EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
The APWK-LED is an emergency exit button designed for use in access control (AC) and intrusion and hold-up alarm (IHA) systems.
• Supply voltage: 12–24 V DC
• Audible alarm modes: continuous / intermittent / silent
• Volume control
• Visual indication
• Device status indicator
• Lock/reset: mechanical
• Relay outputs: 3 x NO/NC (max. load 3 A)
• Mounting method: surface-mounted / flush-mounted
• Audible alarm modes: continuous / intermittent / silent
• Volume control
• Visual indication
• Device status indicator
• Lock/reset: mechanical
• Relay outputs: 3 x NO/NC (max. load 3 A)
• Mounting method: surface-mounted / flush-mounted
HARTTE's F12R-C reversing electric door strike from the F series is a modern solution dedicated to cooperation with access control systems.
• Powered by DC or AC 10 - 14 V
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 200 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 200 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
HARTTE's F00U-C electric door strike from the F series is a modern solution dedicated to cooperation with access control systems.
• Powered by DC or AC/DC 11 - 24 V
• Operational type NC (normally closed)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• Current consumption AC: 200 - 390 mA, DC: 280 - 560 mA
• Adapted for continuous operation at 12 V/DC
• Operating temperature: -25°C to +50°C
• Operational type NC (normally closed)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• Current consumption AC: 200 - 390 mA, DC: 280 - 560 mA
• Adapted for continuous operation at 12 V/DC
• Operating temperature: -25°C to +50°C
HARTTE's F24R-C reversing electric door strike from the F series is a modern solution dedicated to cooperation with access control systems.
• Powered by DC or AC 20 - 26 V
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical resistance - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 100 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
• NO operation type (normally open)
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical resistance - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable up to 3 mm in radial shape
• Symmetric design
• DC current consumption: 100 mA
• Capable of continuous operation (100% ED)
• Operating temperature: -25°C to +50°C
The HARTTE XS12R-C XS-C series electric door strike is used for remote wired opening of doors.
• Powered by 12 V/DC
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
DS-K1T502DBWX-C is an access control videoterminal equipped with a keypad and transponder reader in Mifare, Desfire, Felica, Bluetooth standards.
• Built-in camera: 2 MP
• Two-way audio and video communication
• Compatible with Hikvision IP video intercoms
• Built-in Mifare, Desfire, Felica, Bluetooth reader
• Authentication: RFID, RFID + PIN, RFID and PIN, QR, Bluetooth
• Communication interfaces: RJ-45, RS-485, Wiegand, Wi-Fi, Bluetooth
• Communication protocols: TCP/IP, RS-485, Wiegand (output) (W26/W34)
• Input interface: 1 x alarm input, 1 x reed switch, 1 x exit button
• Output interfaces: 1 x alarm output, 1 x door strike/jumper output
• SIP servers supported: Brekeke, miniSipServer, FreePBX, Asterisk, 3CX, ELASTIX, PB
• Supports up to 100,000 cards and 300,000 events
• Compatible with Hik-Connect app
• Built-in call button
• Built-in speaker and microphone
• Detection of detachment tampering
• AP mode supported
• Manageable via iVMS-4200, HikConnect, browser
• Support for microSD cards up to 256 GB
• Wall mounting
• Protection degree: IP65, IK09
• Two-way audio and video communication
• Compatible with Hikvision IP video intercoms
• Built-in Mifare, Desfire, Felica, Bluetooth reader
• Authentication: RFID, RFID + PIN, RFID and PIN, QR, Bluetooth
• Communication interfaces: RJ-45, RS-485, Wiegand, Wi-Fi, Bluetooth
• Communication protocols: TCP/IP, RS-485, Wiegand (output) (W26/W34)
• Input interface: 1 x alarm input, 1 x reed switch, 1 x exit button
• Output interfaces: 1 x alarm output, 1 x door strike/jumper output
• SIP servers supported: Brekeke, miniSipServer, FreePBX, Asterisk, 3CX, ELASTIX, PB
• Supports up to 100,000 cards and 300,000 events
• Compatible with Hik-Connect app
• Built-in call button
• Built-in speaker and microphone
• Detection of detachment tampering
• AP mode supported
• Manageable via iVMS-4200, HikConnect, browser
• Support for microSD cards up to 256 GB
• Wall mounting
• Protection degree: IP65, IK09
MG280S is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 2800 N (280 kg)
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 450/240 mA
• Dimensions: 250 × 49 × 25 mm
• Weight: 2.1 kg
• Surface mounting – indoor
• Holding force: 2800 N (280 kg)
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 450/240 mA
• Dimensions: 250 × 49 × 25 mm
• Weight: 2.1 kg
MG280ZL is a ZL-type mounting hardware dedicated to mounting MG280S and MG280SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG280S, MG280SR
• Compatible locks: MG280S, MG280SR
MG280L is an L-type mounting hardware dedicated to mounting MG280S and MG280SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG280S, MG280SR
• Compatible locks: MG280S, MG280SR
MG180SR is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 1800 N (180 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 380/190 mA
• Dimensions: 200 × 41.3 × 20.8 mm
• Weight: 1.2 kg
• Surface mounting – indoor
• Holding force: 1800 N (180 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 380/190 mA
• Dimensions: 200 × 41.3 × 20.8 mm
• Weight: 1.2 kg
