English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The ASP-8W LUX broadband antenna with LNA-177 amplifier receives DVB-T/T2 TV signals in the VHF and UHF bands in horizontal polarization.
• Performs in densely built-up areas
• Gain up to 14 dBi
• Built-in LNA-177 30 dB amplifier
• UHF and VHF bands
• Wide half power angle
• Power supply included
• Gain up to 14 dBi
• Built-in LNA-177 30 dB amplifier
• UHF and VHF bands
• Wide half power angle
• Power supply included
The broadband antenna is made of aluminum, with structural elements (U-bolt, nuts, washers) of electro-galvanized steel. It can be used without a mast (e.g. placed on a window sill).
• Suitable for dense urban areas
• 14 dBi gain
• Equipped with a balun
• A version with a preamplifier is also available
• 14 dBi gain
• Equipped with a balun
• A version with a preamplifier is also available
Antenna packed in foil. Aluminum active elements, electro-galvanized steel structural components. The antenna can be used without a mast (e.g. placed on a window sill).
• Small-size directional DVB-T/T2 antenna
• Good choice in areas with many buildings
• Gain up to 11 dBi
• Wide beam
• Good choice in areas with many buildings
• Gain up to 11 dBi
• Wide beam
The broadband DIPOL ASP-8 PM A0060 TV antenna has been designed for receiving DVB-T and DAB channels broadcast in vertical and horizontal polarization in the VHF band (174-230 MHz), and DVB-T channels broadcast in horizontal polarization in the UHF (470-790 MHz) band.
• Broadband DVB-T and DAB antenna
• VHF (ch. 5-12) - vertical and horizontal polarization
• UHF (ch. 21-60) - horizontal polarization
• Active elements made of aluminum
• Modern design - high gain despite slim form factor
• Made in Poland
• VHF (ch. 5-12) - vertical and horizontal polarization
• UHF (ch. 21-60) - horizontal polarization
• Active elements made of aluminum
• Modern design - high gain despite slim form factor
• Made in Poland
DIPOL-1/5-12 A0110 is a professional, 1-element antenna designed for reception of digital TV (DVB-T: channels 5-12, 174-230 MHz) and radio (DAB/DAB+) broadcasts. Due to its pattern and 2 dBi gain, the antenna is perfect for urban areas with DVB-T/T2 and DAB transmitters. The versatile design of the ...
• Antenna designed for reception of digital TV multiplexes (DVB-T: channels 5-12) and radio broadcasts (DAB, DAB+)
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
• 2 dBi gain
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
• 2 dBi gain
DIPOL-4/5-12 A0140 is a professional, 4-element antenna designed for reception of digital TV (DVB-T/T2: channels 5-12, 174-230 MHz) and radio (DAB/DAB+) broadcasts. Due to its pattern and 6 dBi gain, the antenna is perfect for urban areas with DVB-T and DAB transmitters. The versatile design of the ...
• Antenna designed for reception of digital TV multiplexes (DVB-T, ch. 5-12) and radio broadcasts (DAB, DAB+)
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
• 6 dBi gain
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
• 6 dBi gain
FM antenna (88-108 MHz), packed in foil. The active element made of aluminum. Electro-galvanized steel structural components. The set includes matching transformer (balun).
• Designed for reception of FM radio
• Gain up to 0 dBi
• Can be mounted for H or V polarized signals
• Aluminum dipole, galvanized steel structural elements
• Built-in balun
• Gain up to 0 dBi
• Can be mounted for H or V polarized signals
• Aluminum dipole, galvanized steel structural elements
• Built-in balun
Compact FM antenna (88-108 MHz), omnidirectional, packed in foil. Active elements made of aluminum. Electro-galvanized steel structural components. The set includes matching transformer (balun).
• Very popular FM antenna used in both individual and shared-antenna systems
• 1dBi gain
• Horizontal polarization
• Electro-galvanized steel structural components
• Matching transformer included
• 1dBi gain
• Horizontal polarization
• Electro-galvanized steel structural components
• Matching transformer included
Compact FM antenna (88-108 MHz), omnidirectional (H/V). Active parts made of anodized aluminum (gold color). Electro-galvanized steel structural components. The set includes combiner/matching transformer (balun).
• Popular FM antenna used in individual and shared antenna systems
• Omni-directional antenna with gain ca. 0 dBi
• For H and V polarizations
• Matching transformer (balun) included
• Omni-directional antenna with gain ca. 0 dBi
• For H and V polarizations
• Matching transformer (balun) included
FM antenna (88-108 MHz) with dual polarization (H+V), packed in foil. Aluminum active part, electro-galvanized steel structural components. The set includes matching transformer (balun).
FM antenna (88-108 MHz), H/V polarizations (H - bidirectional, V - omnidirectional) with 75 ohm impedance.
• FM antenna (88-108 MHz)
• Max gain of 0 dBi
• Length (height): 1670 mm
• Electro-galvanized steel structural components
• Max gain of 0 dBi
• Length (height): 1670 mm
• Electro-galvanized steel structural components
FM antenna (88-108 MHz), H/V polarizations (H - bidirectional, V - omnidirectional) with 75 ohm impedance (built-in amplifier, without power supply).
• FM radio antenna
• Operating band: 88-108 MHz
• 20 dB amplifier
• Can be easily mounted by a window or on a balcony
• Length: 1670 mm
• Operating band: 88-108 MHz
• 20 dB amplifier
• Can be easily mounted by a window or on a balcony
• Length: 1670 mm
SONUS-FM is an indoor radio antenna with an 18 dB amplifier.
• Band 88 - 108 MHz (FM)
• Built-in 18 dB amplifier
• H/V polarization
• Number of elements: 1
• Power supply included
• Built-in 18 dB amplifier
• H/V polarization
• Number of elements: 1
• Power supply included
Broadband TV antenna with amplifier 40 dB powered from USB port.
• TV antenna, broadband
• Amplification up to 40 dB with steeples adjustment
• Output impedance: 75 Ohm
• USB supply: 5V/25 mA
• Amplification up to 40 dB with steeples adjustment
• Output impedance: 75 Ohm
• USB supply: 5V/25 mA
SONUS-TV is an indoor TV antenna with a 25 dB amplifier.
• Frequency band 174 - 862 MHz (VHF, UHF)
• Built-in 25 dB amplifier
• H/V polarization
• Number of components 1
• Power adapter included
• Built-in 25 dB amplifier
• H/V polarization
• Number of components 1
• Power adapter included
DIPOL 3 RZ FM B is a 3-element antenna designed to receive FM radio signals in horizontal H or vertical V polarization.
• Frequency range 88-108 MHz (FM)
• Max gain. 5 dBi
• H/V polarization
• Directional radiation pattern
• Number of elements: 3
• Max gain. 5 dBi
• H/V polarization
• Directional radiation pattern
• Number of elements: 3
DIPOL 3/21-60 is a 3-element antenna designed for the reception of digital DVB-T/T2 signals in the UHF band with horizontal polarization H.
• 470-790 MHz (UHF) band
• Max. gain 5 dBi
• With a balun
• LNA series amplifier can be used
• Directional radiation pattern
• Number of elements: 3
• Max. gain 5 dBi
• With a balun
• LNA series amplifier can be used
• Directional radiation pattern
• Number of elements: 3
DIPOL-7/5-12 A0710 is a professional, 7-element antenna designed for reception of digital TV (DVB-T/T2: channels 5-12, 174-230 MHz) and radio (DAB/DAB+) broadcasts. The versatile design of the mount allows for easy change of the antenna polarization (V or H). The parts of the antenna are made of alu...
• Antenna designed for reception of digital TV multiplexes (DVB-T/T2, ch. 5-12) and radio broadcasts (DAB, DAB+)
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
• Operation band: 170-230 MHz
• Directional characteristics
• Vertical or horizontal polarization (depending on mounting position)
DIPOL-11/21-60 is an 11-element antenna designed for receiving DVB-T/T2 digital television signals broadcast in UHF band in H polarization.
• Band: 470 - 790 MHz (UHF)
• Gain max. 10 dBi
• H polarization
• Directional radiation pattern
• Number of elements: 11
• Gain max. 10 dBi
• H polarization
• Directional radiation pattern
• Number of elements: 11
VHF antenna (ch. 5-12), suitable for reception of low signals. Antenna packed in foil. Aluminum parts, electro-galvanized steel structural components. The set includes impedance transformer.
• Band: 170 - 230 MHz (VHF)
• Max. gain: 9 dBi
• Polarisation: H/V
• Directional characteristics
• Number of elements: 11
• Max. gain: 9 dBi
• Polarisation: H/V
• Directional characteristics
• Number of elements: 11
The DIPOL 15/5-12/21-60 DVB-T A1515 professional DVB-T/T2 antenna set has been designed for reception of TV broadcasts in VHF (174-230 MHz) and UHF (470-790 MHz) bands. Thanks to a universal construction, the VHF and UHF antenna segments can be set to the vertical (V) or horizontal (H) polarization ...
• Combo antenna - reception of all TV bands
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Profit max. 11 dBi (UHF), 4 dBi (VHF)
• H/V polarization - for both bands
• Directional radiation pattern
• Number of elements: 15
• Band 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Profit max. 11 dBi (UHF), 4 dBi (VHF)
• H/V polarization - for both bands
• Directional radiation pattern
• Number of elements: 15
Outdoor TV antenna A1610 is designed for receiving both digital (DVB-T) and analog terrestrial TV signals. This compact device has a decent 12 dBi gain. Antenna for channels 21-60, with in-built impedance transformer. Elements screwed down to the carrier. Assembling (mounting the reflector with two ...
• Popular, low-cost DVB-T antenna
• Small size (length: 89 cm)
• Suitable for use in most reception conditions
• Gain of 12 dBi
• Small size (length: 89 cm)
• Suitable for use in most reception conditions
• Gain of 12 dBi
The A1615 outdoor UHF antenna has been designed both for reception of DVB-T/T2 broadcasts and analog TV signals. It is characterized by small dimensions and high gain. The antenna array and built-in amplifier give a total gain up to 42 dBi.
DIPOL 19/21-60 tube is a 19-element antenna designed for reception of digital DVB-T/T2 television signals in UHF band in horizontal H polarization.
• Band: 470 - 694 MHz (UHF)
• Gain max. 14 dBi
• H polarization
• Directional radiation pattern
• Possible to use LNA repeater
• Number of elements: 19
• Gain max. 14 dBi
• H polarization
• Directional radiation pattern
• Possible to use LNA repeater
• Number of elements: 19
DIPOL 19/21-60 DIGITAL is a 19-element antenna designed for reception of digital DVB-T/T2 television signals in UHF band in horizontal H polarization.
• Band: 470 - 694 MHz (UHF)
• Gain max. 14 dBi
• Built-in LNA-177 30 dB repeater
• H polarization
• Directional radiation pattern
• Number of elements: 19
• Gain max. 14 dBi
• Built-in LNA-177 30 dB repeater
• H polarization
• Directional radiation pattern
• Number of elements: 19
DIPOL SMART CITY is a directional TV antenna designed to receive digital terrestrial television DVB-T2 in UHF band. It is designed for smaller systems.
• Designed to receive DVB-T2 terrestrial TV signals in the UHF band,
• Channels 21-48 (470-694 MHz),
• Passive or active operating modes,
• Directional pattern,
• 2 mounting versions: "full" and "compact",
• Made of aluminum and ABS,
• Reinforced main bar,
• Sealed box with an F-type connector,
• Tool-free assembly in 3 minutes,
• Built-in LTE 700 filter.
• Channels 21-48 (470-694 MHz),
• Passive or active operating modes,
• Directional pattern,
• 2 mounting versions: "full" and "compact",
• Made of aluminum and ABS,
• Reinforced main bar,
• Sealed box with an F-type connector,
• Tool-free assembly in 3 minutes,
• Built-in LTE 700 filter.
The DVB-T2 TV antenna DIPOL SMART CITY COMBO A2050 is a directional antenna, suitable for receiving DVB-T2 digital terrestrial television in the VHF (174-230 MHz) and UHF (470-694 MHz) bands. Built-in antenna amplifier with a bypass.
• Combo antenna: reception of all TV bands
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 12 dBi (UHF) and 4.9 dBi (VHF)
• Gain + amplification: 23.6 dB (UHF) and 24.7 dBi (VHF)
• Polarization: H/V - for both bands
• Directional radiation pattern
• Number of elements: 13
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 12 dBi (UHF) and 4.9 dBi (VHF)
• Gain + amplification: 23.6 dB (UHF) and 24.7 dBi (VHF)
• Polarization: H/V - for both bands
• Directional radiation pattern
• Number of elements: 13
DIPOL SMART HORIZON is a directional TV antenna designed to receive digital terrestrial television DVB-T2 in UHF band. It is intended for individual and SMATV systems.
• Designed to receive DVB-T2 terrestrial television signals in the UHF band,
• Channels 21-48 (470-694 MHz),
• Passive or active operation,
• Directional pattern,
• Made of aluminum and ABS,
• Reinforced main bar,
• Hermetic box with F-type connector,
• Tool-free assembly in 90 seconds,
• Built-in LTE 700 filter,
• Application in individual and SMATV systems.
• Channels 21-48 (470-694 MHz),
• Passive or active operation,
• Directional pattern,
• Made of aluminum and ABS,
• Reinforced main bar,
• Hermetic box with F-type connector,
• Tool-free assembly in 90 seconds,
• Built-in LTE 700 filter,
• Application in individual and SMATV systems.
The DVB-T2 DIPOL SMART HORIZON COMBO TV antenna is designed to receive DVB-T2 digital terrestrial television in the VHF and UHF bands. The bypass allows it to operate in two modes – passive and active.
• Combo antenna: reception of all TV bands
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 14 dBi (UHF) and 5.7 dBi (VHF)
• Gain + amplification: 26.2 dBi (UHF) and 23.8 dBi (VHF)
• H/V polarization: for both bands
• Directional radiation pattern
• Number of elements: 28
• Band: 170 - 230 MHz (VHF), 470 - 694 (UHF)
• Max. gain: 14 dBi (UHF) and 5.7 dBi (VHF)
• Gain + amplification: 26.2 dBi (UHF) and 23.8 dBi (VHF)
• H/V polarization: for both bands
• Directional radiation pattern
• Number of elements: 28
DIPOL 17/21-69 Tri-Digit MINI is a directional UHF antenna optimized for reception of DVB-T/T2 digital terrestrial television. The antenna gain is 14 dBi.
• Band: 470 - 694 MHz (UHF)
• Gain max. 14 dBi
• H polarization
• Only 0.6 m long
• Directional radiation pattern
• Supports LNA repeaters
• Number of elements: 19
• Gain max. 14 dBi
• H polarization
• Only 0.6 m long
• Directional radiation pattern
• Supports LNA repeaters
• Number of elements: 19
44-element antenna for the whole UHF band (ch. 21-69), designed for receiving digital TV broadcasts (DVB-T) and analog TV channels. Due to special design of the array, the antenna has a very high gain (despite its compact size - length: 104 cm). It is equipped with impedance transformer. The main el...
• For individual and shared antenna systems
• Gain: 14-16.8 dB
• Balun included
• There is a version with RF amplifier installed
• Gain: 14-16.8 dB
• Balun included
• There is a version with RF amplifier installed
DIPOL Tri Digit is 44-element antenna for the whole UHF band (ch. 21-48), suitable for reception analog and digital TV broadcasts (DVB-T/T2). Due to special design of the array (despite its compact size - length: 104 cm) the antenna has a very high gain. The antenna and built-in amplifier can provid...
• Popular DVB-T antenna with avery high gain
• Beam width suitable for use in cities
• Main elements made of aluminum
• Pre-mounted (ca. 90%)
• The kit includes amplifier and power supply
• Beam width suitable for use in cities
• Main elements made of aluminum
• Pre-mounted (ca. 90%)
• The kit includes amplifier and power supply
The antenna with H/V polarization Dipol 28/5-12/21-60 (28 elements) with LNA-101 amplifier is designed to receive DVB-T/T2 digital terrestrial television in VHF and UHF bands.
• Combo antenna – reception of all TV bands
• 170-230 MHz (VHF), 470-790 (UHF) bands
• Gain max. 9 dBi (UHF), 4 dBi (VHF)
• Built-in 15 dB LNA-101 amplifier in UHF part
• H/V polarization for both bands
• Directional radiation pattern
• Number of elements: 28
• 170-230 MHz (VHF), 470-790 (UHF) bands
• Gain max. 9 dBi (UHF), 4 dBi (VHF)
• Built-in 15 dB LNA-101 amplifier in UHF part
• H/V polarization for both bands
• Directional radiation pattern
• Number of elements: 28
The antenna with H/V polarization Dipol 28/5-12/21-48 (28 elements) with LNA-169 amplifier is designed to receive DVB-T/T2 digital terrestrial television in VHF and UHF bands.
• Combo antenna – reception of all TV bands
• 170-230 MHz (VHF), 470-694 (UHF) bands
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• Built-in 24 dB LNA-169 5G amplifier in UHF part
• H/V polarization for both bands
• Directional radiation pattern
• Number of elements: 28
• 170-230 MHz (VHF), 470-694 (UHF) bands
• Gain max. 14 dBi (UHF), 7 dBi (VHF)
• Built-in 24 dB LNA-169 5G amplifier in UHF part
• H/V polarization for both bands
• Directional radiation pattern
• Number of elements: 28
The OTM302T optical transmitter is used to create fiber optic RF/SAT systems and the implementation of transmissions at a wavelength of 1310 nm.
• FP laser
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
• 1310 nm wavelength
• +6 dBm optical output power
• Built-in RF converter
• Die-cast housing guarantees high level of screening – class A
• AGC – automatic gain control stabilizes the signal level
• LEDs on the housing make it much easier to properly configure the entire system
The OTF302 6F31 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1310 nm wavelength (transmission window II).
• FP type laser
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1310 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
TERRA's LWO102 4F31 E optical LNB is used to create SAT systems using fiber optic technology.
• FP laser
• Wavelength 1310 nm
• Power at optical output +4 dBm
• Single-mode fiber
• Type of optical connector: FC/UPC
• Wavelength 1310 nm
• Power at optical output +4 dBm
• Single-mode fiber
• Type of optical connector: FC/UPC
The OTF302 6F55 E TERRA optical transmitter is used to create TV/SAT systems using optical fibre technology and transmission at 1550 nm wavelength (transmission window III).
• FP type laser
• Wavelength 1550 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
• Wavelength 1550 nm
• Power at optical output +6 dBm
• Open housing ensuring high level of shielding – class A
• AGC – automatic gain control stabilizing signal level
• LEDs on the housing for much easier configuration of the entire system
The ORF202 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORQ302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E A3031 or OTF302 6F55 E A3055 transmitter into an electrical signal. QUATRO + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORF302 E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal. Wideband + DVB-T2 type output.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORQ302F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
• Acceptable power level at the optical input -15...-5 dBm
• Die-cast housing ensuring a high level of shielding – class A
• OLC – automatic control stabilizing the signal level
• LEDs on the housing for much easier configuration of the entire system
• DC power supply directly from the connected multiswitch or an external DC power supply 10...20 V, which is optional equipment
The ORD301F E optical receiver allows the conversion of the optical signal coming from the OTF302 6F31 E or OTF302 6F55 E transmitter into an electrical signal
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
• Acceptable power level at the optical input -15...-5 dBm
• Open housing ensuring high level of shielding – class A
• OLC – automatic control stabilizing signal level
The ORL302F E optical receiver enables the conversion of optical signals into Legacy, Wideband and Radio/DVB-T2 electrical signals.
• Wavelength 1100...1650 nm
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
• Acceptable power level at the optical input -15...-5 dBm
• Open casing to ensure a high level of shielding – class A
• OLC - automatic control to stabilize the signal level
• LEDs on the casing greatly facilitating the proper configuration of the entire system
The logarithmic antenna is a modern broadband, dual-polarization antenna dedicated to receiving DVB-T/T2 digital terrestrial television in the VHF and UHF bands.
• Band 174 - 230 MHz (VHF) and 470 - 790 MHz (UHF)
• Gain max. 8 dBi (VHF), 9 dBi (UHF)
• H polarization for the UHF band
• H/V polarization for the VHF band
• Directional performance characteristics
• Impedance 75 Ω - no need to use a balun
• Gain max. 8 dBi (VHF), 9 dBi (UHF)
• H polarization for the UHF band
• H/V polarization for the VHF band
• Directional performance characteristics
• Impedance 75 Ω - no need to use a balun
The DVB-T/T2 5-12/21-60 television antenna is designed for indoor and outdoor use, for receiving DVB-T/T2 digital terrestrial television in the VHF and UHF bands.
• DVB-T antenna for indoor or outdoor use
• Receiving signals with horizontal and vertical polarization
• Low-noise high-gain amplifier
• Integrated LTE filter,
• High-quality materials resistant to UV radiation
• Receiving signals with horizontal and vertical polarization
• Low-noise high-gain amplifier
• Integrated LTE filter,
• High-quality materials resistant to UV radiation
Satellite dish, offset antenna galvanized painted, 80 cm, designed for use in small systems.
• Size: 80 cm
• Material: steel
• Resistant to strong winds
• Max. gain 38.5 dBi
• Material: steel
• Resistant to strong winds
• Max. gain 38.5 dBi
• high quality and resistance to weather conditions
• durable construction
• new reinforced mount
• wide range of azimuth-elevation adjustment
• durable construction
• new reinforced mount
• wide range of azimuth-elevation adjustment
80 cm dish (powder-painted galvanized steel) for receiving programs from one or two close satellites (with two LNBs on a double mount). The dish is characterized by stable construction that ensures perfect reception of satellite broadcasts. Another advantage of the dish is quick assemblage (our tech...
• Dimension: 80 cm
• Material: steel
• Wind-proof construction
• Max. gain: 38,3 dBi
• Material: steel
• Wind-proof construction
• Max. gain: 38,3 dBi
![Steel Satellite Dish: FAMAVAL 80 SP 30 [dark]](https://www.dipol.com.pl/img/thumbnails/a9654+.jpg/9ad0dd50d167901fef7ad9c76097e667.jpg)
80 cm, graphite satellite dish for reception of satellite signal from one or two close satellite positions (multifeed configuration).
• Size: 80 cm
• Material: steel
• Resistant to strong winds
• Max. gain 38.3 dBi
• Material: steel
• Resistant to strong winds
• Max. gain 38.3 dBi
![Steel Satellite Dish: TRX-EL 90 FAMAVAL (90 cm) [graphite]](https://www.dipol.com.pl/img/thumbnails/a9655+.jpg/2afe52cbc3efd4c4eb547aae52b248d3.jpg)
The FAMAVAL 90 TRX-EL steel satellite dish (dimensions 90.5 cm 83.4 cm) offers excellent signal reception.
• Size: 90 cm
• Material: steel
• Resistant to strong winds
• Max. gain 38,7 dBi
• Material: steel
• Resistant to strong winds
• Max. gain 38,7 dBi
![Satellite Dish FAMAVAL TRX-EL 110 [dark]](https://www.dipol.com.pl/img/thumbnails/a9659+.jpg/b26cc5ba4823f8d4c061c5d7be913473.jpg)
FAMAVAL 110 TRX EL A9659 high-gain satellite dish (119 cm x 110 cm) provides reliable reception in all weather conditions or in regions with low signal levels. The high-tech steel dish is extremely weather resistant.
• 110 cm dark satellite dish
• Real reflector size: 114.5 x 105 cm
• Gain: 41.2 dBi
• Mountable on a mast with diameter up to 60 mm
• Steel construction for stability in any weather conditions
• Perfect for SMATV and high quality individual SAT TV systems
• Real reflector size: 114.5 x 105 cm
• Gain: 41.2 dBi
• Mountable on a mast with diameter up to 60 mm
• Steel construction for stability in any weather conditions
• Perfect for SMATV and high quality individual SAT TV systems
![Satellite Dish: TRX-EL 100 FAMAVAL [light colour]](https://www.dipol.com.pl/img/thumbnails/a9666+.jpg/75084a784ead9b791d440ddf381deba0.jpg)
FAMAVAL 100 cm steel satellite dish is made of galvanized steel.
• Size: 100 cm
• Material: steel
• Color: white
• Resistant to strong winds
• Gain max 40,3 dBi
• Material: steel
• Color: white
• Resistant to strong winds
• Gain max 40,3 dBi
![Satellite Dish: TRX-EL 100 FAMAVAL [graphite]](https://www.dipol.com.pl/img/thumbnails/a9667+.jpg/3ab8f191ac5e2cb0a2e286ccc788f54f.jpg)
FAMAVAL 100 cm steel satellite dish is made of galvanized steel.
• Size: 100 cm
• Material: steel
• Color: graphite
• Resistant to strong winds
• Gain max 40,3 dBi
• Material: steel
• Color: graphite
• Resistant to strong winds
• Gain max 40,3 dBi
![Satellite dish: DIPOL DPL-120 [light grey, RAL7035]](https://www.dipol.com.pl/img/thumbnails/a9682+.jpg/e3ea8e533494b25636c83315da7db4f5.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard.
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
• Size: 120 cm (122x129 cm)
• Gain max. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point dish mounting to intermediate dish
• Meets IEC1114-2 wind resistance standard
• Antenna has been salt bath tested to NBR 8094 standard.
• The LNB is mounted on a bracket with two additional brackets.
• Second LNB bracket included
![Satellite dish DIPOL DPL-120 + stub [dark graphite, RAL7016]](https://www.dipol.com.pl/img/thumbnails/a9684+.jpg/380d7369ec3d0738a2ae514cef5c6779.jpg)
The DPL-120 satellite dish is a professional satellite dish dedicated for building SMATV systems in multi-family buildings.
• Dish dedicated for SMATV systems
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
• Size: 120 cm (122x129 cm)
• Max gain. 42.1 dBi at 12.75 GHz
• Half power angle: 1.4 degrees at 12.75 GHz
• 6-point mounting to an intermediate dish
• Complies with IEC1114-2 wind resistance standard
• Tested in brine bath according to NBR 8094
• LNB mounted with a holder with two additional brackets
• Second LNB holder included
The bracket is designed for mounting on DIPOL DPL-120 dish. It enables the second LNB to be mounted on a single extension arm of a satellite dish.
• Designed for DIPOL DPL-120 cm dish
• Enables installation of a second LNB.
• Enables installation of a second LNB.
Low noise LNB LWB202L Wideband LO 10.41 GHz for SAT systems
• LNB type: Wideband
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
• LO oscillator frequency: 10.41 GHz
• Low-noise LNB
• Two outputs: V-polarization, H-polarization
• Bracket diameter: 40 mm
The GT-WB1 LNB is dedicated for applications in multiswitch systems using Wide Band technology. It is based on a single local oscillator operating at 10.41 GHz.
• LNB type: Wide band for multiswitch systems
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
The IDLU-32L412-UNBRR-OPN Unicable II /nc+/ with UNICABLE output can feed from its single output up to 32 satellite receivers (tuners).
• LNB type: Unicable
• Number of outputs: 1
• Programmed to work with nc+/canal+
• Gain min. 55 dB
• Holder diameter 40 mm
• Number of outputs: 1
• Programmed to work with nc+/canal+
• Gain min. 55 dB
• Holder diameter 40 mm
The IDLU-32UL40-UNBOO-OPP /cyfr. polsat/ LNB with UNICABLE output can supply from its single output up to 32 satellite receivers (tuners).
• LNB type: Unicable
• Number of outputs: 1
• Programmed to work with Cyfrowy Polsat decoders
• Gain min. 55 dB
• Holder diameter 40 mm
• Number of outputs: 1
• Programmed to work with Cyfrowy Polsat decoders
• Gain min. 55 dB
• Holder diameter 40 mm
GT-SAT GT-S1dCSS24 LNB with the UNICABLE I/II and Legacy outputs
• LNB type: Unicable + SINGLE
• Number of outputs: 2 (1x Unicable, 1x Legacy)
• Gain max. 62 dB
• Holder diameter 40 mm
• Number of outputs: 2 (1x Unicable, 1x Legacy)
• Gain max. 62 dB
• Holder diameter 40 mm
The GT-SAT GT-S2dCSS24 satellite LNB, mounted on a satellite dish (e.g. A9642www.dipolnet.com/steel_satellite_dish_triax_80_td_dark_gray__A9642.htm), can feed up to 24 satellite receivers (tuners) from its UNICABLE I/II output over one coaxial cable. The LNB supports EN50494 (Unicable I) and EN50607...
• LNB type: Unicable + TWIN
• Number of outputs: 3 (1x Unicable, 2x Legacy)
• Max. gain 62 dB
• Neck diameter: 40 mm
• Number of outputs: 3 (1x Unicable, 2x Legacy)
• Max. gain 62 dB
• Neck diameter: 40 mm
The IDLP-WDB401 is an LNB used in multiswitch systems operating in Wide Band technology.
• Wideband LNB
• Local oscillator: 10.41 GHz
• Low noise
• Local oscillator: 10.41 GHz
• Low noise
LNB with 3 Unicable II outputs and one Legacy output.
• LNB type: Unicable + Legacy
• Number of outputs: 4 (3x Unicable II + 1x Legacy)
• Gain min. 55 dB
• Bracket diameter 40 mm
• Number of outputs: 4 (3x Unicable II + 1x Legacy)
• Gain min. 55 dB
• Bracket diameter 40 mm
LNB with 2-year manufacturer warranty. Noise figure: 0.2 dB.
• Renowned brand
• Solid construction and good parameters
• Gain: 60 dB
• Noise figure: 0.2 dB
• Solid construction and good parameters
• Gain: 60 dB
• Noise figure: 0.2 dB
Universal QUAD LNB, HDTV DVB-S2 compliant, noise figure 0.3 dB, with 36-month manufacturer's warranty.
• Popular LNB from renown manufacturer
• 4 outputs for 4 receivers
• Suitable for connecting 2 PVR receivers
• 0.3 dB noise figure
• 40 mm neck diameter
• 4 outputs for 4 receivers
• Suitable for connecting 2 PVR receivers
• 0.3 dB noise figure
• 40 mm neck diameter
This twin LNB provides signals from two close satellites (e.g. Astra and Hotbird) for two independent sat receivers (or a dual-tuner PVR).
• High quality TWIN Monoblock LNB
• Designed for reception of channels from Hotbird and Astra
• Direct connection of two satellite receivers (or a dual-tuner PVR)
• Noise figure: 0.2 dB
• Compliant with 23 mm or 40 mm mounts
• Designed for reception of channels from Hotbird and Astra
• Direct connection of two satellite receivers (or a dual-tuner PVR)
• Noise figure: 0.2 dB
• Compliant with 23 mm or 40 mm mounts
LNB allows to receive both Astra and HotBird satellites signals.
• High class monoblock LNB for Hotbird and Astra
• Neck diameter: 40 mm
• Noise figure: 0.2 dB
• Neck diameter: 40 mm
• Noise figure: 0.2 dB
This TWIN LNB is designed for operation with two single receivers or one double (two-tuner) receiver. Noise figure: 0.3 dB.
• Renowned brand of LNBs
• Good signal quality and high stability
• 60 dB gain
• Noise figure of 0.3 dB
• Good signal quality and high stability
• 60 dB gain
• Noise figure of 0.3 dB
Quatro LNB dedicated for multiswitch systems. Noise figure: 0.3 dB
• LNB type: QUATRO
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
• Number of outputs: 4
• 55 dB gain
• Designed for multiswitch systems
• Holder diameter 40 mm
This multiple converter is designed for small SMATV installations, with one satellite dish e.g. A9652. The device eliminates the need of employing multiswitches in such installations. Eight satellite receivers can be directly connected to the LNB. The converter is not designed to be employed in dou...
• LNB type: OCTO
• Number of outputs: 8
• Gain: 55 dB
• Nech diameter: 40 mm
• Number of outputs: 8
• Gain: 55 dB
• Nech diameter: 40 mm
The OCTO TOO 001 Triax LNB is a device that enables the reception of satellite signals. It has eight fullband outputs.
• LNB type: OCTO
• Number of outputs: 8
• 62 dB gain
• Diameter of the holder 40 mm
• Number of outputs: 8
• 62 dB gain
• Diameter of the holder 40 mm
IDLB-TWNL40-ULTRA-OPP A98265 fullband twin LNB (with two independent outputs) is designed for operation with two single receivers or one double (two-tuner) receiver.
• Type: TWIN
• No. of outputs: 2
• Gain 62 dB
• Mount diameter 40 mm
• No. of outputs: 2
• Gain 62 dB
• Mount diameter 40 mm
The QUATRO INVERTO LNB is designed for operation in multiswitch systems (with one output for each band/polarization pair).
• LNB type: QUATRO
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Premium class LNB
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Premium class LNB
IDLB-QUTL40-ULTRA-OPP A98267 fullband quad LNB (with four independent outputs) is designed for operation with four single receivers, two double (two-tuner) receivers, or three single receivers and one double receiver.
Made of durable and UV-resistant materials, the cover protects the converter from rain, snow, ice, dust and other contaminants.
• Easy installation
• The overall dimension of the plexiglass: 395 × 251 × 1 mm
• Suitable for three LNBs
• Universal application for all mounts
• Resistant to temperature changes
• Protects against direct exposure to rain, snow and UV rays
• The overall dimension of the plexiglass: 395 × 251 × 1 mm
• Suitable for three LNBs
• Universal application for all mounts
• Resistant to temperature changes
• Protects against direct exposure to rain, snow and UV rays
TRIAX TSI 006 A9852 is a single universal LNB with one fullband output, dedicated for operation with single-tuner satellite receivers.
The TRIAX TTW 006 A9854 TWIN LNB is designed for operation with two single satellite receivers or one twin receiver. The LNB has two independent fullband outputs.
• For two single SAT receivers or one twin tuner PVR receiver
• High parameters and solid construction
• Gain of 64 dB
• Noise figure of 0.3 dB
• Perfect for Triax dishes
• High parameters and solid construction
• Gain of 64 dB
• Noise figure of 0.3 dB
• Perfect for Triax dishes
The TRIAX TQT 006 A9856 QUAD LNB is designed for operation with four single satellite receivers or two twin receivers. The LNB has four independent fullband outputs.
• Dedicated for applications with four satellite receivers
• Optionally can provide signals to two dual/twin tuner PVR receivers
• Noise figure: 0.3 dB
• Good cooperation with Triax dishes
• Optionally can provide signals to two dual/twin tuner PVR receivers
• Noise figure: 0.3 dB
• Good cooperation with Triax dishes
The QUATRO TRIAX TQT 006 LNB is designed for operation in multiswitch systems (with one output for each band/polarization pair). Color markings are used for easier identification.
• LNB type: QUATRO
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
• Number of outputs: 4
• Designed for multiswitch systems
• 62 dB gain
• Holder diameter 40 mm
The optical kit RF/SAT OTX 1310 KIT TRIAX enables the user to distribute DVB-S/S2 satellite signals, digital terrestrial TV (DVB-T2), DAB radio and FM radio via fiber optic cables.
• Fiber optic cabling
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
• One fiber optic cable instead of 5 or 9 cable bus
• Wideband LNB dedicated for satellite installation
Fte eXcellento SINGLE LNB A9861 is a single universal LNB with one fullband output, dedicated for operation with single-tuner satellite receivers.
Very low noise figure (< 0.1 dB) allows for good reception in unfavorable conditions.
Fte eXcellento TWIN LNB A9863 is designed for operation with two single receivers or one double (twin-tuner) receiver. The LNB has two independent fullband outputs.
Fte eXcellento QUATRO LNB A9864 is designed for operation in multiswitch systems (four outputs with different polarization/band combinations). Color markings are used for easier identification.
• New! - Quatro LNB from renown Fte maximal company
• Designed for multiswitch systems
• Good match all dishes sold by DIPOL
• Max gain of 65 dB
• Very low noise figure (< 0.1 dB)
• Connectors protected with sliding cover
• Designed for multiswitch systems
• Good match all dishes sold by DIPOL
• Max gain of 65 dB
• Very low noise figure (< 0.1 dB)
• Connectors protected with sliding cover
Fte eXcellento QUAD LNB A9865 is designed for operation with four single receivers or two double (twin-tuner) receivers. The LNB has four independent fullband outputs.
Very low noise figure (< 0.1 dB) allows for good reception in unfavorable conditions.
Fte eXcellento PREMIUM OCTO FT A9866 is designed for operation with eight single receivers or four double (twin-tuner) receivers. The LNB has eight independent fullband outputs.
The receiver/converter has been designed to replicate satellite IF, DVB-T and FM/DAB signals coming in optical form via a passive optical network.
• Conversion of SAT+DVB-T optical signal into electrical (RF) form
• Dedicated for multiswitch systems, including large ones
• High sensitivity of optical input
• High level of RF signals
• Dedicated for multiswitch systems, including large ones
• High sensitivity of optical input
• High level of RF signals
The receiver/converter has been designed to replicate satellite IF, DVB-T and FM/DAB signals coming in optical via a passive optical network.
• Conversion of SAT+DVB-T optical signal into electrical (RF) form
• Outputs for direct connection with end users' outlets
• High sensitivity of optical input
• High level of RF signals
• Outputs for direct connection with end users' outlets
• High sensitivity of optical input
• High level of RF signals
FOS 102 E optical splitter is an element used to divide the optical signal into 2 paths.
• Dividing the signal into 2 paths
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
• FC/PC sockets
• Box type housing
• Attenuation of 3.9 dB
FOS 104 E optical splitter is an element used to divide the optical signal into 4 paths.
• Dividing the signal into 4 paths
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
• FC/PC sockets
• Box type housing
• Attenuation of 7.4 dB
FOS 108 E optical splitter is an element used to divide the optical signal into 8 paths.
• Dividing the signal into 8 paths
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
• FC/PC sockets
• Box type housing
• Attenuation of 10.8 dB
An LNB holder dedicated for Corab dishes
Second LNB bracket (for 80, 100, 110 cm FAMAVAL dishes).
Clamping ring fits Famaval satellite dishes.
• DVB-T2 standard terrestrial TV reception
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
• HEVC (H.265 /MPEG-H) encoding support
• Reception of audio in MPEG-2 Audio and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function – turning on the tuner turns on the TV and vice versa (when using AC power)
• Program list copying
• Power supply from TV USB port or 5V power adapter
• Universal, learning remote control
• Semi-Twin Tuner – it is possible to record one channel and watch another at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of high definition channels (High Definition)
• Programmable timer support
• Teletext and subtitle support
• Logical Channel Number (LCN) support
• Possibility to manually change the order of programs and numbering
• Teletext and subtitle support
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB- head
• Low heat emission
Signal T2-BOX receiver receives free DVB-T2 digital terrestrial TV channels broadcast in HEVC (H.265/MPEG-H) and H.264/MPEG-4 video coding technology with Dolby E-AC-3 audio.
• Fulfills the requirements of the Regulation of the Ministry of Digitization
• Reception of terrestrial TV in DVB-T2 standard
• Support of HEVC encoding (H.265 /MPEG-H)
• Reception of audio in MPEG-2 and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function - turning on the receiver starts the TV and vice versa
• Program list copying
• Universal learning remote control
• Semi-Twin Tuner - it is possible to record one channel and watch another channel at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of HD channels
• Programmable timers
• Support for teletext and on-screen subtitles
• Logical Channel Number (LCN) support
• Possible to manually change the order of programs and their numbering
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB-T2 head unit.
• Low heat emission
• Reception of terrestrial TV in DVB-T2 standard
• Support of HEVC encoding (H.265 /MPEG-H)
• Reception of audio in MPEG-2 and Dolby E-AC-3 standard
• Hotel mode
• HDMI CEC function - turning on the receiver starts the TV and vice versa
• Program list copying
• Universal learning remote control
• Semi-Twin Tuner - it is possible to record one channel and watch another channel at the same time, provided they are on the same multiplex
• Multilingual menu: Polish, English, German, Czech, Hungarian, Slovak, Croatian, Portuguese, Italian
• Reception of HD channels
• Programmable timers
• Support for teletext and on-screen subtitles
• Logical Channel Number (LCN) support
• Possible to manually change the order of programs and their numbering
• Electronic Program Guide (EPG)
• PVR Ready function
• TimeShift
• Multimedia player
• Very high sensitivity DVB-T2 head unit.
• Low heat emission
Ferguson Ariva T75 is a universal terrestrial television DVB-T/T2 television receiver.
• Fully compatible with DVB-T2 digital standard
• Fully compatible with HEVC/H.264/MPEG-4/AVS high definition digital TV
• HDMI 1.3 connector
• 2 USB ports enabling Timeshift and PVR functions
• Bluetooth remote control
• Fully compatible with HEVC/H.264/MPEG-4/AVS high definition digital TV
• HDMI 1.3 connector
• 2 USB ports enabling Timeshift and PVR functions
• Bluetooth remote control
Power adapter with 5 VDC voltage and 2 A current output, equipped with USB type A connector.
• Output voltage 5 VDC
• Output current 2A
• USB type A port
• Color: black
• Output current 2A
• USB type A port
• Color: black
Remote control for DVB-T2 receivers: Signal T2-MINI and Signal T2-BOX. It allows simultaneous control of a receiver and TV set (after a simple procedure of programming the remote control).
• Universal learning remote control
• Compatible with Signal T2-MINI and Signal T2-BOX receivers
• Power supply: 2x 1.5 V AAA
• Compatible with Signal T2-MINI and Signal T2-BOX receivers
• Power supply: 2x 1.5 V AAA
Opticum HD AX150 is a DVB-S/S2 digital satellite TV receiver, allowing you to receive free, free-to-air FTA channels.
• Supports SD/HD (MPEG2/MPEG4 H.264), DVB-S/S2 systems
• Reception of free, FTA channels
• Low power consumption in standby mode, below 1W
• Automatic entry into standby mode after 3 hours
• Supports DiSEqC 1.0, 1.1, 1.2 and USALS systems
• Electronic program guide – EPG
• Multilingual on-screen menus
• Reception of free, FTA channels
• Low power consumption in standby mode, below 1W
• Automatic entry into standby mode after 3 hours
• Supports DiSEqC 1.0, 1.1, 1.2 and USALS systems
• Electronic program guide – EPG
• Multilingual on-screen menus
AWS-1036 (1 input) is designed for MATV installations. The device has four outputs with independent level controls.
• Inputs: 1: 47-862 MHz
• No. of outpus: 4
• Max. amplification: 23 dB
• Max. output level: 100 dBμV
• Amplification adjustment range: 14 dB
• Antenna preamplifier power supply possible
• No. of outpus: 4
• Max. amplification: 23 dB
• Max. output level: 100 dBμV
• Amplification adjustment range: 14 dB
• Antenna preamplifier power supply possible
The RF amplifier AWS-1141 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one ...
• Inputs: 1: 47-790MHz
• Number of outputs: 1
• Max. gain: 21 dB
• Max output signal level: 106 dBμV
• Gain regulation: 10 dB
• Power supply for preamplifier
• Number of outputs: 1
• Max. gain: 21 dB
• Max output signal level: 106 dBμV
• Gain regulation: 10 dB
• Power supply for preamplifier
The AWS-1142 (1 input, 2 outputs) is designed for TV systems. The device can supply 12 VDC preamplifiers.
• Inputs: 1: 47-862 MHz
• Number of outputs: 2
• Maximum gain: 19 dB
• Maximum output level: 104 dBμV
• Gain adjustment range: 10 dB
• Possibility to power an antenna preamplifier
• Number of outputs: 2
• Maximum gain: 19 dB
• Maximum output level: 104 dBμV
• Gain adjustment range: 10 dB
• Possibility to power an antenna preamplifier
The RF amplifier AWS-1143 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one ...
• Inputs: 1: 87-790 MHz
• Number of outputs: 3
• Max. gain: 19 dB
• Max. output level power: 104 dBμV
• Gain adjustment: 10 dB
• Preamplifier power supply
• Number of outputs: 3
• Max. gain: 19 dB
• Max. output level power: 104 dBμV
• Gain adjustment: 10 dB
• Preamplifier power supply
The RF amplifier AWS-1144 has been designed for applications in individual and community antenna installations. The former use requires to employ an antenna branch filter/diplexer to combine the received channels. The amplifier can pass supplying voltage (12V) to preamplifiers. For this purpose one ...
• Inputs: 1: 47-862 MHz
• Number of outputs: 4
• Max. gain: 15 dB
• Max output signal level: 100 dBμV
• Gain regulation: 10 dB
• Power supply for preamplifier
• Number of outputs: 4
• Max. gain: 15 dB
• Max output signal level: 100 dBμV
• Gain regulation: 10 dB
• Power supply for preamplifier
RF amplifier for home TV antenna installations. It can provide +12 V power to a preamplifier installed near the antenna. The 12V/100 mA (output) stabilized power supply is included in the set. The amplifier can also be fed through its output. It is possible when connecting another power supply with ...
Amplifier for home TV installation. The amplifier can provide +12 V power to preamplifier installed near the antenna. The 12V/100mA (output) stabilized power supply is included in the set. The amplifier can also be fed through one of its outputs (this one marked with [DC]). It is possible when conne...
• Inputs:: 1: 47-790 MHz
• Number of outputs: 2
• Maximum gain: 20 dB
• Maximum level of output signal: 101 dBμV
• Gain regulation: 15 dB
• Preamplifier supply
• Number of outputs: 2
• Maximum gain: 20 dB
• Maximum level of output signal: 101 dBμV
• Gain regulation: 15 dB
• Preamplifier supply
Broadband amplifier for home TV installations (also for distributing cable TV to multiple receivers). The amplifier can provide +12VDC voltage to a preamplifier installed on/near the antenna. 12V/120mA (output) stabilized power supply is included in the set. The amplifier can also be fed through one...
• Inputs: 1: 47-862 MHz
• Number of outputs: 3
• Max. gain: 20 dB
• Max. output signal level: 103 dBμV
• Gain. adjustment: 15 dB
• Power supply for antenna preamplifier
• Number of outputs: 3
• Max. gain: 20 dB
• Max. output signal level: 103 dBμV
• Gain. adjustment: 15 dB
• Power supply for antenna preamplifier
It is one-input, four-output antenna amplifier for small TV installations. The12V/100mA (output) stabilized power supply is included in the set. The amplifier has switch allowing to provide +12 V power to preamplifier installed near the antenna. It can be also fed through one of the outputs (via coa...
• Inputs: 1: 87-774MHz
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
• Number of outputs: 4
• Maximum gain: 17 dB
• Maximum output level: 100 dBμV
• Gain adjustment range: 14 dB
• Possibility to power an antenna preamplifier
The broadband amplifier AWS-1241 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To us...
The broadband amplifier AWS-1242 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To us...
The broadband amplifier AWS-1243 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To us...
The broadband amplifier AWS-1244 has been designed for use in TV/FM antenna installations in homes and buildings. In the case of individual installations, the signals from band antennas have to be first combined in a diplexer. The amplifier passes DC voltage (12V) for supplying preamplifier/s. To us...
This multiplexer is used for splitting signal among multiple TV receivers. It is advised to use the device if a passive splitter lowers the signal to an unacceptable level. The device has four outputs. A power supply is not included. The splitter is to be powered through the No. 4 output ...
Active DVB-T splitter R14R B1225 is used for distribution of terrestrial DVB-T and DAB/DAB+/FM radio signals within 47-860 MHz band. The four output paths are isolated. The input signal level from an antenna should not exceed 95 dBμV (passive antennas usually provide signals at levels 60...75 dBμV).
• Splits antenna signal into 4 isolated paths
• Independent gain adjustment ( 2...12 dB) in each path
• Frequency range covers UHF, VHF and FM bands; out-of-band signals (CB, GSM,LTE) are filtered
• Powered through output 1 ( 12 VDC / 100 mA), auto power supply for an antenna preamplifier
• Weatherproof casing
• Independent gain adjustment ( 2...12 dB) in each path
• Frequency range covers UHF, VHF and FM bands; out-of-band signals (CB, GSM,LTE) are filtered
• Powered through output 1 ( 12 VDC / 100 mA), auto power supply for an antenna preamplifier
• Weatherproof casing
The amplifier is designed for amplification of low FM/DAB+/DVB-T signals broadcast within 87-230 MHz range. The device is suitable for outdoor use. The B4003 amplifier has input and output impedance of 75 ohm, which means that antennas with 300 ohm impedance have to be equipped with a matching trans...
• Suitable for outdoor use
• Number of inputs: 1
• Number of outputs: 1
• Band: 87 - 230 MHz
• Gain: 25 dB
• Max. signal output level: 97 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Band: 87 - 230 MHz
• Gain: 25 dB
• Max. signal output level: 97 dBμV
LNA-169-5G 24 dB box antenna amplifier is designed to receive DVB-T2 digital terrestrial television signal.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 24 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 24 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
LNA-177-5G 27 dB box antenna amplifier is designed to receive DVB-T2 digital terrestrial television signal.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 27 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 27 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
LNA-188-5G 32 dB box antenna amplifier is designed to receive DVB-T2 digital terrestrial television signal.
• Suitable for all antennas manufactured by DIPOL
• Operating band: 174 - 694 MHz
• Max. gain: 32 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
• Operating band: 174 - 694 MHz
• Max. gain: 32 dB
• High resistance to interfering signals: FM radio, CB, GSM telephony, LTE800, GSM900, Wi-Fi, Bluetooth, LTE
This shielded broadband amplifier (CE certified) is usually used as preamplifier in antenna systems, often with broadband antennas.
In the case of using 300-ohm antennas there will be needed matching transformer between the antenna and amplifier.
• Small-size broadband antenna amplifier for indoor and outdoor use
• Frequency range from VHF to UHF
• Max gain of 28
• Maximum output level of 100 dBμV
• Frequency range from VHF to UHF
• Max gain of 28
• Maximum output level of 100 dBμV
The amplifier is designed for terrestrial TV signal amplification. It is highly recommended for use with broadband antennas. The amplifier's input and output impedance equals to 75ohm, therefore for antennas of 300ohm impedance a matching transformer must be used, e.g. C0005. The amplifier is CE cer...
The preamplifier is designed for amplification of terrestrial TV signals. It is highly recommended for use with broadband antennas. The input and output impedance is 75 ohm - it means that antennas having 300 ohm impedance have to be equipped with a matching transformer e.g. C0005. The amplifier is ...
The APL-104 amplifier is designed to amplify weak FM/DAB+ and DVB-T/T2 signals. Gain of 18...23 dB. Powered with 12 V DC.
• Can be mounted outdoors.
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 87-790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 95 dBμV
• Number of inputs: 1
• Number of outputs: 1
• Operating band: 87-790 MHz
• Maximum gain: 23 dB
• Maximum output signal level: 95 dBμV
The preamplifier is designed for amplification of weak FM/DAB+ and DVB-T signals within 87-790 MHz frequency range. It can be used outdoors. The input and output impedance is 75 ohm - it means that antennas having 300 ohm impedance have to be equipped with a matching transformer e.g. C0001. The amp...
• New! - small-size broadband antenna amplifier for indoor and outdoor use
• Frequency range from FM radio to UHF
• Max gain of 28
• Maximum output level of 96 dBμV
• 2 connector protectors included
• Frequency range from FM radio to UHF
• Max gain of 28
• Maximum output level of 96 dBμV
• 2 connector protectors included
The amplifier can improve FM reception in low-signal areas. It is an ideal device for cooperation with majority of the offered FM antennas. 75 ohm input/output impedance, compliance with CE standards.
The PR-310 amplifier is used to amplify RF/SAT signals in the 5 - 2400 MHz band.
• Gain 10 dB
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
• It amplifies all bands: FM/DAB+, DVB-T2, DVB-S/S2
• Frequency range 5-2400 MHz
• DC pass-through 13 V/18 V 500 mA
A typical antenna has symmetrical output of 300 ohm impedance, while coaxial cable is unsymmetrical load of 75 ohm impedance. This is why an impedance transformer must be used. The antenna impedance transformer is passive RF device which both transforms the impedance and adjusts the output to standa...
A typical antenna has a balanced output with 300 ohm impedance, while a coaxial cable is an unbalanced load with 75 ohm impedance. So, an impedance transformer (often called balun) must be used. A balun is a passive device which uses a transformer to change the impedance and character of the output ...
Antenna balun C0003, channels 6-48
• Input channels 6-48
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
• Input impedance: 300Ω
• Output impedance: 75Ω
• Attenuation < 1.5 dB
A typical antenna has a balanced output of 300 Ohm impedance ratio, while a coaxial cable is an imbalanced load of 75 Ohm impedance. This is why an indirect connection must be created to fit an antenna with a coaxial cable: an impedance transformer must be used. An impedance transformer is a passive...
Antenna impedance transformer C0006, channels 21-48, F-connector
• Input channels 21-48
• Input impedance: 300 Ohm
• Output impedance: 75 Ohm
• Attenuation < 1.5 dB
• F connector
• Input impedance: 300 Ohm
• Output impedance: 75 Ohm
• Attenuation < 1.5 dB
• F connector
DC015T antenna diplexer that sums signals from three antennas – signals from FM+VHFI/II band (47-108 MHz), VHFIII (174-230 MHz) and UHF band (470-694 MHz).
• The diplexer enables summing of FM+VHFI/II band (47-108 MHz), VHFIII(174-230 MHz) and UHF band (470-694 MHz) signals
• It is mounted on the antenna tower, near the antenna set
• Die-cast housing inside a compact plastic case
• It is mounted on the antenna tower, near the antenna set
• Die-cast housing inside a compact plastic case
Telmor ZWR-210DC C0325 is a masthead diplexer used for combining signals from two antennas, FM/VHF (5-230 MHz) and UHF (470-790 MHz). With the splash-proof box, it can be placed close to the antennas, directly on the antenna mast.
• New! UHF/VHF diplexer for DVB-T
• Shielding casing
• Independent DC pass options for VHF and UHF antennas (12 VDC / 100 mA)
• Insertion loss: 1 dB
• Mounted on a mast in the included splash-proof box
• Shielding casing
• Independent DC pass options for VHF and UHF antennas (12 VDC / 100 mA)
• Insertion loss: 1 dB
• Mounted on a mast in the included splash-proof box
Outdoor three-input antenna branching filter, used as triplexer for combining signals from three antennas, installed on the mast carrying the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. Simple installation thanks to convenient plastic tie...
• Combining signals from three antennas
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering a preamplifier in UHF path
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering a preamplifier in UHF path
The ZA-204Ms C0342 triplexer is used for combining signals from three antennas: FM (87-110 MHz), VHF (174-230 MHz) and UHF (471-694 MHz), and is installed on the same mast that carries the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. A con...
• FM, VHF and UHF inputs
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in all paths, with auto-detection
• Shielding of the circuitry
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in all paths, with auto-detection
The ZA-106AMs C0345 masthead diplexer/combiner combines signals from an FM antenna (87-110 MHz) and a DVB-T antenna (174-230 MHz and 471-694 MHz). The housing of the diplexer has been specially prepared for outdoor operation and can be easily installed on a mast, with the included band clip.
• Inputs: FM, VHF/UHF
• Attenuation: 1 dB
• DC pass in VHF/UHF path (max. 24 V / 250 mA)
• Shielded body
• Mast-mounted, with band clip
• Type F connectors
• Attenuation: 1 dB
• DC pass in VHF/UHF path (max. 24 V / 250 mA)
• Shielded body
• Mast-mounted, with band clip
• Type F connectors
The ZA-112Ms antenna diplexer (3 inputs) is used as a combining element for VHF, UHF1 (max. 24 VDC/0,2 A), UHF2.
• Inputs: VHF, UHF1, UHF2
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors.
• Attenuation: 1 dB
• Current pass in UHF1 path (max. DC 24 V/200 mA)
• Shielded housing
• Mast mounting with cable tie
• F type connectors.
The ZA-106Ms C0373 diplexer is used for combining signals from two antennas, VHF (87-230 MHz) and UHF (471-694 MHz), and is installed on the same mast that carries the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. A convenient and simple in...
• Inputs: VHF, UHF
• Insertion loss: 1 dB
• Option for powering a preamplifier in UHF path (max. 24V/250mA)
• Shileded housing
• Easily-mountable on a mast, with plastic tie
• F connectors
• Insertion loss: 1 dB
• Option for powering a preamplifier in UHF path (max. 24V/250mA)
• Shileded housing
• Easily-mountable on a mast, with plastic tie
• F connectors
The ZA-206Ms C0374 diplexer is used for combining signals from two antennas, VHF (87-230 MHz) and UHF (471-694 MHz), and is installed on the same mast that carries the antenna set. The construction of the casing prevents rain water from getting to the inside of the device. A convenient and simple in...
• New! Diplexer for combining DVB-T and DAB signals from VHF and UHF antennas
• Shielding of the circuitry
• LTE filter (> 700 MHz)
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in both paths, with auto-detection
• Shielding of the circuitry
• LTE filter (> 700 MHz)
• Rubber caps for protecting F connectors
• Easily-mountable on a mast, with plastic tie
• Option for powering preamplifiers in both paths, with auto-detection
The AZS-02 separator supplies DC power to antenna amplifier/s in situations when it is not possible using a typical power supply with a built-in DC injector.
• Bandwidth: 5 - 1000 MHz
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
• Maximum voltage value: 24 V
• Maximum current value: 300 mA
• 3.5 mm JACK socket
The ZA-F10 VHF + UHF C0410 antenna diplexer is designed to combine signals from an FM/VHF (5-230 MHz) and UHF (470-790 MHz) antennas. The PCB with built-in balun is to be directly mounted in the box of a VHF antenna. The UHF DC connector should be connected with a UHF antenna. It can transmit 12 VDC...
• Mounted directly in VHF antenna box
• 12 VDC pass-through between the output and UHF antenna connector (max 100 mA)
• Insertion loss: 1.5 dB
• Attenuates LTE signals
• 12 VDC pass-through between the output and UHF antenna connector (max 100 mA)
• Insertion loss: 1.5 dB
• Attenuates LTE signals
Operation band of 5-862 MHz, insertion loss of 4 dB, in/out impedance of 75 ohm. Based on RF decoupling transformer, the device allows for connecting two antennas, even from the same band, to one receiver. It can also be used to connect two receivers to one antenna lead...
5-862 MHz band, 17 dB rejection loss. 4dB through loss, 75 Ohm in/out impedance. Allows to connect multiple receivers to a single antenna. Can also be used as an antenna adder. Built on an un-coupling transformer. Input, output - F-type plugs. Can be installed on a mast. Direct current flow possibil...
This power supply unit is designed to supply 12 VDC to terrestrial TV antenna amplifiers and preamplifiers with a current draw of up to 100 mA.
• Type: switched-mode
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
• Input voltage: AC 100-230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 100 mA
• TV output: IEC plug
The power supply is designed to provide power to preamplifiers/amplifiers in small terrestrial antenna systems (requiring 12 VDC, with current consumption up to 100 mA).
• For 12 VDC antenna amplifiers/preamplifiers
• Maximum output current 100 mA
• Based on AC transformer, aux. 13 VAC output
• LED indication of the output voltage
• DC injector / RF separator with IEC antenna plug
• Made in Poland
• Maximum output current 100 mA
• Based on AC transformer, aux. 13 VAC output
• LED indication of the output voltage
• DC injector / RF separator with IEC antenna plug
• Made in Poland
The power supply is designed to provide power to preamplifiers/amplifiers in small terrestrial antenna systems (requiring 12 VDC, with current consumption up to 100 mA).
• Type: transformer-based
• Input voltage: 230 VAC, 50 Hz
• Output voltage: 12VDC
• Max. output current: 100 mA
• Ability to power AC 13 V/20 mA devices
• TV output: IEC plug
• Cable connection: F-type connector
• Input voltage: 230 VAC, 50 Hz
• Output voltage: 12VDC
• Max. output current: 100 mA
• Ability to power AC 13 V/20 mA devices
• TV output: IEC plug
• Cable connection: F-type connector
Switched-mode power supply used to power antenna amplifiers via power separators.
• Type: switched-mode
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• Input voltage: AC 100...230 V 50/60 Hz
• Output voltage: DC 12 V
• Max. output current: 300 mA
• Lenght: 3 m
• IEC male - IEC female
• Angular type connectors
• IEC male - IEC female
• Angular type connectors
Cable length: 1.5 m. The patch cable is suitable for both home and professional RF installations, for example, to connect components of a headend.
Cable length: 3 m. The patch cable is suitable for both home and professional RF installations, for example, to connect components of a headend.
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1005_100+.jpg/3485ddf65185708132bcd177ab8bdd94.jpg)
TRISET 302 Eca Tri-shield type in PVC jacket intended for the construction of TV/SAT systems. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• PVC jacket
• Low attenuation
• Excellent matching
• High screening efficiency – in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• PVC jacket
• Low attenuation
• Excellent matching
• High screening efficiency – in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipol.com.pl/img/thumbnails/e1005_250+.jpg/f551947d3c11807563d82b17a636d7cd.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Eca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1005_500+.jpg/2c64860f51cff4dcded36ce1f3dbeaeb.jpg)
TRISET 302 Eca Tri-shield type made in PVC jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Eca.
• Compliant with class A+ standard
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Eca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PVC jacket
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Dca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1006_500+.jpg/e99b5303bd58db2e71d6f663ec303518.jpg)
TRISET 302 Dca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - Dca-s2, d1, a1.
• Compliant with the class A+ standard
• Flammability class Dca-s2, d1, a1
• Compliant with the requirements of the MTBiGM regulation
• 1.02mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class Dca-s2, d1, a1
• Compliant with the requirements of the MTBiGM regulation
• 1.02mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 B2ca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1007_500+.jpg/dbcf7cbabe1881edb010590046b3e334.jpg)
TRISET 302 B2ca, Tri-shield type, made with LSZH jacket, intended for the construction of RTV/SAT installations. Reaction to fire class according to CPR - B2ca-s1a, d1, a1.
• Compliant with the class A+ standard
• Flammability class B2ca-s1a, d1, a1
• Compliant with the requirements of the MTBiGM regulation
• 1.02mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
• Flammability class B2ca-s1a, d1, a1
• Compliant with the requirements of the MTBiGM regulation
• 1.02mm copper core
• Cable with tri-shield construction - triple screen
• Made in LSZH (LS0H) jacket - halogen-free insulation
• Low attenuation
• Excellent fit
• High shielding effectiveness - in the frequency band up to 2 GHz it meets the requirement of class A++
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [100 m]](https://www.dipol.com.pl/img/thumbnails/e1008_100+.jpg/b86956f9c39f6480aa44d79932f2a4a2.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [250 m]](https://www.dipol.com.pl/img/thumbnails/e1008_250+.jpg/753ed42ed78da9dd670a0377e49b1f70.jpg)
TRISET 302 Fca Tri-shield type, external made in PE jacket intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial cable 75 Ohm TRISET 302 Fca class A+ 1.02/4.6/7.0 110 dB [500 m]](https://www.dipol.com.pl/img/thumbnails/e1008_500+.jpg/8bce782df80cc7d49b4dcb3f97ca1df6.jpg)
TRISET 302 Fca Tri-shield type, external made in PE casing intended for the construction of RTV/SAT installations. Fire reaction class in accordance with CPR - Fca.
• Compliant with class A+ standard
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
• Flammability class Fca
• Copper core 1.02 mm
• Tri-shield cable - triple screen
• Made in PE jacket
• External cable
• Low attenuation
• Excellent fit
• High screening efficiency - in the frequency band up to 2 GHz meets the class A++ requirement
• Min. 77% braid coverage
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [1m]](https://www.dipol.pt/img/thumbnails/e1015+++.jpg/0d08ac94851f35a0e1e5b02f5f7afe44.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems.
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• Sold per meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 [100m]](https://www.dipol.com.pl/img/thumbnails/e1015_100+.jpg/2e94b5d9ca3b921cde798644fb9d48d5.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems.
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [200m]](https://www.dipol.sk/img/thumbnails/e1015_200+.jpg/7d2b29aae19d7398dd79d3c23fff19fe.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems.
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 1.13/4.8/6.8 100 dB [500m]](https://www.dipol.com.pl/img/thumbnails/e1015_500+.jpg/5cbcfe3443448c1c49311d7f0f0c1713.jpg)
TRISET-113 (internal) double shielded RG6 type coaxial cable has the inner conductor made of 1.13 mm diameter copper wire.
• Designed for all kinds of systems, particularly for terrestrial and satellite TV systems.
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
• PVC sheath - inner cable
• Screening class: A
• Copper core 1,13 mm.
• Aluminum braid 81%.
• Double screen: foil/sheath
• CPR Class: Eca
• 500 meters
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [100m]](https://www.dipol.sk/img/thumbnails/e1016_100+.jpg/2eedcd00a5cb9c30d78c338d11e8dae0.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• Complies with A+ class requirements
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
• Reaction to fire class compliant with CPR - Dca-s2, d1, a1
• Triple shield Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• Passed IEC 68-2-3 Steady State Damp Heat test
• 1.13mm copper core
• Low loss
• Excellent impedance matching
• High screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty
![Coaxial cable (75 ohm, class A+): TRISET PLUS Dca LSZH<br>1,13/4,8/6,8 110 dB [500m]](https://www.dipol.com.pl/img/thumbnails/e1016_500+.jpg/99096c8956274c118003137e395dd9ab.jpg)
High quality TRISET PLUS coaxial cable is dedicated for individual and community antenna systems. Complies with A+ class requirements.
• complies with +++A++++ class requirements
• +++reaction to fire class compliant with CPR - Dca-s2, d1, a1+++
• +++LSZH (LS0H) - halogen-free+++ sheath
• +++triple shield+++ Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• passed IEC 68-2-3 Steady State Damp Heat test
• 1.13mm copper core
• low loss
• excellent impedance matching
• high screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty.
• +++reaction to fire class compliant with CPR - Dca-s2, d1, a1+++
• +++LSZH (LS0H) - halogen-free+++ sheath
• +++triple shield+++ Al/PET/SY foil (first) bonded to the dielectric + 81% density braid + Al/PET foil (second) bonded to the sheath
• passed IEC 68-2-3 Steady State Damp Heat test
• 1.13mm copper core
• low loss
• excellent impedance matching
• high screening efficiency - meeting the class A++ requirements in most of the range
• 81% braid coverage
• 5-year warranty.
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca [1m]](https://www.dipol.pt/img/thumbnails/e1017+++++.jpg/782994682fbddbafd1bb9347813dd94e.jpg)
High-quality TV/satellite coax (A-class, 16.65dB/100m at 860 MHz) in PE sheath, gel-filled. For outdoor applications.
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [100m]](https://www.dipol.com.pl/img/thumbnails/e1017_100+.jpg/c61841699c220bcc8e47b237c6988d24.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core
made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 100 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [200m]](https://www.dipolnet.com/img/thumbnails/e1017_200+.jpg/c9c81b6521075a285f88726b86d7ebb1.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core
made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 200 meters
![Coaxial Cable (75 ohm, class A): TRISET-113 PE (gel-filled) Fca 1,13/4,8/6,8 100 dB [500m]](https://www.dipol.com.pl/img/thumbnails/e1017_500+.jpg/be4b32041c6ba5e4995497236dd2560c.jpg)
TRISET-113 PE (outdoor) double-shielded RG6 type coaxial cable has the core
made of copper wire with a diameter of 1.13 mm.
• Designed for all types of systems, particularly for terrestrial and satellite TV systems
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
• PE-coated outdoor cable
• Resistant to UV radiation
• Gel that prevents the spread of moisture inside
• Screening class: A
• Copper core: 1,13 mm
• Aluminum braid 81%
• Double shield: foil/braid
• CPR Class: Fca
• 500 meters
![Coaxial Cable (75 ohm, class A++): TRISET B2CA 120 dB 1.05/4.6/6.9 [1 m]](https://www.dipolnet.com/img/thumbnails/e1020_1+.jpg/fd33a05505d1af3532b6403cb0144100.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Complies with A++ class requirements
• 1.05 mm copper core
• Low loss
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH cable
• Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1
• 1.05 mm copper core
• Low loss
• High screening efficiency
• 82% braid coverage
• 10-year warranty
• LSOH cable
• Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1
![TRISET B2CA LSZH 75 ohm coaxial cable class A++ 1.05/4.6/6.9 120 dB [500m].](https://www.dipol.com.pl/img/thumbnails/e1020_500+.jpg/783223e5fce8cf9a0a929918207856a6.jpg)
TRISET B2CA is suitable for MATV/SMATV antenna systems in public buildings. Reaction to fire class acc. to CPR - B2ca-s1a,d1,a1.
• Complies with Class A++ standard
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1, 05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
• Braid coverage 82% - tinned copper
• Interference attenuation 10 dB higher than Class A+
• Copper tinned braid resistant to oxidation
• Complies with requirements of MTBiGM regulation
• Copper core 1, 05 mm
• Low attenuation
• High shielding effectiveness
• 82% braid coverage
• 10 year warranty
• SoH coated cable
• Fire response class in accordance with CPR - B2ca-s1a,d1,a1
![Coaxial Cable 75 Ohm, TriSAT B2CA LSZH-FR+ class A+ 1.00/4.6/6.9 110 dB [500m]](https://www.dipol.com.pl/img/thumbnails/e1022_500+.jpg/4ce863146cd02aff247c3ca0bbbda836.jpg)
High-quality TriSAT B2CA coaxial cable dedicated for the construction of RF/SAT systems. Cable with LSZH-FR+ sheath (halogen-free insulation).
• Conforms to Class A+ standard
• Complies with the requirements of the construction legislation
• Fire reaction class in accordance with CPR - B2ca-s1a,d1,a1
• Cable in LSZH-FR+ sheath • Copper core 1.00 mm
• Low attenuation
• Excellent fit
• High shielding efficiency
• 78% braid coverage
• 5-year warranty
• 500 m on the reel made of ABS packed into carton box
• Complies with the requirements of the construction legislation
• Fire reaction class in accordance with CPR - B2ca-s1a,d1,a1
• Cable in LSZH-FR+ sheath • Copper core 1.00 mm
• Low attenuation
• Excellent fit
• High shielding efficiency
• 78% braid coverage
• 5-year warranty
• 500 m on the reel made of ABS packed into carton box
![Coaxial Cable (75 ohm): Triset-11 PE 1.63/7.2/10.2, 100 dB (Fca, class A, gel-filled) [100m]](https://www.dipolnet.ro/img/thumbnails/e1025_100+.jpg/5529721acf4446b7459fa06d9274e37c.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Trunk cable,
• PE sheath - outdoor cable
• UV resistant
• Gel reducing the spread of moisture inside the cable
• Screening class: A
• 1.63 mm cooper core
• 86% aluminum braid coverage
• Double screening: foil/braid
• CPR class: Fca
• 100 m
• PE sheath - outdoor cable
• UV resistant
• Gel reducing the spread of moisture inside the cable
• Screening class: A
• 1.63 mm cooper core
• 86% aluminum braid coverage
• Double screening: foil/braid
• CPR class: Fca
• 100 m
![Coaxial Cable (75 ohm): Triset-11 PE 1.65/7.2/10, 100 dB (Fca, class A, gel-filled) [300m]](https://www.dipol.com.pl/img/thumbnails/e1025_300+.jpg/88c4672880815cdc20e35a3da5c0543a.jpg)
TRISET-11 PE (outdoor) double-shielded coaxial cable type RG11 with the internal conductor made of copper wire with a diameter 1.65 mm.
• Trunk cable,
• PE sheath - outdoor cable
• UV resistant
• Gel reducing the spread of moisture inside the cable
• Screening class: A
• 1.63 mm cooper core
• 86% aluminum braid coverage
• Double screening: foil/braid
• CPR class: Fca
• 300 m
• PE sheath - outdoor cable
• UV resistant
• Gel reducing the spread of moisture inside the cable
• Screening class: A
• 1.63 mm cooper core
• 86% aluminum braid coverage
• Double screening: foil/braid
• CPR class: Fca
• 300 m
![Coaxial Cable (75 ohm): TRISET-11 HF 1.65/7.2/10 [200m] (class A+, halogen-free)](https://www.dipol.com.pl/img/thumbnails/e1027_200+.jpg/94ffd0895050e944df71237466f764eb.jpg)
Due to HF (halogen free) technology, the cable is suitable for making installations in schools, hospitals etc. Screening efficiency above 100 dB allows parallel arrangement of many cables, which is indispensable in large multiswitch systems. The core of the TRISET-11 (diam. of 1.65 mm) is made of co...
![Coaxial Cable (75 ohm, class A): TRISET-11 Cca LSZH 1.63/7.2/10.2 100 dB [300m]](https://www.dipol.com.pl/img/thumbnails/e1027_300+.jpg/93c52370aa00b0dab11bf791e03341b8.jpg)
TRISET-11 HF (halogen-free insulation) dedicated to SMATV systems. It does not spread flame, smoke emission is very low and the released gases are not corrosive.
• Trunk cable,
• 1.63 mm 100% cooper core
• HF (halogen-free) sheath – does not release toxic substances while burning
• For commercial buildings
• UV resistant
• Gel reducing the spread of moisture inside the cable
• Screening class: A
• 86% aluminum braid coverage
• Double screening: foil/braid
• CPR class: Cca
• 300 m
• 1.63 mm 100% cooper core
• HF (halogen-free) sheath – does not release toxic substances while burning
• For commercial buildings
• UV resistant
• Gel reducing the spread of moisture inside the cable
• Screening class: A
• 86% aluminum braid coverage
• Double screening: foil/braid
• CPR class: Cca
• 300 m
• IEC plug with very good parameters, for everyone
• Ideal for televisions mounted on walls or outlets behind furniture
• Screening efficiency 115 dB
• Simple installation without special tools
• Ideal for televisions mounted on walls or outlets behind furniture
• Screening efficiency 115 dB
• Simple installation without special tools
The E3002 antenna plug from Cabelcon, Denmark, is intended for applications in home antenna systems. The patented design, based on "Self-Install" concept, ensures professional, durable connection. What is important, no compression tool is needed.
• "Self-Install" concept
• No need for tools
• Reusable
• Designed for cables with dielectric diameter of 4.9-5.1 mm.
• No need for tools
• Reusable
• Designed for cables with dielectric diameter of 4.9-5.1 mm.
The E3003 antenna socket from Cabelcon, Denmark, is intended for applications in home antenna systems. The patented design, based on "Self-Install" concept, ensures professional, durable connection. What is important, no compression tool is needed.
• High quality and reliability
• 3 GHz band
• Class A screening effectiveness
• No need for a compression tool
• Designed for cables with dielectric diameter of 4.9-5.1 mm
• 3 GHz band
• Class A screening effectiveness
• No need for a compression tool
• Designed for cables with dielectric diameter of 4.9-5.1 mm
• IEC socket witch good parameters ready for self-mounting
• Ideal solution when there is no space for typical connectors installation
• Screening efficiency 115 dB
• Easy installation
• No tools needed
• Ideal solution when there is no space for typical connectors installation
• Screening efficiency 115 dB
• Easy installation
• No tools needed
Professional compression antenna plug (IEC) E3005 is specially designed to the TRISET-113 cables. This monolithic connector made of nickel-plated brass is not susceptible to corrosion. The highest manufacturing precision ensures perfect appearance and quality of the connection. Proper mounting of th...
• Wide operating band (3 GHz)
• Very low loss in the whole operating band
• Simple and quick assembly: longitudinal compression
• Monolithic construction, resistance to corrosion
• Matched to the cables of TRISET-113 cable family
• Suitable for multiple connecting/disconnecting operations
• Very low loss in the whole operating band
• Simple and quick assembly: longitudinal compression
• Monolithic construction, resistance to corrosion
• Matched to the cables of TRISET-113 cable family
• Suitable for multiple connecting/disconnecting operations
Professional compression antenna socket (IEC) E3006 is specially designed for TRISET-113 cables. This monolithic connector made of nickel-plated brass is not susceptible to corrosion. The highest manufacturing precision ensures perfect appearance and quality of the connection. Proper mounting of the...
• wide operating band (3 GHz)
• very low loss in the whole operating band
• perfect matching to the transmission line within the whole operating band
• simple and quick assembly: longitudinal compression
• monolithic construction, resistance to corrosion
• matched to the cables of TRISET-113 cable family
• suitable for multiple connecting/disconnecting operations
• very low loss in the whole operating band
• perfect matching to the transmission line within the whole operating band
• simple and quick assembly: longitudinal compression
• monolithic construction, resistance to corrosion
• matched to the cables of TRISET-113 cable family
• suitable for multiple connecting/disconnecting operations
The E3007 monolithic IEC 113 socket is made of brass plated with nickel and is specially prepared for TRISET cables. The high precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The E3008 monolithic IEC 113 plug is made of brass plated with nickel and is specially prepared for TRISET cables. The high precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• wide operating band
• very low loss in the whole operating band
• perfect matching to the transmission line within the whole operating band
• simple and quick assembly: longitudinal compression
• matched to the cables of TRISET-113 family
• quick installation, reliability and durability for competitive price
• very low loss in the whole operating band
• perfect matching to the transmission line within the whole operating band
• simple and quick assembly: longitudinal compression
• matched to the cables of TRISET-113 family
• quick installation, reliability and durability for competitive price
The RCA-BNC adapter is used e.g. for connecting the AUDIO output of a DVR (BNC) to an audio amplifier etc. with RCA input, via a typical RCA-RCA patch cable.
This adapter is used in audio channels, e.g. to connect AUDIO output of a DVR (BNC), via a coaxial cable, to an audio amplifier with RCA input.
A very useful tool for installers that connect lots of plugs to coaxial cables. Equipped with two blades adjustable with the included wrench. Adjustable length of the stripped sheath: 4, 6, 8, or 12 mm.
• Universal tool for preparing coaxial cables prior to installation of connectors
• Adjustable to coaxial cables with different diameters
• Adjustable length of the stripped sheath: 4, 6, 8, or 12 mm
• Adjustable to coaxial cables with different diameters
• Adjustable length of the stripped sheath: 4, 6, 8, or 12 mm
Installation tool for F connectors
• Easy screwing F-connectors onto cable ends
• Comfortable handle
• Especially useful for coaxial cables with PE
jacket
• Comfortable handle
• Especially useful for coaxial cables with PE
jacket
MASTER is a multipurpose tool suitable for compressing F, BNC, RCA, and IEC compression connectors.
• Designed for MASTER compression connectors
• For quick and reliable installation of connectors in TV/SAT and CCTV systems
• Durable tool, made from the highest quality materials
• Compact size
• Suitable for F, RCA, BNC, IEC compression connectors
• Adjustable compression length
• For RG-59, RG-6, Triset-113, Triset Profi cables
• For quick and reliable installation of connectors in TV/SAT and CCTV systems
• Durable tool, made from the highest quality materials
• Compact size
• Suitable for F, RCA, BNC, IEC compression connectors
• Adjustable compression length
• For RG-59, RG-6, Triset-113, Triset Profi cables
Compression tool for compression connectors (F, BNC, IEC) for mounting on TRISET-113, TRISET-11, CAMSET cables. Suitable for E80274, E80275 connectors.
• Compression tool for Platinum connectors
• Suitable for BNC and F-type connectors
• Simple operation
• Ensures stability and reliability of connections
• Suitable for BNC and F-type connectors
• Simple operation
• Ensures stability and reliability of connections
The MASTER E80078 universal compression tool is designed for compressing straight and angular F, BNC, RCA, IEC connectors.
• Universal tool for TV/CCTV installers
• Designed for compression of straight and angular F, RCA, BNC, IEC connectors
• Durable tool made from the highest quality materials
• Suitable for connectors with various lengths (adjustment screw)
• Suitable for RG-59, RG-6, Triset-113, Triset Profi cables
• Designed for compression of straight and angular F, RCA, BNC, IEC connectors
• Durable tool made from the highest quality materials
• Suitable for connectors with various lengths (adjustment screw)
• Suitable for RG-59, RG-6, Triset-113, Triset Profi cables
The MASTER E8010 stripper is a high quality, versatile tool for preparing coaxial cables to install connectors, a must-have device for each installer. The device is equipped with two adjustable blades for RG-59, RG6, Triset-113, Triset Profi oraz Triset-11 cables, plus a knife for stripping computer...
• Versatile tool for preparing coaxial cables to install connectors
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
• Two blades to strip RG-59, RG6, Triset-113, Triset Profi and Triset-11 cables
• Knife for stripping computer and telephone cables
• Knife for cutting cables
• Ability to change the blades
The E8010N blade is a spare part for the MASTER E8010 cable stripper.
The E8011 wrench is a tool necessary for any antenna installer. It is very useful for tightening F connectors, especially in the case of multiswitch systems, as well as for preparing Triset-113/RG6/RG59 cables for terminating with the connectors (built-in stripper).
• Easy installation of F-type connectors
• Especially helpful in multiswitch systems
• Built-in stripper
• Especially helpful in multiswitch systems
• Built-in stripper
![F-connector: 6.8 mm twist-on [100pcs.]](https://www.dipol.com.pl/img/thumbnails/e8012+.jpg/1fc5d27edee4d4b8ea5542760cdd30f8.jpg)
F connector made of nickel-plated copper. It is fully corrosion-proof, and can be used it both, indoors and outdoors.
• Connector type: F twist-on
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Package 100 pcs.
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Package 100 pcs.
F connector made of nickel-plated copper. It is fully corrosion-proof, and can be used it both, indoors and outdoors.
• Connector type: F twist-on
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
• Diameter: 6.8 mm
• Material: nickel-plated copper
• No crimping required
• Dedicated to RG-6 class cables
![F-connector: 7.2 mm twist-on, with a seal [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e8014+.jpg/67e16a68f4e1a1841ed42ddd7687a4e6.jpg)
Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used for both, indoor and outdoor installation.
• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
• Made of nickel-plated copper
• Tool-free
• 100 pcs. package
Key/wrench for fastening F-type connectors.
• Hexagonal key/wrench
• Dedicated to fastening F-type plugs
• Material: aluminum
• Dedicated to fastening F-type plugs
• Material: aluminum
Twist-on 7.2 mm F-connector made of nickel-plated copper. It is fully resistant to corrosion and can be used both, for indoor and outdoor installation.
• Twist-on 7.2 mm F-connector
• Made of nickel-plated copper
• Tool-free
• Made of nickel-plated copper
• Tool-free
F-connector 5.5mm, twisted-on, made of iron
F-connector: 5.5mm (twisted-on, iron)
Rubber seal protecting F-type connector against harmful weather conditions.
F plug made of nickel-plated copper. The connector is fully corrosion-resistant, so it can be used both inside and outside buildings. The lack of corrosion significantly extends the service life of the connections made without the need for cleaning and maintenance.
Within our offer there are several items called "F-connector". What do they differ in? To find out it, we recommend to read the "Different kinds of F-connectors" article...
Top-quality F-connector Platinum for use on TRISET-113 coax. The connector has been designed to ensure watertightness both from the side of the cable and the device.
• Compression connector
• For Triset-113 cable
• Water-tight (protection of the cable against water penetration)
• Log-life, insensitivity to temperature changes
• For Triset-113 cable
• Water-tight (protection of the cable against water penetration)
• Log-life, insensitivity to temperature changes
High quality F-connector for use on TRISET-11 coax
• Type of connector: F compression
• Impedance: 75 Ω
• Material: industrial nickel plated
• Assembly method: PCB compression
• Wide operating bandwidth
• Very low attenuation across the entire operating band
• Tightness on the device side is ensured by a rubber gasket
• Dimensionally advanced to the TRISET-11 / RG-11 cable family
• Impedance: 75 Ω
• Material: industrial nickel plated
• Assembly method: PCB compression
• Wide operating bandwidth
• Very low attenuation across the entire operating band
• Tightness on the device side is ensured by a rubber gasket
• Dimensionally advanced to the TRISET-11 / RG-11 cable family
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 Eca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 Eca cable family
The monolithic F connector is made of nickel-plated brass and is designed for TRISET 302 B2ca, Dca, Fca cables.
• Connector type: F compression
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
• Impedance: 75 Ω
• Material: nickel-plated brass
• Mounting method: longitudinal compression
• Wide operating band
• Very low attenuation in the entire operating band
• Tightness from the device side is ensured by a rubber gasket
• Tight from the cable side
• Dimensionally matched to the TRISET 302 B2ca, Dca, Fca cable family
The F 59 MASTER E80322 male connector is manufactured exclusively for DIPOL. The features of the connector have been specially adjusted to the CAMSET (RG-59) cables.
• Dimensions suitable for CAMSET cables used e.g. in CCTV systems
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
The monolithic E80332 F-connector is made of brass plated with nickel and is specially prepared for RG-6 cables. Special construction and high precision of the product enable easy installation on the cables. The compression method of installation is very simple and guarantees good and stable conne...
• Dimensions suitable for RG6 cables
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
• Simple and quick assembly (longitudinal compression)
• Waterproof termination of the cable and protection of a device's input (o-ring)
• Resistance to corrosion - non-ferrous metals
• Very low loss in the whole operating band
The MASTER F 113 F-male connector is made of zinc-plated bronze. The features of the connector have been specially adjusted to the TRISET cables. Special construction and high precision of the product enable easy installation on the cables. The compression method of installation is very simple and g...
• For quick and reliable connections in TV antenna systems
• Waterproof termination of the cable
• O-ring for waterproof connection with the socket
• Resistance to corrosion - non-ferrous metals (nickel-plated brass)
• Very low loss in the whole operating band
• Matched to the cables of the TRISET-113 family
• Waterproof termination of the cable
• O-ring for waterproof connection with the socket
• Resistance to corrosion - non-ferrous metals (nickel-plated brass)
• Very low loss in the whole operating band
• Matched to the cables of the TRISET-113 family
The monolithic E80345 F-connector is made of brass plated with nickel and is specially prepared for RG-6 Tri-Shield cable. The material used ensures resistance to corrosion. High precision ensures superior quality and professional look. The compression method of installation is very simple and gua...
• Master F connector ideally suited for "tri-shield' cables
• Wide operating band
• Very low loss in the whole operating band
• Waterproof termination of the cable
• Resistance to corrosion - non-ferrous metals, monolithic construction
• Simple and quick assembly: longitudinal compression
• Two compression rings
• Properly compressed connection is highly resistant to break
• Wide operating band
• Very low loss in the whole operating band
• Waterproof termination of the cable
• Resistance to corrosion - non-ferrous metals, monolithic construction
• Simple and quick assembly: longitudinal compression
• Two compression rings
• Properly compressed connection is highly resistant to break
The MASTER 90 F 113 E80348 F-male connector is made of zinc-plated bronze. The features of the monolithic connector have been specially adjusted to the TRISET cables. Special construction and high precision of the product enable easy installation on the cables. The compression method of installation...
• Perfectly matched to Triset-113 cables
• Precise thread
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Precise thread
• Very low loss in the whole operating band
• Exceptional quality and long term durability
The MASTER 90 QF 113 E80350 "fast" or "quick" F-male angular connector is made of zinc-plated bronze. The features of the monolithic connector have been specially adjusted to the TRISET cables. Special construction and high precision of the product enable easy installation on the cables. The compres...
• Perfectly matched to Triset-113 cables
• "Fast" type minimizes installation time
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• "Fast" type minimizes installation time
• Very low loss in the whole operating band
• Exceptional quality and long term durability
The monolithic E80362 F-connector is made of brass plated with nickel and is specially prepared for Triset-11 cable. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time. Preci...
• New! High quality F connector matched to Triset-11 PE cable
• Wide operating band
• Very low loss in the whole operating band
• Resistance to corrosion - non-ferrous metals, monolithic construction
• Perfect matching to the transmission line within the whole operating band
• Simple and quick assembly: longitudinal compression
• Properly compressed connection is highly resistant to break
• Wide operating band
• Very low loss in the whole operating band
• Resistance to corrosion - non-ferrous metals, monolithic construction
• Perfect matching to the transmission line within the whole operating band
• Simple and quick assembly: longitudinal compression
• Properly compressed connection is highly resistant to break
This top-class F-female to F-female adapter allows to join coaxial cables in the most professional way.
• SCTE compliance
• unique and patented contact with cable core
• very low loss
• precise thread
• unique and patented contact with cable core
• very low loss
• precise thread
The E80410 F plug from Cabelcon, Denmark, is intended for applications in home and SMATV systems. The patented design, based on "Self-Install" concept, ensures professional, durable connection, comparable with compression solutions. What is important, no compression tool is needed.
• Unique compression concept
• No tools needed
• Nickel surface
• Class A screening effectiveness
• 3 GHz band
• No tools needed
• Nickel surface
• Class A screening effectiveness
• 3 GHz band
This item pulled out of installer's pocket can sometimes be quite useful.
A very useful item for antenna installers. It enables through-window connection between an outdoor antenna and TV set or SAT receiver, without making a hole in the window frame or in the wall. This extremely flat and flexible cable fits between sash and frame and may be glued to the frame permanentl...
• No drilling work
• Low loss
• Two F-f connectors
• Small size
• Low loss
• Two F-f connectors
• Small size
High-quality ultra-flat window cable, very useful when there is no possibility of drilling through the exterior wall or window frame. With thickness not exceeding 0.2 mm, it will suit any window without any risk for the seal. This extremely flat and flexible lead fits between sash and frame. The F t...
• High quality window cable,
• Thickness: 0.2 mm,
• Flexible and durable,
• Adhesive strips on both sides.
• Thickness: 0.2 mm,
• Flexible and durable,
• Adhesive strips on both sides.
F-female to F-female adapter can sometimes ease the job of an installer. It allows to extend the antenna or satellite cable the easiest way.
• F female - F female connector
• Wall-mount installation
• In-window installation possibility
• Wall-mount installation
• In-window installation possibility
F-female to F-female adapter can sometimes ease the job of an installer. It allows to extend the antenna and satellite cable the easiest way.
This item pulled out of installer's pocket can sometimes be quite useful.
Within our offer there are several items called "F-connector". What do they differ in? To find out it, we recommend to read the article "Different kinds of F-connectors"...
Within our offer there are several items called "F-connector". What do they differ in? To find out it, we recommend to read the article "How to choose the proper F-connector"...
The F-female to quick F-male adapter can be a useful item in the pocket of any antenna installer.
This item pulled out of installer's pocket can sometimes be quite useful.
This item pulled out of installer's pocket can sometimes be quite useful.
F socket connector - antenna plug.
• F socket - IEC antenna plug transition
The E8275 monolithic BNC connector is made of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• BNC Master connector for CCTV systems
• Wide operating band
• Matched to the cables of CAMSET family and RG-59 cables
• Very low loss in the whole operating band,
• Perfect matching to the transmission line within the whole operating band
• Many patented technologies
• Wide operating band
• Matched to the cables of CAMSET family and RG-59 cables
• Very low loss in the whole operating band,
• Perfect matching to the transmission line within the whole operating band
• Many patented technologies
The monolithic E8276 BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The E8277 monolithic BNC connector is made of brass plated with nickel and is specially prepared for TRISET-113 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
The E8278 monolithic angular BNC connector is made of brass plated with nickel and is specially prepared for CAMSET/RG-59 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a lon...
• Perfectly matched to RG-59/CAMSET cables
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
The E8279 angular BNC connector is made of brass plated with nickel and is specially prepared for RG-6 cables. High precision ensures superior quality and professional look. The compression method of installation is very simple and guarantees good and stable connection for a long time.
• Perfectly matched to RG-6 cables
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
• Special element ensures proper contact
• Very low loss in the whole operating band
• Exceptional quality and long term durability
F socket connector - antenna socket.
• F socket - IEC antenna socket transition
The E8284 F-female to BNC-male adapter is significantly different from the low-cost gear offered on the market. For a slightly higher price the user gets a brand product with defined characteristics. Carefully selected materials and excellent manufacturing accuracy ensure quick and reliable assembly...
BNC 75 plug crimped for RG-59.
• Connector type: BNC crimped
• Crimping tool required
• Crimping tool required
BNC 75 plug crimped suitable for the RG-6 cable.
• It allows you to terminate an RG-6 cable with a BNC plug
It requires the use of a crimping tool
It requires the use of a crimping tool
BNC connector designed for H155 coaxial cable with an impedance of 50 ohms.
• For H155 cable
• Impedance 50 ohms
• Impedance 50 ohms
The BNC socket – BNC socket adapter allows you to connect two BNC plugs.
• It allows you to connect two BNC plugs
The E9315 antenna box is used for DIPOL antennas. It protects a balun or preamplifier placed inside.
![Cable Tie with ID Tag: GTK-110M [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e950611+.jpg/0e591a579476a115e15dc246cd2b57d4.jpg)
The cable tie can be used to make cable harnesses or to mark wires for easier identification.
• Color: white
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
![Cable Tie: TZ10/3Ns (white) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951032+.jpg/f8707e16d788fac6c5f129af11c65ec1.jpg)
The ties are made of special, high quality plastic: POLIAMID 6.6 UL 94 V2.
• High tenacity strength: 114 kg
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
![Cable Ties GTK-100M (100x2.5mm, yellow) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951042+.jpg/bc5982c4da2fa80c811f030a5adf30b6.jpg)
The E951042 cable ties can be used for binding cables into bundles or marking cables for easier identification.
![Cable Ties GTK-100M (100x2.5mm, red) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951043+.jpg/dca8c9efbb23d8864840fcbe2eb73728.jpg)
The E951043 cable ties can be used for binding cables into bundles or marking cables for easier identification.
![Cable Ties GTK-100M (100x2.5mm, green) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951044+.jpg/7c81e5085d5cadac9a6841ada2c6c6c6.jpg)
The E951044 cable ties can be used for binding cables into bundles or marking cables for easier identification.
![Cable Ties GTK-100M (100x2.5mm, black) [100 pcs.]](https://www.dipol.com.pl/img/thumbnails/e951045+.jpg/33698c51b5ef93eccc1dbbb134ddcde8.jpg)
The E951045 cable ties can be used for binding cables into bundles or marking cables for easier identification.
![Cable Tie TZ20/3Ns (white) [100pcs.]](https://www.dipol.com.pl/img/thumbnails/e952032+.jpg/84bcf076d594208ae4644b2841fde606.jpg)
The ties are made of special, high quality plastic: POLIAMID 6.6 UL 94 V2.
![Cable Tie TZ20/5Cs (black) [100pcs]](https://www.dipol.com.pl/img/thumbnails/e952054+.jpg/d7f6e2913d6d977a447170465d10e621.jpg)
The ties are fully made of highest quality nylon: POLIAMID 6.6 UL 94 V2.
![Cable Tie TZ37/5Cs (black) [100pcs]](https://www.dipol.com.pl/img/thumbnails/e953754+.jpg/b5cb08a912d705bd286794ec561aee34.jpg)
The ties are fully made of highest quality nylon: POLIAMID 6.6 UL 94 V2.
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Length: 0.5 m
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 0.5 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable 1.4 standard compatible
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Max. video resolution 4096x2160
• Two filters
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 1 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution ///4096x2160///
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Signal cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius.
• Length: 1 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth up to 48Gbps,
• Ethernet channel.
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI v1.4 cable
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
• Max. video resolution of 4096x2160 pixels
• Two RFI filters
• 2-meter long
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 2 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Flat cable, length of 2 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
The HDMI Slim cable meets all the requirements of the HDMI 2.1 standard. It has a small diameter (4 mm) and a short bending radius (40 mm).
• Length: 2 m,
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
• HDMI v2.1 standard,
• Cable thickness is 4 mm,
• Plug size 18 mm at the widest point,
• Image transmission at a maximum resolution of 7680×4320p,
• Image transmission at FullHD, UltraHD, 8K,
• Support for dynamic HDR (HDR10+),
• Support for enhanced audio return channel (eARC),
• Maximum bandwidth
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI cable v1.4
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
• Two RFI filters
• Length: 3 m (we also offer cables with other lengths)
The HDMI Slim cable has small dimensions and reduced minimum bending radius. The use of the cable solves problems such as limited space behind the connected device or dense packing of HDMI inputs, as well can improve the aesthetic qualities of the connection. The cable transmits both digital video a...
• Length: 3 m
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Cable diameter: 4 mm
• Plug width (max): 18 mm
• HDMI specification: v1.4
• Max. video resolution 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Flat cable, length of 3 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Easy connection between HD equipment, up to 5 m
• HDMI v1.4
• Ethernet channel
• Two EMI/RFI filters
• HDMI v1.4
• Ethernet channel
• Two EMI/RFI filters
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Flat cable, length of 5 m
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• HDMI specification v1.4
• Max. video resolution of 4096x2160
• Transmission of FullHD video
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• High quality HDMI v1.4 cable
• Flat cable
• Length of 7 m (other lengths available)
• Flat cable
• Length of 7 m (other lengths available)
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Length: 10 m
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• AWG: 28 (0.321 mm)
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
• Length: 15 m
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
• Two filters
• HDMI specification: v1.4
• Max. video resolution: 4096x2160
• Deep Color (48-bit) - vibrant and natural colors
• Possibility of transmitting 3D video
• Audio Return Channel
• Ethernet channel
This HDMI male to HDMI male cable allows the connection of HDMI devices (sat receiver, Blu-ray player, computer, game console etc.) to HD-enabled projector, plasma or LCD TV. The cable transmits both digital video and audio, without any loss in quality.
The cable is designed to connect HD satellite receivers, game consoles and computers to TVs. The cable transmits both video and sound.
• Length: 30 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
The active fiber optic cable is used to connect a HDMI signal source to a monitor / television located up to 50 meters away. The cable supports the HDMI 2.0 standard (18 Gbps bandwidth). It has a small diameter (4.5 mm) and does not require an external power supply (is powered from the HDMI port).
• Length: 50 m
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
• Support for HDMI 2.0 – 18 Gbps throughput
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2
• AUDIO return channel
• Ethernet channel
• High flexibility
The active fiber optic cable is used to connect a HDMI signal source to a monitor / television located up to 70 meters away. The cable supports the HDMI 2.0 standard (18 Gbps bandwidth). It has a small diameter (4.5 mm) and does not require an external power supply (is powered from the HDMI port).
• Length: 70 m,
• Support for HDMI 2.0 – 18 Gbps throughput,
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2,
• AUDIO return channel,
• Ethernet channel,
• High flexibility.
• Support for HDMI 2.0 – 18 Gbps throughput,
• Support for 4K UHD, 3D, Deep Color, HDR 10, HDCP 2.2,
• AUDIO return channel,
• Ethernet channel,
• High flexibility.
The HDMI female to HDMI female adapter (gender changer) allows to connect two typical HDMI cables.
• For connecting two HDMI cables
• High quality
• High quality
The HDMI to HDMI angle adapter has the ability to change the angle (within 180° range) between an HDMI socket of any device and a plug of an HDMI cable, to enable connection in the case of problems with physical access to the HDMI socket.
• Ability to change the angle (within 180° range) between an HDMI socket of any device and the plug of an HDMI cable
• Ideal for connection in the case of problems with physical access to an HDMI socket
• Ideal for connection in the case of problems with physical access to an HDMI socket
The HDMI plug to HDMI socket angle adapter (90 deg.) allows for easy connection of an HDMI cable e.g. in the case of close distance between the rear panel of television/monitor to the wall.
• Input-output angle adjustment (90º)
• Ideal when there is no much space for device and cable installation
• Ideal when there is no much space for device and cable installation
Cable with a lenght of 2 m enabling audio/video transmission between devices equipped with a DisplayPort connector.
• Length: 2 m
• Connectors: DP-DP
• Max. resolution: 4K
• Connectors: DP-DP
• Max. resolution: 4K
Cable with a lenght of 2m for audio/video transmission between DisplayPort and HDMI devices.
• Length: 2 m
• Connectors: DisplayPort - HDMI
• Connectors: DisplayPort - HDMI
Signal-HD HDMI Switcher 3x1 (H3131) enables the user to connect up to three sources of high-definition signals to a modern TV set equipped with HDMI input. The amplified output signal can be transmitted via HDMI 1.3b cable over distance up to 15 m. The choice of the device from which the signal is c...
• Enables connection of three devices to one HDMI input
• Input signal selected with remote control
• Support for 12-bit Deep Color
• Maximum resolutions: 1080p, 1920 x 1200
• Input signal selected with remote control
• Support for 12-bit Deep Color
• Maximum resolutions: 1080p, 1920 x 1200
Signal-HD HDMI 2.0 Switcher 3x1 H3132 enables the user to connect up to three sources of high-definition signals (up to 4K x 2K at 60 Hz) to a modern television or monitor equipped with HDMI input. The amplified output signal can be transmitted via HDMI 2.0 cable over distance up to 15 m. The choic...
• Connection of 3 sources of high-definition signals to one HDMI input
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Support for HDCP
• Remote control
• Support for HDMI 2.0
• Support for 4K x 2K resolution
• Support for 3D
• Support for HDCP
• Remote control
Signal-HD HDMI 2.0 Splitter 1x2 H3213 enables the user to connect 2 modern televisions/monitors equipped with HDMI inputs to a source of high-definition signal. The amplified output signals can be transmitted via HDMI 2.0 cables over distances up to 15 m. This product is ideal for demonstration of H...
• Easy installation
• HDMI signal distribution to 2 monitors/TVs
• Support for HDMI 2.0
• Support for 4K x 2K resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• HDMI signal distribution to 2 monitors/TVs
• Support for HDMI 2.0
• Support for 4K x 2K resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
Signal HD HDMI Splitter 1x4 (4K2K) H3216 enables the user to connect 4 modern televisions/monitors equipped with HDMI inputs to a source of high-definition signal. This splitter can amplify and buffer the signal.
• Easy installation
• HDMI signal distribution to 4 monitors/TVs
• EDID function
• Support for HDMI 2.0
• Support for HDCP 1.4 HDCP 2.2
• Support for 4K x 2K resolution at 60 Hz
• Support for TS Digital, Dolby Digital, DTS-HD, Dolby True HD.
• HDMI signal distribution to 4 monitors/TVs
• EDID function
• Support for HDMI 2.0
• Support for HDCP 1.4 HDCP 2.2
• Support for 4K x 2K resolution at 60 Hz
• Support for TS Digital, Dolby Digital, DTS-HD, Dolby True HD.
Signal-HD HDMI Splitter 1x8 enables the user to connect up to 8 modern TV sets equipped with HDMI inputs to a source of high-definition signal. The amplified output signals can be transmitted via HDMI 1.4 cables over distances up to 15 m. This product is ideal for demonstration of HD and 4K televisi...
• Easy installation
• HDMI signal distribution to up to 8 monitors/TVs
• Support for HDMI 1.4
• Support for 4K resolution
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Support for 12-bit Deep Color (36 bits for all channels)
• Gilded connectors
• HDMI signal distribution to up to 8 monitors/TVs
• Support for HDMI 1.4
• Support for 4K resolution
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Support for 12-bit Deep Color (36 bits for all channels)
• Gilded connectors
Signal-HD HDMI 2.0 Splitter 1x8 H3219 enables the user to connect up to 8 modern televisions/monitors equipped with HDMI inputs to a source of high-definition signal. The amplified output signals can be transmitted via HDMI 2.0 cables over distances up to 15 m. This product is ideal for demonstratio...
• New! 8-output HDMI splitter with support for 4K
• Easy installation
• HDMI signal distribution to 8 monitors/TVs
• Support for HDMI 2.0
• Support for 4k x 2k resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
• Easy installation
• HDMI signal distribution to 8 monitors/TVs
• Support for HDMI 2.0
• Support for 4k x 2k resolution at 60 Hz
• Support for HDCP
• Support for DTS Digital, Dolby Digital, DTS-HD, Dolby True HD
The Signal HDMI H3601 converter/extender allows for transmission of HDMI signal over longer distances via minimum Cat. 5 twisted pair cable. There is also the possibility of IR remote control extension. The extender kit consists of transmitter and receiver units.
• New! Transmission via a single Cat. 5/5e/6 cable
• Transmission speed up to 10.2 Gb/s
• Support for 1080p
• Maximum range (Cat. 5): 80 m
• Maximum range (Cat. 5e): 100 m
• Maximum range (Cat. 6): 120 m
• IR remote control extender
• Transmission speed up to 10.2 Gb/s
• Support for 1080p
• Maximum range (Cat. 5): 80 m
• Maximum range (Cat. 5e): 100 m
• Maximum range (Cat. 6): 120 m
• IR remote control extender
The converter allows for transmission of HDMI signal over longer distances via minimum cat. 6 twisted pair cable. A USB control extension is provided.
• Transmission via a single Cat. 5/5e/6 6
• 1080p video mode
• Cat. 6 range up to 70 m
• USB extension cable
• 1080p video mode
• Cat. 6 range up to 70 m
• USB extension cable
The Signal HDMI H3603 converter/extender allows for transmission of HDMI signal over long distances via minimum Cat.6 twisted pair cable. The set can also extend IR control signals. The extender kit consists of transmitter (sender) and receiver units.
• Transmission via a single Cat. 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Support for 4K x 2K 60Hz
• 4K x 2K 30 Hz - maximum range (Cat. 6/6A/7): 60 m
• 4K x 2K 60 Hz - maximum range (Cat. 6/6A/7): 30 m
• IR remote control extender
• Transmission speed up to 18 Gbps
• Support for 4K x 2K 60Hz
• 4K x 2K 30 Hz - maximum range (Cat. 6/6A/7): 60 m
• 4K x 2K 60 Hz - maximum range (Cat. 6/6A/7): 30 m
• IR remote control extender
Signal-HD HDMI to IP converter enables the user to connect remote (up to 100 m) source of HD content to HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units, as well as remote control extender for a Blu-ray/DVD player, STB etc.
• HDMI to IP conversion
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology (switch)
• Built-in remote control extender function
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. IR extender.
• Transmission via a single cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• IR extender
• Maximum cable length: 100 meters
The HDMI fiber optic converter allows for connection of HD signal to a receiver (TV, monitor) via optical network. IR extender.
• Transmission of HDMI signal via one single-mode fiber
• Max range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
• Max range of 20 km
• Signal source remote control possible - IR signal transmission
• Transmission of SD and HD signals and HD 1080p
• Support for HDCP
SignalHD H3610 repeater allows to use long HDMI cables. The repeater has to be located between two long cables, the first of them (between the source device and the input of the repeater) cannot be longer than 35 meters, and the second (between the repeater output and the destination device) should ...
• HDMI regeneration
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Easy installation.
• Possibility of transmitting HDMI signals over distances up to 45 m
• Transmission of HD video up to 1080p
• Easy installation.
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (4K) signal connection to the receiver (TV, monitor) via the IP network. USB extender
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 4K
• Maximum cable length 100 m
The Signal-HD HDMI to IP converter enables the user to connect a remote (up to 100 m) source of HD content to an HD-enabled television/monitor, using one CAT5e/6 cable. The set includes transmitter and receiver units. USB ports in the units also allow for remote control of e.g. a DVR/NVR, by using a...
• HDMI transmission via a single Cat. 5e/6 cable
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
• USB extender for remote control of e.g. DVR/NVR!
• UDP/IP protocol
• Support for 1080p mode
• Maximum length of the transmission cable: 100 meters
The additional receiver for use with the H3613 set allows sending HDMI signals over an IP network to another monitor/TV (using an Ethernet switch). The receiver has the ability to transmit a USB signal to the sender in order to control the source of the HDMI signal.
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Minimized data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
• Minimized data stream in the network
• UDP/IP protocol (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum length of cable: 100 meters
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network.
• Transmission via a single Cat. 5e/6 cable
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
• Low data stream load to the network
• UDP/IP transmission (multicast)
• Possibility of point-to-multipoint topology
• Support for 1080p mode
• Maximum cable length: 100 meters
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The HDMI to IP converter enables the high definition (HD) signal connection to the receiver (TV, monitor) via the IP network. USB extender.
• HDMI transmission using a single cable cat. 5e/6
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
• USB extender – DVR control possible!
• UDP/IP transmission
• Video mode 1080p
• Maximum cable length 100 m
The Signal HDMI H3644 converter/extender allows for transmission of HDMI signal over longer distances via minimum Cat. 6 twisted pair cable.
• Transmission via a single Cat. 5/5e/6 6/6A/7 cable
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
• Transmission speed up to 18 Gbps
• Image type 4K x 2K 60Hz
• No delays
• Support for DTS, Dolby
• Support for Audio Return Channel (ARC) and S/PDIF
• Bidirectional IR remote control extender
The Keystone F/IEC adapter allows to connect two coaxial cables terminated with F and IEC plugs.
Keystone module with F-f to F-f adapter, to connect two cables terminated with F plugs.
The Keystone HDMI adapter allows to connect two HDMI cables.
![CCTV Cable: CAMSET/YAR 75-0.59/3.7+2*0.50 (2 power wires up to 230VAC) [100m]](https://www.dipolnet.com/img/thumbnails/m5995_100+.jpg/ca3e147173863fc35b13aa7ca0dcdc04.jpg)
CAMSET/YAR M5995 is a high quality CCTV cable used for transmitting baseband video and supplying power to cameras or other CCTV devices. Its copper conductors ensure low resistance and attenuation.
• Version of RG-59 cable for CCTV systems
• Dedicated for indoor applications
• Two power wires up to 230 VAC
• Copper core and braid of the coaxial cable
• Thorough tests of the final product
• 6-year quality guarantee
• Meter marking
• Dedicated for indoor applications
• Two power wires up to 230 VAC
• Copper core and braid of the coaxial cable
• Thorough tests of the final product
• 6-year quality guarantee
• Meter marking
The Li-Ion 7.4 V / 5000 mAh rechargeable battery is dedicated for the Signal WS-6980 R10837 DVB-T/T2/C and DVB-S/S2 meter.
The Li-Ion 7.4 V / 3000 mAh rechargeable battery dedicated for the Signal WS-6916 R10821 and Signal WS-6975 R10514 meters.
Lithium-ion battery with a capacity 2600 mAh for DVB-T/T2/C and DVB-S/S2 ST-5150/ST-5155 Signal meters.
• Lithium-ion rechargeable battery
• Capacity 2600 mAh
• Fits for ST-5150 meter
• Fits for ST-5155 meter
• Capacity 2600 mAh
• Fits for ST-5150 meter
• Fits for ST-5155 meter
Lithium-ion battery with a capacity 5000 mAh for DVB-T/T2/C and DVB-S/S2 ST-6986 Signal meters
• Lithium-ion rechargeable battery
• Capacity 5000 mAh
• Fits for ST-6986 meter
• Capacity 5000 mAh
• Fits for ST-6986 meter
Meter TZU 22 DVB-T Finder is intended for individual Terrestrial antennas.
• Frequency range 47-862 MHz
• Power supply via set top box
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Connector power supply 3,5 mm jack
• PWR RF range 50-80 dBuV
• Power supply via set top box
• External power supply 5-12 V
• Power consumption 25 mA
• Input connector "F"
• Output connector "F"
• Connector power supply 3,5 mm jack
• PWR RF range 50-80 dBuV
Multipurpose meter ST-5155 allows to measure DVB-S2X/S2/S (HD) satellite signal, DVB-T/DVB-T2 (HD) terrestrial TV signal in HEVC 10 Bit compression and DVB-C cable signal.
• Measures DVB-T/T2/C and DVB-S2X/S2/S signals (fully compatible with MPEG-2/MPEG-4)
• Supports DVB-T2 with H.265/HEVC
• Views the received channel on LCD display
• Built-in video decoder: MPEG-2/H.264/H.265/HEVC 10 bit
• Percentage indication of signal strength and quality
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, C/N, BER, MER
• Li-On 7.4 V/2600 mAh battery
• Possibility to edit satellite, transponder, frequency
• Supports +++DiSEqC: 1.0, 1.1, 0/22 kHz Tone, Unicable (dSCR), wideband+++
• USB connector (supported file format: wma,mp3,mp4,avi,jpg,jpeg,bmp,img)
• Satellite path short circuit protection (LNB)
• Supports DVB-T2 with H.265/HEVC
• Views the received channel on LCD display
• Built-in video decoder: MPEG-2/H.264/H.265/HEVC 10 bit
• Percentage indication of signal strength and quality
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, C/N, BER, MER
• Li-On 7.4 V/2600 mAh battery
• Possibility to edit satellite, transponder, frequency
• Supports +++DiSEqC: 1.0, 1.1, 0/22 kHz Tone, Unicable (dSCR), wideband+++
• USB connector (supported file format: wma,mp3,mp4,avi,jpg,jpeg,bmp,img)
• Satellite path short circuit protection (LNB)
The AS07STCA-4K certified signal meter can measure DVB-S/DVB-S2 (4K) satellite signal, DVB-T/T2 (4K) terrestrial TV signal in HEVC 10 Bit compression and C/J.83B/ISDB-T cable signal.
• Measurement of DVB-T/T2/C/J.83B/ISDB-T and DVB-S/S2 signals
• Support for DVB-T2 with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, MER, Link Margin, CBER, VBER
• USB connector (possibility to take a screenshot of current signal measurement, export measurements to .csv file)
• RF signal measurement in the range of 20...100 dBμV
• View of the received channel on the touch screen TFT-LCD display size 7" with high resolution 4K
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Real-time signal spectrum analyzer for detecting interference from LTE signals
• Constellation display
• Large Li-On 7.4 V/7000 mAh battery – enough for about 3-4 h of continuous operation
• Efficient and easy-to-use user interface.
• Support for DVB-T2 with H.265/HEVC 10 bit
• Built-in video decoder: MPEG-2/H.264/HEVC(H.265) 4K
• Certified calibration
• Menu in Polish, English, Italian, Spanish, Portuguese, Czech, German, Arabic
• Measurement of all necessary signal parameters such as signal level expressed in dBμV, MER, Link Margin, CBER, VBER
• USB connector (possibility to take a screenshot of current signal measurement, export measurements to .csv file)
• RF signal measurement in the range of 20...100 dBμV
• View of the received channel on the touch screen TFT-LCD display size 7" with high resolution 4K
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• Real-time signal spectrum analyzer for detecting interference from LTE signals
• Constellation display
• Large Li-On 7.4 V/7000 mAh battery – enough for about 3-4 h of continuous operation
• Efficient and easy-to-use user interface.
The combo meter ST-6986 measures DVB-S/DVB-S2 (HD) satellite signal, DVB-T/T2 (HD) terrestrial TV signal in HEVC 10 Bit compression and DVB-C cable signal.
• Measures DVB-T/T2/C and DVB-S/S2 signals
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
• Supports DVB-T2 with H.265/HEVC 10 bit
• Views the received channel on the 7" LCD display
• Built-in video decoder: MPEG-2/H.264/H.265
• DiSEqC support: 1.0, 1.1,1.2, 0/22 kHz Tone, Unicable (dSCR), Wideband
• USB connector (possibility to take a screenshot of the current measurement)
• Signal strength and quality indication
• Optical power meter
• Measurement of all necessary signal parameters such as: Signal level expressed in dBμV, C/N, BER, MER
• Signal spectrum analyzer
• Constellation chart
• Satellite finding beeper (can be turned off)
• Car charger included
• Li-On 7.4 V/5000 mAh battery
• Editable satellite, transponder, frequency
• Short-circuit protection in satellite path (LNB)
Signal surge protector - an ideal device for everyone who cares for their TV and satellite equipment: multiswitch, satellite receiver, television, stereo - the best precautionary measure against thunderstorms that can happen not only in the summer, but also in the fall and springtime. The device ca...
• Lightning protection of TV and SAT TV devices
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
• Pass band: 5-2400 MHz
• Insertion loss not higher than 1.5 dB
• Maximum current (8/20 µs): 8 kA
• Screening efficiency: A class
In bigger installations, the differences of potentials between individual parts of the antenna/cable networks may cause overvoltages and surge currents effecting in sparks when connecting the equipment (and even light electric shocks). It may also be the reason of unexpected damages of the equipment...
• Solves problems caused by potential differences between network segments, network and receivers etc.
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
• Operating band: 2400 MHz
• Low loss (<1.5 dB up to 1000 MHz)
• Full galvanic isolation (both of signal path and screen
• Breakdown voltage 3000 V for 1 minute test with current leak < 0.7 mA
Signal surge protection box R48606 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects the system against voltage surges induced in signal lines by lightning strokes.
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
Signal ZPZ-12 surge protection installation box R48612 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (12) against voltage surges induced in signal lines by lightning strokes.
Signal ZMZ-12 surge protection installation box R48614 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (12) against voltage surges induced in signal lines by lightning strokes. Intended for mountin...
• Inner/outer box made of PA 11 aluminum alloy, powder coated in RAL 7035
• Cable openings are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
• Cable openings are located at the bottom of the box
• Number of protectors 12
• Operating band 5-2400 MHz
• Maximum current for 8/20µs 8 kA
• Breakdown voltage at 100 V/s DC 230+/-42 V
• Protection level at 1 kV/µs ≤ 800 V
Signal ZMZ-13 surge protection installation box R48615 has been designed for comprehensive protection of SMATV systems based on multiswitches. The device protects all the satellite and terrestrial TV paths (13) against voltage surges induced in signal lines by lightning strokes. Intended for mountin...
The Signal LTE700 filter (R49601) is used for TV/SAT systems and can filter unwanted signals in the 700 MHz band.
• Attenuation of LTE700 signals (band > 694 MHz).
• Very steep slope of attenuation curve on the band boundary
• Very steep slope of attenuation curve on the band boundary
The attenuator is intended to reduce RF signal level within 5-2400 MHz range in CATV antenna systems.
• Operating frequency range: 5-2400 MHz
• Attenuation: 10 dB
• DC pass-through: 30 V (max 1 A)
• Metal housing.
• Connector: F plug, F socket
• Attenuation: 10 dB
• DC pass-through: 30 V (max 1 A)
• Metal housing.
• Connector: F plug, F socket
The attenuator is intended to reduce RF signal level within 5-1000 MHz range in CATV antenna systems. The device ensures very stable level of attenuation.
The attenuator is intended to reduce RF signal level within 5-1000 MHz range in CATV antenna systems. The device ensures very stable level of attenuation.
The attenuator is intended to reduce RF signal level within 5-1000 MHz range in CATV antenna systems. The device ensures very stable level of attenuation.
The attenuator is intended to reduce RF signal level within 5-1000 MHz range in CATV antenna systems. The device ensures very stable level of attenuation.
The attenuator is intended to reduce RF signal level within 47-2150 MHz range in S/MATV antenna systems.
• Evaluation: 0...20 dB
• Operating band: 47-2150 MHz
• DC pass - max 24 V, 500 mA
• Operating band: 47-2150 MHz
• DC pass - max 24 V, 500 mA
The coaxial cable attenuation equalizer 4 dB EQF041 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 15 m line extension
• 4 dB attenuation compensation
• 15 m line extension
• 4 dB attenuation compensation
The coaxial cable attenuation equalizer 8 dB EQF081 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 30 m line extension
• 8 dB attenuation compensation
• 30 m line extension
• 8 dB attenuation compensation
The coaxial cable attenuation equalizer 12 dB EQF121 TERRA is used to compensate for differences in satellite signal attenuation through the coaxial cable in systems with Wideband LNBs.
• Attenuation equalizer for Wideband systems
• 45 m line extension
• 12 dB attenuation compensation
• 45 m line extension
• 12 dB attenuation compensation
The attenuator is intended to reduce RF signal level within 5-2400 MHz range in CATV antenna systems with the DC pass-through.
• Operating frequency range: 5-2400 MHz
• Smooth attenuation adjustment from 3 dB to 18 dB
• DC pass-through max. 500 mA
• Smooth attenuation adjustment from 3 dB to 18 dB
• DC pass-through max. 500 mA
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits DVB-T / FM signals into two paths
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
• Operating band: 5-1000 MHz
• F-f connectors
• Cast aluminum housing
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
The splitter is CE certified. Its operating frequency range is 5-1000 MHz and the product represents good, standard parameters within its class. It is equipped with F connectors and cast aluminum housing.
• Splits FM/DAB/TV signals into 8 paths
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
• 5-1000 MHz operating band
• Loss: max 12.1 dB
• Die-cast aluminum housing
• F connectors
The operating frequency range of the tap is 5-1000 MHz. The product ensures good quality and suitability for professional use. Continuous quality control guarantees very good repeatability of technical parameters. The tap is equipped with F connectors and cast aluminum housing.
The family of FAC ta...
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing. The product ensures good quality and suitability for professional use. Continuous quality control guarantees repeatability of parameters.
The family of FAC taps contains wide range of devic...
The operating frequency range is 5-1000 MHz. The tap is equipped with F connectors and cast aluminum housing.
• Dedicated to FM and TV systems
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
• Die-cast enclosure
• High input/output separation
• Screening efficiency class A
The tap is CE certified. Its operating frequency range is 5-1000 MHz. The product ensures good quality and suitability for professional use. The tap is equipped with F connectors and cast aluminum housing.
The operating frequency range of the tap is 5-1218MHz. The product ensures good quality and suitability for professional use.
• Die-cast casing made of aluminum alloy
• Operating frequency range: 5-1218 MHz
• Screening class: A
• Different attenuation on outputs
• Operating frequency range: 5-1218 MHz
• Screening class: A
• Different attenuation on outputs
End-of-line RF outlet from Satel. The GAR-BG-DK outlet (flush wall plate) is dedicated for star-shaped installations with taps.
HDMI Outlet GMH-1NT R62144 (single HDMI v.1.4 socket).
• Hgh quality surface-mounted HDMI socket
• HDMI 1.4 standard,
• High quality white plastics
• Can be mounted in a double or triple frame
• HDMI 1.4 standard,
• High quality white plastics
• Can be mounted in a double or triple frame
Surface TV/FM outlet from Satel (end-of-line).
The TV outlet has been designed for flush mount applications. The distribution of RF signal is carried out by the angle F-f to F-f adapter embedded in the housing. A coaxial cable carrying the RF signal, terminated with F plug, is to be screwed on to the rear part of the adapter.
Due to a modular housing, the outlet can be surface or flush mounted, as well as installed in a frame. Distribution of the RF signal is carried out by the F-f to F-f adapter screwed into the central part of the housing. Before installation, the adapter has to be unscrewed. The connection of the RF c...
GIS-F1-1/P P/T flush-mounted socket for individual television installations.
• A socket at the end of the television installation
• Recessed installation
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick assembly
• Recessed installation
• Two F-type connectors
• Possibility of connecting any TV signal
• Easy and quick assembly
The TV outlet has been designed for surface mount applications. The distribution of RF signals is carried out by the angle F-f to F-f adapters embedded in the housing. Coaxial cables carrying RF signals, terminated with F plugs, are to be screwed on to the rear parts of the two adapters.
• Two paths
• Angle F-f to F-f adapters
• Flush-mount design
• Angle F-f to F-f adapters
• Flush-mount design
This housing is designed for surface mount or for use within frames. Distribution of the RF signal is carried out by F-type sockets embedded in the housing. The connection of the RF cable coming from satellite dish (LNB), receiver or accessories is made with F-plug screwed on the cable tip, which is...
• End-of-line TV outlet
• Surface-mounted
• Two F connectors
• Compatible with SAT and terrestrial TV signals
• Easy to mount
• Surface-mounted
• Two F connectors
• Compatible with SAT and terrestrial TV signals
• Easy to mount
This housing is designed for flush mount (inside cable box). Distribution of the RF signal is carried out by F-type sockets embedded in the housing. The connection of the RF cable coming from satellite dish (LNB), receiver or accessories is made with F-plug screwed on the cable tip, which is then sc...
The GAR-BG-DK-SAT subscriber outlet is a piece of equipment designed for using within satellite master antenna systems (SMATV) and satellite antenna individual installations (SAII). Between the SAT output and input there is transition of DC and LF current, which enables to power and control LNB(s) s...
• New! - antenna outlet dedicated for multiswitch systems
• F-type connectors
• SAT path loss of 2 dB
• High screening efficiency (85 dB)
• F-type connectors
• SAT path loss of 2 dB
• High screening efficiency (85 dB)
Optical outlet GMO-2PT R62202 equipped with two SC/PC sockets/adapters.
Pass-through flush outlet with moderate tap attenuation (10 dB).
Pass-through outlet with tap attenuation of 14 dB.
Pass-through flush outlet with 16 dB tap attenuation.
Frame for integrating two Satel outlets.
The resistor is dedicated for mounting on unloaded outputs of taps, splitters, and amplifiers in order to terminate the line section.
Terminating resistor with DC block, for closing unused RF inputs/outputs of SS-5xx taps and multiswitches.
The FC37 RF/DC separator cuts off DC voltage at any point of the antenna system and passes the RF signal.
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Compact multiswitch in radial topology,
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 4 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Radial topology
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
• 8 outputs
• Passive FM/DAB/DVB-T path with On/Off 12 VDC
• Isolation between inputs >25 dB
• High isolation between outputs: 28 dB
• Cable characteristics equalization
• Very high maximum input level: 105 dBμV
• High maximum output: 100 dBμV
• Compact size: 146×120×42 mm
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Multiswitch in radial topology,
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 12 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 4 from a quatro LNB, 1 from terrestrial antenna,
• Outputs: 12 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
The new family of Signal multiswitches enables the implementation of antenna systems for reception of satellite and terrestrial TV and radio signals in single-family houses as well as small residential and office buildings. The multiswitches are designed to work indoors. Due to star topology, all ca...
• Compact multiswitch in radial topology,
• Inputs: 8 from two quatro LNBs, 1 from terrestrial antenna,
• Outputs: 8 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
• Inputs: 8 from two quatro LNBs, 1 from terrestrial antenna,
• Outputs: 8 to SAT receivers,
• Passive FM/DAB/DVB-T path with On/Off 12 VDC switch,
• Isolation between inputs >25 dB,
• High isolation between outputs: 28 dB (no crosstalk between bands and polarizations),
• Cable characteristics equalization,
• Very high maximum input level: 105 dBμV,
• High maximum output: 100 dBμV,
• Voltage indicators in the power supply unit and the multiswitch (simple diagnostics of a power failure and/or short circuit in the terrestrial path),
• External power supply: 18 VDC / 1 A.
Subscriber outlet integrating FM/TV/SAT antenna system with telephone network and LAN, from renowned Signal series of RF equipment (splitters, taps, transmitters, remote control extenders).
• Multifunctional terminal outlet
• FM/TV/SAT/Phone/LAN sockets
• For flush mounting
• Insertion loss below 3 dB
• FM/TV/SAT/Phone/LAN sockets
• For flush mounting
• Insertion loss below 3 dB
The TV/SAT wall outlets R694100 are mainly used in multiswitch systems, as the terminal outlets for subscribers' receivers. They are suitable for systems where all signals (FM, TV, SAT TV) are provided by one coaxial cable. The built-in filters separate the satellite and terrestrial (FM and TV) sign...
• Popular outlet used in installations based on multiswitches,
• 3 signal outputs: FM radio, terrestrial TV, satellite TV,
• Suitable for flush or surface mounting,
• Easy installation,
• Max. insertion loss 3.5 dB.
• 3 signal outputs: FM radio, terrestrial TV, satellite TV,
• Suitable for flush or surface mounting,
• Easy installation,
• Max. insertion loss 3.5 dB.
The subscriber terminal outlet Signal RTV R694130 has been designed for use in individual and shared antenna systems distributing terrestrial DVB-T, DAB and FM signals.
• Affordable high quality TV and FM outlet
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
• For flush or surface mounting
• Attenuation in TV path (UHF): 1.2 dB
• Attenuation in FM path 1.8 dB
Signal R694140 is designed for installations where one coaxial cable feeds terrestrial TV, FM radio, and satellite TV signals (SAT1), and second one provides another independent satellite signal (SAT2). This ensures two independent satellite signals for a dual-tuner PVR receiver (capable of recordin...
• Can provide independent satellite signals to twin PVR receivers
• Can inject modulated RF signal from any local device (SAT receiver, DVD player etc.) into a whole home TV system
• For surface or flush mounting
• Loss in FM/TV band: 3.5 dB
• Loss of SAT1 output: 3.5 dB; SAT2 output: 3 dB
• Can inject modulated RF signal from any local device (SAT receiver, DVD player etc.) into a whole home TV system
• For surface or flush mounting
• Loss in FM/TV band: 3.5 dB
• Loss of SAT1 output: 3.5 dB; SAT2 output: 3 dB
The R70501 SA-51 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed on the input of the SMATV system, the device amplifies and equalizes the signals before further distribution.
• Amplifier with power supply designed for 5-input multiswitches
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
• High output level
• Die-cast housing providing high screening efficiency (class A)
• Power supply for other active devices in the distribution network
• Power supply for a DVB-T preamplifier
The R70511 amplifier is designed for use in SMATV systems based on 5-input multiswitches. It has four satellite inputs and DVB-T/DAB/FM (Terr.TV) input. Placed at the input of an SMATV system, the device amplifies and equalizes the signals before further distribution (four SAT IF signals - polarizat...
The splitter is used in multiswitch systems to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals.
• Sub-network partition (two branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• Available optional tap versions with 10, 15, 20 dB attenuation
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The tap is used in multiswitch installations to extend the signal bus consisting of four satellite lines (carrying signals from a Quatro LNB) and terrestrial line with DVB-T, DAB, FM signals. The tap is equipped with DC-transition switch that in "ON" position runs current through "H" paths to both b...
The splitter is used in multiswitch installations to extend the signal bus, consisting of four satellite lines that carry signals from a Quatro LNB and terrestrial line with DVB-T, DAB, FM signals, into four branches/subnetworks. The device is equipped with two DC-transition switches that in "ON" po...
• Sub-network partition (4 branches)
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
• High screening efficiency
• Replaces 5 individual TV/SAT splitters
• Optionally switched-on DC transition
The splitter is used in multiswitch installations to extend 9-cable systems into two subnetworks (18 outputs). The splitter is equipped with DC-pass switch that in "ON" position runs current through "H" lines to both branches. In "OFF" position it takes place only within one branch.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary with lower attenuation and the secondary with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of signal levels in ...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.7 dB and 10 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with optionally switched-off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the main (pass-through) branch with low attenuation and the tap branch with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for equalization of...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.2 dB and 15 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1.2 dB and 15 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The tap is used in multiswitch installations to divide 9-cable systems into two subnetworks (18 outputs), the primary (pass-through) branch with low attenuation and the secondary (tap) branch with higher attenuation. The application of the taps in large, unsymmetrical multiswitch systems allows for ...
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1 dB and 20 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into two subnetworks with different signal levels (average attenuation of 1 dB and 20 dB)
• Replaces 9 individual TV/SAT taps
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
The splitter is used in multiswitch installations to extend 9-cable systems into four subnetworks (36 outputs). The splitter is equipped with DC-pass switches that in "ON" position run current through "H" lines to selected branches.
• 9-cable system (8x SAT + terrestrial TV/Radio)
• Divides the system into four subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
• Divides the system into four subnetworks
• Replaces 9 individual TV/SAT splitters
• Equipped with switched-on/off DC pass
• Die-cast housing guarantying high screening efficiency (class A)
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems it is necessary to use splitters and taps of SD-5XX serie...
• Radial structure
• 8 outputs
• Cable loss correction
• Groups of outlets with different output levels
• Isolation between inputs better than 30 dB
• Possibility of using terrestrial TV preamplifier
• Built-in power supply
• Die-cast housing with high screening efficiency (class A)
• 8 outputs
• Cable loss correction
• Groups of outlets with different output levels
• Isolation between inputs better than 30 dB
• Possibility of using terrestrial TV preamplifier
• Built-in power supply
• Die-cast housing with high screening efficiency (class A)
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems it is necessary to use splitters and taps of SD-5XX serie...
• High class device for small SMATV systems
• For distribution of satellite and terrestrial TV, FM and DAB radio
• 12 independent outputs
• Die-cast housing with high screening efficiency
• Cable loss correction
• Groups of outlets with different output levels
• High isolation between inputs and between outputs
• Possibility of using terrestrial TV preamplifier
• 4-year warranty
• For distribution of satellite and terrestrial TV, FM and DAB radio
• 12 independent outputs
• Die-cast housing with high screening efficiency
• Cable loss correction
• Groups of outlets with different output levels
• High isolation between inputs and between outputs
• Possibility of using terrestrial TV preamplifier
• 4-year warranty
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems it is necessary to use splitters and taps of SD-5XX serie...
• Radial structure
• Cable loss correction
• Groups of outlets with different output levels
• Isolation between inputs better than 30dB
• Possibility of using terrestrial TV preamplifier (12 VDC)
• Built-in power supply
• Die-cast housing with high screening efficiency (class A)
• Cable loss correction
• Groups of outlets with different output levels
• Isolation between inputs better than 30dB
• Possibility of using terrestrial TV preamplifier (12 VDC)
• Built-in power supply
• Die-cast housing with high screening efficiency (class A)
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV/DAB/FM signals. The multiswitches have to work inside buildings. In the case of larger systems it is necessary to use splitters and taps of SD-5X...
• Radial structure
• 24 outputs
• Cable loss correction
• Groups of outlets with different output levels
• Isolation between inputs better than 30 dB
• Possibility of using terrestrial TV preamplifier
• Built-in power supply
• Die-cast housing with high screening efficiency (class A)
• 24 outputs
• Cable loss correction
• Groups of outlets with different output levels
• Isolation between inputs better than 30 dB
• Possibility of using terrestrial TV preamplifier
• Built-in power supply
• Die-cast housing with high screening efficiency (class A)
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems it is necessary to use splitters and taps of SD-5XX serie...
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
• MV series for SMATV systems
• Signals fom one satellite + DVB-T
• 8 outputs
• Scalability
• Top quality
• Die-cast housing provides high screening efficiency
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
• Groups of outputs with different output levels
• Built-in compensation of cable attenuation
• Remote or local power supply
• Exceptional reliability
• Free SatNet software for network planning
• Signals fom one satellite + DVB-T
• 8 outputs
• Scalability
• Top quality
• Die-cast housing provides high screening efficiency
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
• Groups of outputs with different output levels
• Built-in compensation of cable attenuation
• Remote or local power supply
• Exceptional reliability
• Free SatNet software for network planning
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
Multiswitches from MV series are dedicated for medium and bigger SMATV systems, however they can also be used in smaller installations.
Multiswitches from MV series are dedicated for medium and large SMATV systems with distribution of SAT IF and terrestrial TV signals, however they can also be used in smaller installations.
• Signals from one satellite + DVB-T/DAB/FM
• 32 outputs
• Small size
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
• 32 outputs
• Small size
• High stability of parameters (switches instead of potentiometers)
• High output level – possibility of using subscriber cables up to 80 m
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems with multiple multiswitches, it is necessary to use split...
• 9/8 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
9/12 multiswitch for small and medium-size SMATV systems, with active terrestrial path and automatic powering of RF preamplifier.
• 9/12 multiswitch for radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housings guarantying high screening efficiency (class A)
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems with multiple multiswitches, it is necessary to use split...
• 9/16 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems with multiple multiswitches, it is necessary to use split...
• 9/24 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
Radial multiswitches of MR series are dedicated for small and medium (4-70 outlets) SMATV systems with distribution of the first SAT IF and terrestrial TV signals. The multiswitches have to work inside buildings. In the case of larger systems with multiple multiswitches, it is necessary to use split...
• 9/32 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path (47-790 MHz) with LTE filter
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path (47-790 MHz) with LTE filter
• Passive terrestrial TV path (5-862 MHz)
• Built-in power supply
• Die-cast housing guarantying high screening efficiency (class A)
Multiswitch designed for cooperation with two Quatro LNBs and terrestrial TV antenna, for applications in medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/8 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
Multiswitch designed for cooperation with two Quatro LNBs and terrestrial TV antenna, for applications in medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/12 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
Multiswitch designed for cooperation with two Quatro LNBs and terrestrial TV antenna, for applications in medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/16 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
Terra multiswitches of MV series have been designed for medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/24 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency
Terra multiswitches of MV series have been designed for medium and large 9-cable SMATV systems, also in multi-staircase buildings (with division into subnetworks).
• 9/32 multiswitch for systems with radial topology
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
• Built-in cable loss correction
• Groups of outputs with different output levels
• Isolation between inputs better than 30 dB
• Powering of optional terrestrial TV preamplifier
• Active terrestrial TV path with LTE filter (47-790 MHz)
• Die-cast housing guarantying high screening efficiency (class A)
The SA-91L R70901 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals.
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components: LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
The SA-91DL R70911 amplifier is designed for amplification of the first SAT IF and terrestrial DVB-T/Radio signals within SMATV systems built with 9-input multiswitches. It has 8 satellite inputs and DVB-T/Radio input and allows for equalization of the input signals. The device is used as interstage...
• Amplification and equalization of SAT IF signals (8 polarization-band combinations)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components (when used together with R71465 PSU): LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
• Amplification of DVB-T/Radio signals
• Blocking of LTE signals (signals above 790 MHz)
• Built-in compensation of the increased loss of signals at higher frequencies in the distribution cables
• Power supply for other system components (when used together with R71465 PSU): LNBs, multiswitches, DVB-T preamplifiers, other SAT amplifiers
• Die-cast housing guarantying high screening efficiency (class A)
The SIGNAL 18 VDC / 1 A R71451 power supply is dedicated for multiswitches from the MRP series. The cable is terminated with F plug.
The SIGNAL 2A 18 VDC R71455 power supply is intended for powering MRP and TERRA MV/MS multiswitches. The output is terminated with F male connector.
Small and powerful AC/DC adapter dedicated for multiswitch systems. The power supply does not have a separate ON/OFF switch.
The power supply is dedicated for Terra Digital SCR multiswitch systems. The output F-male connector provides 20 VDC voltage (+ at the tip) with current capacity 2 A. The input voltage can be within 180 to 240 VAC range (50 Hz).
Side assembly component ZMB-1-800 R77105 is used for mounting devices vertically in a RACK cabinet with detachable side walls. The component is mounted to the front and rear RACK rail (on the left or right side of the cabinet). The component is suitable for mounting in standing 600 x 800 mm RACK cab...
The ZMC-1 R77210 component is a EURO TH35 rail with a length of 380 mm, receding by 100 mm in relation to the front of the RACK cabinet. The element is made of hard aluminum (PA11) sheet with 2 mm thickness.
• Allows to mount different types of equipment in RACK cabinet
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
• Front installation
• EURO TH35 rail included
• Dedicated for Terra channel DVB-T amplifiers
• Material: alluminium PA11
• Colour: black
The ZMC-2 R77220 component is used in a situation where, next to a few devices (length of the TH35 rail is 190 mm) mounted on the EURO rail, other devices should be mounted vertically. The component has a width of 180 mm and a height of 170 mm. It is made of hard PA11 aluminum sheet with a thickness...
Aside a short (190 mm) EURO rail, the ZMC-3 R77230 component of the RACK board vertical mounting system has a panel with 12 holes for keystone modules. This arrangement gives the possibility of better space management in the RACK cabinet when only few devices should be mounted on the EURO rail, wher...
The ZMC-4 R77240 component of the RACK board system has a 380x170 mm panel retracted by 100 mm from the front of the RACK cabinet. The panel is made of hard PA11 aluminum sheet with a thickness of 1.5 mm. Thanks to this, it has sufficient rigidity and at the same time aluminum allows for easy drilli...
Front assembly component ZMD-1 R77311 is composed of two elements. It has holes dedicated for mounting TERRA MR-xxx/MV-xxx multiswitches.
• For mounting series of Terra multiswitches of MR/MV series in RACK cabinets
• Front-mounted
• Made of PA11 aluminum
• Color: black
• Front-mounted
• Made of PA11 aluminum
• Color: black
Front assembly component ZMD-2 R77322 is composed of two elements. It is used to mount the devices in a RACK cabinet vertically, 100 mm behind the front 19" rails. This is a universal model. The holes needed to mount a device should be drilled according to needs. The set includes eight screws with c...
The ZMD-35 R77335 component is a EURO TH35 rail with length of 430 mm recessed by 100 mm from the front of the RACK cabinet. The component is made of hard PA11 aluminum sheet with thickness of 2 mm. The ZMD-35 can be loaded with evenly distributed devices with a total weight of 12 kg. The set includ...
The KWM-510 M5 x 10 set is used to mount a device to the ZMB-1-800 R77105, ZMC-2 R77220, ZMC-4 R77240, ZMD-1 R77311, or ZMD-2 R77322 assembly component. The ZMB-1-800 R77105 and ZMD-1 R77311 components include such sets.
The SRM522 R80522 cascadable single-cable multiswitch allows for distribution of DVB-S/S2 signals from one satellite and terrestrial signals (DVB-T, DAB/FM radio). The satellite signals can be distributed by means of dSCR technology (digital Satellite Cable Router), requiring only one coaxial line a...
• New! Multiswitch for systems with Unicable receivers
• Signals from a Wideband LNB are fed only via two cables from one satellite
• Compatibility with quatro LNBs (after reprogramming with PC102W programmer)
• Full compliance with EN50494 - Unicable I, 8 UBs (User Bands)
• Full compliance with EN50607 - Unicable II, 32 UBs
• Possibility of using receivers compliant with EN50607 and EN50494 in the same distribution network
• Static mode: IF/IF converter
• Dynamic mode: distribution of signals to up to 32 receivers
• Signals from a Wideband LNB are fed only via two cables from one satellite
• Compatibility with quatro LNBs (after reprogramming with PC102W programmer)
• Full compliance with EN50494 - Unicable I, 8 UBs (User Bands)
• Full compliance with EN50607 - Unicable II, 32 UBs
• Possibility of using receivers compliant with EN50607 and EN50494 in the same distribution network
• Static mode: IF/IF converter
• Dynamic mode: distribution of signals to up to 32 receivers
The SRM-523 R80523 cascadable single-cable multiswitch allows for distribution of DVB-S/S2 signals from one satellite and terrestrial signals (DVB-T, DAB/FM radio). The satellite signals can be distributed by means of dSCR technology (digital Satellite Cable Router), requiring only one coaxial line ...
• Multiswitch for installations based on Unicable I/II receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC circuit in SAT path
• Quattro LNB compatible
• • Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands)
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands)
• Mixing of EN50607 and EN50494 receivers
• In dynamic mode signal split up to 32 receivers
• Number of outputs: 2xdSCR/Legacy
• Built-in AGC circuit in SAT path
• Quattro LNB compatible
• • Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands)
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands)
• Mixing of EN50607 and EN50494 receivers
• In dynamic mode signal split up to 32 receivers
The programmable SRM-524 R80524 multiswitch has one pair of Legacy /dSCR + DTT outputs. The outputs allow in dSCR mode for independent operation of up to 32 SAT dSCR receivers/STBs, fed in via two coaxial cables (16+16, default configuration) or via one coaxial cable (32 from one output in Unicable ...
The SRM-543 R80543 cascadable single-cable multiswitch allows for distribution of DVB-S/S2 signals from one satellite and terrestrial signals (DVB-T, DAB/FM radio). The satellite signals can be distributed by means of dSCR technology (digital Satellite Cable Router), requiring only one coaxial line ...
The programmable SRM-544 R80544 multiswitch has two pairs of Legacy /dSCR + DTT outputs. The outputs allow in dSCR mode for independent operation of up to 32 SAT dSCR receivers/STBs, fed in via two coaxial cables (16+16, default configuration) or via one coaxial cable (32 from one output in Unicable...
TERRA SA004 R80550 line amplifier is dedicated for Wideband systems distributing SAT IF. It ensures compensation of signal loss in long cables in the distribution system, along with the signal equalization, to minimize the effect of the increase of cable attenuation with frequency.
The PC102W R80561 programmer is designed for configuring and troubleshooting SAT IF distribution systems built on dSCR multiswitcheswww.dipol.com.pl/6697.htm. With wireless access to the device from any platform (tablet, smartphone, laptop, PC), it is easy to configure SMATV systems based on dSCR ...
The programmable SRM-564 R80564 multiswitch has three pairs of Legacy /dSCR +DTT outputs. The single-cable dSCR/Unicable mode enables distribution from each pair of up to 32 independent satellite channels (Unicable II) plus terrestrial signals with the use of ordinary satellite splitters operating i...
• Multiswitch designed to work with Unicable I/II receivers
• Number of outputs: 6xdSCR/Legacy
• Built-in AGC in RTV/SAT circuit
• Built-in LNB switch for selecting wideband or quatro LNB - reduced number of input cables
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
• In dynamic mode, allows to split signal do max. 32 receivers
• Number of outputs: 6xdSCR/Legacy
• Built-in AGC in RTV/SAT circuit
• Built-in LNB switch for selecting wideband or quatro LNB - reduced number of input cables
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
• In dynamic mode, allows to split signal do max. 32 receivers
SRM-581 R80581 single-cable cascadable multiswitch allows for distribution of DVB-S/S2 signals from one satellite and terrestrial signals (DVB-T, DAB+/FM radio). The satellite signals can be distributed by means of dSCR technology (digital Satellite Cable Router), requiring only one coaxial line and...
• New! dSCR/Unicable multiswitch
• Compatible with Wide Band LNBs
• Only four coaxial cables for two satellite positions
• 4 pairs of Legacy/Unicable outputs
• Capacity up to 128 receivers
• AGC system ensuring stable 84 dBμV output level
• Compatible with quatro LNBs (after reprogramming)
• A-class shielding
• Compatible with Wide Band LNBs
• Only four coaxial cables for two satellite positions
• 4 pairs of Legacy/Unicable outputs
• Capacity up to 128 receivers
• AGC system ensuring stable 84 dBμV output level
• Compatible with quatro LNBs (after reprogramming)
• A-class shielding
The programmable SRM-584 R80580 multiswitch has four pairs of Legacy /dSCR + DTT outputs. In dSCR mode, the outputs allow for independent operation of up to 32 SAT dSCR receivers/STBs, fed in via two coaxial cables (16+16, default configuration) or via one coaxial cable (32 from one output in Unicab...
• Multiswitch compatible with Unicable I/II tuners
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC circuit
• Active terrestial path
• Built-in LNB-type switch: Quatro and WideBand
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
• Number of outputs: 8xdSCR/Legacy
• Built-in AGC circuit
• Active terrestial path
• Built-in LNB-type switch: Quatro and WideBand
• Full compatibility with EN50494 standard - Unicable I - 8 UBs (User Bands) from each of the 4 pairs
• Full compatibility with EN50607 - Unicable II - 32 UBs (User Bands) from each of the 3 pairs
• Possibility of using receivers supporting EN50607 and EN50494 standards in the same subsystem (8 x EN50494 + 24 x EN50607)
Terra's HS-004T house amplifier is dedicated for use in shared antenna systems with several tens outlets.
• Integrated filter for LTE 700 signal
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• 39 dB gain in the FM and BIII bands; 44 dB gain in UHF band
• Switching between gain stages using discrete switches
• Additional, smooth gain control with potentiometers
• Smooth slope adjustment for the gain pattern
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
TF005 is used to filter unwanted signals in the 700 MHz band (694 - 862 MHz frequencies) intended for data transmission services (LTE).
• Rejection of LTE 700 band (> 694 MHz)
• Very steep slope, just at the band rejection limit
• DC pass (max: 24 V/100 mA) - can be used in an antenna system with an external amplifier
• Very steep slope, just at the band rejection limit
• DC pass (max: 24 V/100 mA) - can be used in an antenna system with an external amplifier
The TF001 mast mount filter is used to filter unwanted signals in the 700 MHz band intended for data transmission services (LTE).
• Rejection of LTE 700 band (> 694 MHz)
• Very steep slope, just at the band rejection limit
• Mounting on a mast, resistant to weather conditions
• DC pass (max: 24 V/100 mA) - can be used in an antenna system with an external amplifier.
• Very steep slope, just at the band rejection limit
• Mounting on a mast, resistant to weather conditions
• DC pass (max: 24 V/100 mA) - can be used in an antenna system with an external amplifier.
The Terra TF001 filter is used in SMATV systems - mounted on a mast just behind the antenna set.
• Rejection of LTE 240-470 MHz band and 703-3000 MHz
• Very steep slope, just at the band rejection limit
• Mounting on a mast, resistant to weather conditions
• DC pass (max: 24 V/100 mA) – can be used in an antenna system with an external amplifier
• Very steep slope, just at the band rejection limit
• Mounting on a mast, resistant to weather conditions
• DC pass (max: 24 V/100 mA) – can be used in an antenna system with an external amplifier
Masthead antenna amplifier Terra AB011T is dedicated for outdoor applications in individual antenna systems and small MATV systems distributing the signal to a dozen or so outlets.
• Power supply 4.5-12V 60mA
• LTE signal attenuation (> 694 MHz)
• 26 dB gain in the 470-694 MHz band
• Gain control (switch)
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation (> 694 MHz)
• 26 dB gain in the 470-694 MHz band
• Gain control (switch)
• Small size cast metal case put into compact size plastic housing
The FM/TV house amplifier Terra MA-049T is dedicated for individual antenna systems and small SMATV systems distributing the signal to several outlets, e.g. in single family houses.
• Integrated filter LTE 700 signal attenuation
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit.
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit.
Terra's MA050T house amplifier is dedicated for use in shared antenna systems with several outlets, for example in single- or multi-family buildings.
• Built-in cable-loss correction
• Integrated filter LTE 700 signal attenuation
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
• Integrated filter LTE 700 signal attenuation
• 30 dB gain in the FM and VHF bands; 34 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/60 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit
Terra’s MA-075T FM/TV house amplifier is dedicated to individual antenna systems and small SMATV systems distributing the signal to tens of outlets.
• Integrated filter LTE 700 signal attenuation
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit.
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit.
Terra’s MA-076T TERRA FM/TV house amplifier is dedicated large SMATV systems.
• Integrated filter LTE 700 signal attenuation
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit.
• Inputs: FM, VHF, 2 x UHF
• 35 dB gain in the FM and VHF bands; 47 dB gain in UHF band
• Switchable (ON/OFF) 12 VDC/100 mA power supply to a preamplifier
• Die-cast housing for highly efficient screening to prevent the penetration of interfering signals into the unit.
Masthead antenna amplifier Terra MA080T R81080 is dedicated for outdoor applications in individual antenna systems and small MATV systems distributing the signal to tens of outlets.
• Power supply 12V 60mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer•
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer•
• Small size cast metal case put into compact size plastic housing
Masthead antenna amplifier Terra MA081L is dedicated for outdoor applications in individual antenna systems and small MATV systems distributing the signal to tens of outlets.
• Power supply 12V 60mA
• LTE signal attenuation LTE 700 (> 694MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer•
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer•
• Small size cast metal case put into compact size plastic housing
Masthead antenna amplifier Terra MA082T is dedicated for outdoor applications in individual antenna systems and small MATV systems distributing the signal to tens of outlets.
• Power supply 12V 60mA
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer•
• Small size cast metal case put into compact size plastic housing
• LTE signal attenuation LTE 700 (> 694 MHz)
• 20 dB gain in the FM, VHF band, and 30 dB in UHF band
• Gain control with a potentiometer•
• Small size cast metal case put into compact size plastic housing
The high-power HA-131T house amplifier is designed to amplify radio and TV signals. It is characterized by a high gain of 36 dB.
• 36 dB gain in the 88-694 MHz band
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
• LTE 700 signal attenuation: (> 694 MHz)
• Die-cast housing
• Smooth gain control
• Smooth slope adjustment for the gain pattern
• Built-in test input -20 dB
• Built-in test output -30 dB
The FTTH OD-012 H optical receiver (SC/APC optical connector) is designed to convert optical signals into electrical signals in the 47-862/1006 MHz band.
• Interface: optical: SC/APC; RF output: F female
• Output bandwidth: 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on the level of the optical signal
• Open housing provides high shielding efficiency preventing interfering signals from penetrating inside the device
• Compact dimensions
• Output bandwidth: 47-862/1006 MHz
• Microprocessor-based AGC (automatic gain control) based on the level of the optical signal
• Open housing provides high shielding efficiency preventing interfering signals from penetrating inside the device
• Compact dimensions
The sdi416 IPTV streamer is a device that enables the conversion of DVB-S2X/S2/S signals to IP multicast streams at a maximum rate of 1.2 Gbps.
• Conversion of DVB-S2X/S2/S signals (uncoded programs) to IP stream
• Support for single-cable standard dSCR/Unicable (EN50494, EN50607)
• Conversion of about 200 programs from 16 satellite transponders (1 panel)
• USB connector for playback of source material in .ts format
• IP multicast stream at maximum rate of 1.2 Gbps – low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
• Support for single-cable standard dSCR/Unicable (EN50494, EN50607)
• Conversion of about 200 programs from 16 satellite transponders (1 panel)
• USB connector for playback of source material in .ts format
• IP multicast stream at maximum rate of 1.2 Gbps – low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
The sti441C streamer enables conversion of DVB-T/T2/C signals from 4 multiplexes to IP standard (multicast) with a maximum throughput of 200 Mbps.
• Conversion of 4xDVB-T/T2/C signals to IP stream
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
• Conversion of 4 digital multiplexes (1 panel)
• USB connector for playback of source material in .ts format
• Built-in 2 CI slots for decoding encrypted channels
• IP multicast stream with maximum bandwidth of 200 Mbps – low use of LAN resources
• Possibility to create thematic (or e.g. language) lists of channels automatically detected by receivers
• Possibility of watching TV on PCs and laptops with free software installed
• Receivers equipped with recording functions and other multimedia functions (Youtube, etc.)
• Use of twisted-pair cable as a transmission medium
• Easy transmission of TV signal over long distances (fiber optic cable)
The sdi482c IPTV streamer is a device that enables the conversion of a DVB-S2X/S2/S signal (coded channels) into an IP multicast stream with a maximum bandwidth of 0.6 Gbps.
• Conversion of DVB-S2X/S2/S signals (coded programs) to IP stream
• 2 CI slots
• Reception of DVB-S2X/S2/S signal from 8 satellite transponders
• Support single-cable dSCR/Unicable standard (EN50494, EN50607)
• USB connector enabling playback of source material in .ts format
• IP multicast stream with a maximum bandwidth of 0.6 Gbps - low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
• 2 CI slots
• Reception of DVB-S2X/S2/S signal from 8 satellite transponders
• Support single-cable dSCR/Unicable standard (EN50494, EN50607)
• USB connector enabling playback of source material in .ts format
• IP multicast stream with a maximum bandwidth of 0.6 Gbps - low use of LAN resources
• Possibility to watch TV on PCs and laptops with free software installed
The mhi430 3xHDMI - IP encoder enables the conversion of signals from 3 HDMI sources to an IP multicast stream.
• Converts 3 HDMI sources to three IP streams,
• H.264 encoded with individual multicast addresses ,
• Possibility to watch TV on PCs and laptops,
• Unique SAP/SDP protocol enabling fully automatic configuration of TERRA IPTV receivers,
• IP multicast stream – saving LAN resources.
• H.264 encoded with individual multicast addresses ,
• Possibility to watch TV on PCs and laptops,
• Unique SAP/SDP protocol enabling fully automatic configuration of TERRA IPTV receivers,
• IP multicast stream – saving LAN resources.
The mix440 trans modulator enables conversion of IP streams of up to 200 Mbps in UDP/RTP technology to 4 DVB-T COFDM MUXes.
• The modulator enables conversion of IP stream (200 Mbps) to 4 DVB-T MUXes,
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-T COFDM standard,
• USB connection enabling playback of source material in .ts format,
• Possibility of introducing into signal from IP cameras to the DVB-T system,
• 4 DVB-T multiplexes at the output,
• Supports H.264 and H.265 codecs,
• Web-based management,
• AGC function (automatic control of signal gain).
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-T COFDM standard,
• USB connection enabling playback of source material in .ts format,
• Possibility of introducing into signal from IP cameras to the DVB-T system,
• 4 DVB-T multiplexes at the output,
• Supports H.264 and H.265 codecs,
• Web-based management,
• AGC function (automatic control of signal gain).
The VSA N5 WiFi 4K H.265/HEVC IPTV Digital Receiver enables reception of TV signals on IP-based broadband networks broadcast in MPEG-2, H.264 and H.265/HEVC technologies, both in high definition 4K UHD with HDR.
• Receiver dedicated for IPTV systems
• Resolution: 4K/p60 HDR
• HDMI CEC function support
• PAL upscaling to 720p, 1080i, 1080p
• Functional and clear Electronic Program Guide (EPG)
• Separate lists of favorite, TV, and radio channels
• Recording option, access to selected web services (YouTube etc),
• Support for teletext and subtitles
• Support for MPEG-2 and MPEG-4 AVC/H.264
• Built-in multimedia player (including HD movies, music, pictures)
• Resolution: 4K/p60 HDR
• HDMI CEC function support
• PAL upscaling to 720p, 1080i, 1080p
• Functional and clear Electronic Program Guide (EPG)
• Separate lists of favorite, TV, and radio channels
• Recording option, access to selected web services (YouTube etc),
• Support for teletext and subtitles
• Support for MPEG-2 and MPEG-4 AVC/H.264
• Built-in multimedia player (including HD movies, music, pictures)
The 8xDVB-S/S2 (8PSK, QPSK) - 4xDVB-T (COFDM) tdx441 FTA transmodulator allows the conversion of DVB-S/S2 signals from 8 satellite transponders to 4 DVB-T MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 4 DVB-T COFDM multiplexes,
• FTA uncoded programs,
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes,
• Channel selection and filtering of unnecessary services in the digital stream,
• Compatible with dSCR/Unicable multiswitch series,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
• FTA uncoded programs,
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes,
• Channel selection and filtering of unnecessary services in the digital stream,
• Compatible with dSCR/Unicable multiswitch series,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
The 2xDVB-T/T2/C - 2xDVB-T (COFDM) ttx420 FTA transmodulator enables the conversion of DVB-T/T2/C signals from 2 MUXes to 2 DVB-T COFDM MUXes.
• Conversion of DVB-T/T2/C signal from 2 MUXex to 2 DVB-T COFDM multiplexes,
• Selectable operation mode: transparent or multiplexing,
• Channel selection and filtering of unnecessary services in the digital stream,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
• Selectable operation mode: transparent or multiplexing,
• Channel selection and filtering of unnecessary services in the digital stream,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
The tdx420 2xDVB-S/S2 (8PSK, QPSK) - 2xDVB-T (COFDM) FTA transmodulator enables the conversion of DVB-S/S2 signals from 2 satellite transponders to 2 DVB-T MUXes.
• Conversion of DVB-S/S2 signals to DVB-T COFDM standard,
• 2 SAT transponders for 2 DVB-T MUXes,
• Unscrambled FTA programs,
• Possibility to create one DVB-T MUX from two SAT transponders,
• Channel selection and filtering of unnecessary services in the digital stream,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
• 2 SAT transponders for 2 DVB-T MUXes,
• Unscrambled FTA programs,
• Possibility to create one DVB-T MUX from two SAT transponders,
• Channel selection and filtering of unnecessary services in the digital stream,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
The tdx420c 2xDVB-S/S2 (8PSK, QPSK) - 2xDVB-T (COFDM) transmodulator with a double CI slot enables the conversion of DVB-S/S2 signals from 2 satellite transponders to 2 DVB-T MUXes.
• Conversion of DVB-S/S2 signals to DVB-T COFDM standard,
• Two satellite transponders to 2 DVB-T MUXes,
• Possibility to create one DVB-T multiplex from two different satellite transponders,
• Channel selection and filtering of unnecessary services in the digital stream,
• Control via RJ-45 port, for a much simpler installation procedure,
• Two CI ports (multi-channel descrambling),
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
• Two satellite transponders to 2 DVB-T MUXes,
• Possibility to create one DVB-T multiplex from two different satellite transponders,
• Channel selection and filtering of unnecessary services in the digital stream,
• Control via RJ-45 port, for a much simpler installation procedure,
• Two CI ports (multi-channel descrambling),
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
The 8xDVB-S/S2 (8PSK, QPSK) - 8xDVB-T (COFDM) tdx481 FTA transmodulator allows the conversion of DVB-S/S2 signals from 8 satellite transponders to 8 DVB-T MUXes.
• DVB-S/S2 signal conversion from 8 satellite transponders to 8 DVB-T COFDM multiplexes,
• FTA uncoded programs,
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes,
• Channel selection and filtering of unnecessary services in the digital stream,
• Compatible with dSCR/Unicable multiswitch series,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
• FTA uncoded programs,
• Reception of 8 satellite transponders and conversion to any 8 DVB-T multiplexes,
• Channel selection and filtering of unnecessary services in the digital stream,
• Compatible with dSCR/Unicable multiswitch series,
• Control via RJ-45 port, for a much simpler installation procedure,
• Web-based management,
• Reading history of events (logs) from the panel,
• AGC function (automatic control of signal gain).
The mix440 trans modulator enables conversion of IP streams of up to 200 Mbps in UDP/RTP technology to 4 DVB-C QAM MUXes.
• The modulator enables conversion of IP stream (200 Mbps) to 4 DVB-C MUXes,
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-C QAM standard,
• USB connection enabling playback of source material in .ts format,
• Possibility of introducing into signal from IP cameras to the DVB-C system,
• 4 DVB-C multiplexes at the output,
• Supports H.264 and H.265 codecs,
• Web-based management,
• AGC function (automatic control of signal gain).
• UDP/RTP support for unicast/multicast transmissions (SPTS/MPTS) to DVB-C QAM standard,
• USB connection enabling playback of source material in .ts format,
• Possibility of introducing into signal from IP cameras to the DVB-C system,
• 4 DVB-C multiplexes at the output,
• Supports H.264 and H.265 codecs,
• Web-based management,
• AGC function (automatic control of signal gain).
