a rubber seal
• Dimensionally matched to the TRISET-113 and RG-6 cable family
High quality F-connector for use on TRISET-11 coax
• Type of connector: F compression
• Impedance: 75 Ω
• Material: industrial nickel plated
• Assembly method: PCB compression
• Wide operating bandwidth
• Very low attenuation across the entire operating band
• Tightness on the device side is ensured by a rubber gasket
• Dimensionally advanced to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: industrial nickel plated
• Assembly method: PCB compression
• Wide operating bandwidth
• Very low attenuation across the entire operating band
• Tightness on the device side is ensured by a rubber gasket
• Dimensionally advanced to the TRISET-11 / RG-11 cable family
IEC 113 MASTER compression F socket for Triset-113 cable.
• Connector type: IEC female
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
The monolithic nickel-plated brass BNC connector is designed for TRISET cables.
• Connector type: BNC compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
Cabelcon IEC angle connector for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
Cabelcon IEC angle socket for RG-6/Triset-113 cable. Patented design, based on "Self-Install" technology.
• Easy to install
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
• Frequency response up to 3 GHz
• Shielding class A
• No tools required
• Reusable
• Fits cables with a dielectric diameter of 4.9 - 5.1 mm
A spanner is a tool that every installer should have. With its help, it will be possible to tighten all the fittings precisely.
• Easy installation of F-type connectors
• Especially helpful in multiswitch systems
• Built-in stripper
• Especially helpful in multiswitch systems
• Built-in stripper
M IEC 113 MASTER compression connector for Triset-113 cable.
• Connector type: IEC male
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
Monolithic, made of nickel-plated brass, the 90 F 113 angle connector (screw-on) is designed for TRISET cables.
• Connector type: F compression, angled
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
Monolithic, made of nickel-plated brass, the 90 QF 113 angle compression connector is designed for TRISET cables.
• Connector type: F compression, angled, 'quick'
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
• Does not need to be screwed onto a threaded socket
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the Triset-113 family of cables
90 F IEC 113 MASTER compression angle connector for TRISET-113 cable.
• Connector type: IEC male angled
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
90 F IEC 113 MASTER compression angle socket for TRISET-113 cable.
• Connector type: IEC female angled
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
• Impedance: 75 Ω
• Material: brass 360
• Mounting method: longitudinal compression
• Wide operating bandwidth
• Very low attenuation throughout the operating band
• Dimensionally matched to the TRISET-113 family of cables
The MM-412 insulation stripper is a universal tool used to prepare coaxial cables for the application of connectors.
• Preparing coaxial cables for jointing
• Two adjustable cable cutters: RG-59, RG-6, TRISET
• Insulation stripping tool for telephone or computer cables
• Cable cutter for cutting cables
• Blade can be replaced
• Two adjustable cable cutters: RG-59, RG-6, TRISET
• Insulation stripping tool for telephone or computer cables
• Cable cutter for cutting cables
• Blade can be replaced
Typical IEC television plug, e.g. for a television receiver.
• Connector type: IEC male
• Fits to TRISET-113 and RG-6 DIPOLNET cable family
• Fits to TRISET-113 and RG-6 DIPOLNET cable family
Typical IEC TV socket.
• Connector type: IEC female
• Fits to TRISET-113 and RG-6 DIPOLNET cable family
• Fits to TRISET-113 and RG-6 DIPOLNET cable family
The MASTER ZZ-071 universal crimping tool is designed for F, BNC and IEC compression connectors.
• Crimping machine designed for MASTER compression fittings
• Metal body
• Highly durable tool made of the highest quality materials
• Compact size
• Clips compression connectors: F, BNC, IEC
• Crimps connectors in various lengths - piston adjustment
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset-302
• Metal body
• Highly durable tool made of the highest quality materials
• Compact size
• Clips compression connectors: F, BNC, IEC
• Crimps connectors in various lengths - piston adjustment
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset-302
The VHD-15 repeater is designed to amplify video signals transmitted via twisted-pair or coaxial cable.
• Standard: AHD - 4 Mpx, HD-CVI - 1080p, HD-TVI - 5 Mpx, CVBS - PAL / NTSC
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
• Signal compensation: 150 m twisted-pair cable, 300 m RG-59, 500 m Triset-113
The MASTER ZZ-070 universal crimper is designed for F, BNC and IEC compression connectors.
• Crimping machine designed for MASTER compression fittings
• Cast body
• Highly durable tool made of the highest quality materials
• Compact size
• Clips compression connectors: F, BNC, IEC
• Crimps connectors in various lengths - piston adjustment
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset-302
• Cast body
• Highly durable tool made of the highest quality materials
• Compact size
• Clips compression connectors: F, BNC, IEC
• Crimps connectors in various lengths - piston adjustment
• Clips connectors on cables of class: RG-59, RG-6, Triset-113, Triset-302
The MASTER E80078 universal compression tool is designed for compressing straight and angular F, BNC, RCA, IEC connectors.
• Universal tool for TV/CCTV installers
• Designed for compression of straight and angular F, RCA, BNC, IEC connectors
• Durable tool made from the highest quality materials
• Suitable for connectors with various lengths (adjustment screw)
• Suitable for RG-59, RG-6, Triset-113, Triset Profi cables
• Designed for compression of straight and angular F, RCA, BNC, IEC connectors
• Durable tool made from the highest quality materials
• Suitable for connectors with various lengths (adjustment screw)
• Suitable for RG-59, RG-6, Triset-113, Triset Profi cables
F connector crimped onto Triset-11/RG-11 cable.
• Connector type: F crimped
• Diameter: 10 mm
• Material: nickel-plated copper
• Installation requires a crimping tool
• Dedicated to cables of class TRISET-11 / RG-11
• Diameter: 10 mm
• Material: nickel-plated copper
• Installation requires a crimping tool
• Dedicated to cables of class TRISET-11 / RG-11
MASTER is a multipurpose tool suitable for compressing F, BNC, RCA, and IEC compression connectors.
• Crimping tool designed for MASTER compression fittings
• Highly durable tool made of the highest quality materials
• Compact size
• Clips compression connectors: F, RCA, BNC, IEC
• Clips connectors in various lengths - built-in piston stroke reducer
• Clips connectors on cable class: RG-59, RG-6, Triset-113, Triset Profi
• Highly durable tool made of the highest quality materials
• Compact size
• Clips compression connectors: F, RCA, BNC, IEC
• Clips connectors in various lengths - built-in piston stroke reducer
• Clips connectors on cable class: RG-59, RG-6, Triset-113, Triset Profi
The stand with a fixing tube diameter of 35 mm is used to unwind rolled coaxial cable from a reel with a maximum width of 340 mm and a reel diameter of 390 mm.
• Provides convenient cable unwinding during installation
• Fastening tube diameter 35 mm
• Max. width / diameter of reel: 340 mm / 390 mm
• Suitable for Triset-113, RG-6 Dipolnet and Tri-Lan 240 cables
• Fastening tube diameter 35 mm
• Max. width / diameter of reel: 340 mm / 390 mm
• Suitable for Triset-113, RG-6 Dipolnet and Tri-Lan 240 cables



