EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
DS-K1T502DBWX-C is an access control videoterminal equipped with a keypad and transponder reader in Mifare, Desfire, Felica, Bluetooth standards.
• Built-in camera: 2 MP
• Two-way audio and video communication
• Compatible with Hikvision IP video intercoms
• Built-in Mifare, Desfire, Felica, Bluetooth reader
• Authentication: RFID, RFID + PIN, RFID and PIN, QR, Bluetooth
• Communication interfaces: RJ-45, RS-485, Wiegand, Wi-Fi, Bluetooth
• Communication protocols: TCP/IP, RS-485, Wiegand (output) (W26/W34)
• Input interface: 1 x alarm input, 1 x reed switch, 1 x exit button
• Output interfaces: 1 x alarm output, 1 x door strike/jumper output
• SIP servers supported: Brekeke, miniSipServer, FreePBX, Asterisk, 3CX, ELASTIX, PB
• Supports up to 100,000 cards and 300,000 events
• Compatible with Hik-Connect app
• Built-in call button
• Built-in speaker and microphone
• Detection of detachment tampering
• AP mode supported
• Manageable via iVMS-4200, HikConnect, browser
• Support for microSD cards up to 256 GB
• Wall mounting
• Protection degree: IP65, IK09
• Two-way audio and video communication
• Compatible with Hikvision IP video intercoms
• Built-in Mifare, Desfire, Felica, Bluetooth reader
• Authentication: RFID, RFID + PIN, RFID and PIN, QR, Bluetooth
• Communication interfaces: RJ-45, RS-485, Wiegand, Wi-Fi, Bluetooth
• Communication protocols: TCP/IP, RS-485, Wiegand (output) (W26/W34)
• Input interface: 1 x alarm input, 1 x reed switch, 1 x exit button
• Output interfaces: 1 x alarm output, 1 x door strike/jumper output
• SIP servers supported: Brekeke, miniSipServer, FreePBX, Asterisk, 3CX, ELASTIX, PB
• Supports up to 100,000 cards and 300,000 events
• Compatible with Hik-Connect app
• Built-in call button
• Built-in speaker and microphone
• Detection of detachment tampering
• AP mode supported
• Manageable via iVMS-4200, HikConnect, browser
• Support for microSD cards up to 256 GB
• Wall mounting
• Protection degree: IP65, IK09
The BIRA EL1-001 electric door strike, from the EL1 series, is used for cooperation with access control systems such as intercoms, video intercoms, card readers, etc.
• Powered by 12 V AC
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• For left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 7-14 V
• Current consumption: 650 mA
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• For left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 7-14 V
• Current consumption: 650 mA
The BIRA EL1-005 electric door strike from the EL1 series, is used for cooperation with access control systems such as intercoms, video intercoms, card readers, etc.
• Powered by 12 V DC.
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 8-14 V
• Current consumption: 450 mA
• Operational type NC (normally closed)
• Mechanical strength - pressure 6000 N (600 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel striker
• Asymmetric design
• Voltage tolerance: 8-14 V
• Current consumption: 450 mA
The BIRA ES1-001 electric door strike, from the ES1 series, is used for cooperation with access control systems such as intercoms, video intercoms, card readers, etc.
• Powered by 12 V AC/DC DC or AC voltage
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 9 - 14 V
• AC/DC current consumption: 370/450 mA
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 9 - 14 V
• AC/DC current consumption: 370/450 mA
The BIRA BIRA HARTTE S12U electric door strike from the S series, is used for cooperation with access control systems such as intercoms, video intercoms, etc.
• Powered by 12 V AC/DC DC or AC voltage
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Steel hinge adjustable up to 4 mm
• Symmetric design
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
The Bira HARTTE S12UP electric self-sustaining door strike from S series is used with access control systems such as intercoms, video intercoms, etc.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3500 N (350 kg)
• Life span: 200,000 cycles
• For left- and right-hand doors
• Steel keeper/latch with 4 mm adjustment range
• Symmetric design
• Self-sustaining
• Energizing voltage range: 10-14 V
• Current consumption AC/DC: 410/570 mA
• NC (normally closed)
• Holding force: 3500 N (350 kg)
• Life span: 200,000 cycles
• For left- and right-hand doors
• Steel keeper/latch with 4 mm adjustment range
• Symmetric design
• Self-sustaining
• Energizing voltage range: 10-14 V
• Current consumption AC/DC: 410/570 mA
The BIRA HARTTE S12UW electric door strike from the S series, with an on-off switch, is used to work with access control systems such as intercoms, video intercoms, etc.
• Powered by 12 V AC/DC DC or AC voltage
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable catch up to 4 mm
• Symmetric design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
• Operational type NC (normally closed)
• Mechanical strength - thrust 3500 N (350 kg)
• Mechanical strength - opening cycles 200,000
• Suitable for left and right handed doors
• Adjustable catch up to 4 mm
• Symmetric design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current consumption: 410/570 mA
The BIRA HARTTE S12R S-series reversible electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 VDC
• NO (normally open, reversible)
• Continuous power on (100% ED)
• Holding force: 3500 N (350 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 4 mm
• Symmetrical design
• Voltage tolerance: 10-14 V
• DC current drawn: 190 mA
• NO (normally open, reversible)
• Continuous power on (100% ED)
• Holding force: 3500 N (350 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 4 mm
• Symmetrical design
• Voltage tolerance: 10-14 V
• DC current drawn: 190 mA
The BIRA HARTTE XS12U XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12UW XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
