English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
DS-K1T502DBWX-C is an access control videoterminal equipped with a keypad and transponder reader in Mifare, Desfire, Felica, Bluetooth standards.
• Built-in camera: 2 MP
• Two-way audio and video communication
• Compatible with Hikvision IP video intercoms
• Built-in Mifare, Desfire, Felica, Bluetooth reader
• Authentication: RFID, RFID + PIN, RFID and PIN, QR, Bluetooth
• Communication interfaces: RJ-45, RS-485, Wiegand, Wi-Fi, Bluetooth
• Communication protocols: TCP/IP, RS-485, Wiegand (output) (W26/W34)
• Input interface: 1 x alarm input, 1 x reed switch, 1 x exit button
• Output interfaces: 1 x alarm output, 1 x door strike/jumper output
• SIP servers supported: Brekeke, miniSipServer, FreePBX, Asterisk, 3CX, ELASTIX, PB
• Supports up to 100,000 cards and 300,000 events
• Compatible with Hik-Connect app
• Built-in call button
• Built-in speaker and microphone
• Detection of detachment tampering
• AP mode supported
• Manageable via iVMS-4200, HikConnect, browser
• Support for microSD cards up to 256 GB
• Wall mounting
• Protection degree: IP65, IK09
• Two-way audio and video communication
• Compatible with Hikvision IP video intercoms
• Built-in Mifare, Desfire, Felica, Bluetooth reader
• Authentication: RFID, RFID + PIN, RFID and PIN, QR, Bluetooth
• Communication interfaces: RJ-45, RS-485, Wiegand, Wi-Fi, Bluetooth
• Communication protocols: TCP/IP, RS-485, Wiegand (output) (W26/W34)
• Input interface: 1 x alarm input, 1 x reed switch, 1 x exit button
• Output interfaces: 1 x alarm output, 1 x door strike/jumper output
• SIP servers supported: Brekeke, miniSipServer, FreePBX, Asterisk, 3CX, ELASTIX, PB
• Supports up to 100,000 cards and 300,000 events
• Compatible with Hik-Connect app
• Built-in call button
• Built-in speaker and microphone
• Detection of detachment tampering
• AP mode supported
• Manageable via iVMS-4200, HikConnect, browser
• Support for microSD cards up to 256 GB
• Wall mounting
• Protection degree: IP65, IK09
The Bira EL1-001 electric door strike from EL1 series is used for remote opening of metal, wooden and plastic doors, wickets, or cabinets, through cable connection from access control systems: intercoms, (video) door phones, card readers, etc. The EL1 series has an asymmetrical housing and a reinfor...
The Bira EL1-005 electric door strike from EL1 series is used for remote opening of metal, wooden and plastic doors, wickets, or cabinets, through cable connection from access control systems: intercoms, (video) door phones, card readers, etc. The EL1 series has an asymmetrical housing and a reinfor...
The Bira ES1-001 electric door strike from ES1 series is used for remote opening of metal, wooden and plastic doors, wickets, or cabinets, through cable connection from access control systems: intercoms, (video) door phones, card readers, etc. The ES1 series has a symmetrical housing and a steel kee...
The Bira HARTTE S12U electric door strike from S series is used for remote opening of metal, wooden and plastic doors, wickets, or cabinets, through cable connection from access control systems: intercoms, (video) door phones, card readers, etc. The door strike has a symmetrical housing and a galvan...
The Bira HARTTE S12UP electric self-sustaining door strike from S series is used with access control systems such as intercoms, video intercoms, etc.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3500 N (350 kg)
• Life span: 200,000 cycles
• For left- and right-hand doors
• Steel keeper/latch with 4 mm adjustment range
• Symmetric design
• Self-sustaining
• Energizing voltage range: 10-14 V
• Current consumption AC/DC: 410/570 mA
• NC (normally closed)
• Holding force: 3500 N (350 kg)
• Life span: 200,000 cycles
• For left- and right-hand doors
• Steel keeper/latch with 4 mm adjustment range
• Symmetric design
• Self-sustaining
• Energizing voltage range: 10-14 V
• Current consumption AC/DC: 410/570 mA
The Bira HARTTE S12UW electric door strike from S series is used for remote opening of metal, wooden and plastic doors, wickets, or cabinets, through cable connection from access control systems: intercoms, (video) door phones, card readers, etc. S12UW is equipped with a switch that allows the mecha...
The BIRA HARTTE S12R S-series reversible electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 VDC
• NO (normally open, reversible)
• Continuous power on (100% ED)
• Holding force: 3500 N (350 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 4 mm
• Symmetrical design
• Voltage tolerance: 10-14 V
• DC current drawn: 190 mA
• NO (normally open, reversible)
• Continuous power on (100% ED)
• Holding force: 3500 N (350 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 4 mm
• Symmetrical design
• Voltage tolerance: 10-14 V
• DC current drawn: 190 mA
The BIRA HARTTE XS12U XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12UW XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Switch
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12UP XS-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 V AC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Memory
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Memory
• Voltage tolerance: 10 - 14 V
• AC/DC current drawn: 480/680 mA
The BIRA HARTTE XS12R XS-series reversible electric door strike is used for remote wired opening of metallic, wooden and plastic doors or wickets.
• Energized with 12 VDC
• NO (normally open)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left- and right-hand doors
• Steel strike, adjustable up to 3.5 mm
• Reversible
• Symmetrical design
• Voltage tolerance: 10-14 V
• Current consumption AC/DC: 480/680 mA
• NO (normally open)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left- and right-hand doors
• Steel strike, adjustable up to 3.5 mm
• Reversible
• Symmetrical design
• Voltage tolerance: 10-14 V
• Current consumption AC/DC: 480/680 mA
The HARTTE XS12R-C XS-C series electric door strike is used for remote wired opening of doors.
• Powered by 12 V/DC
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
• NO operating (normally open) mode
• Mechanical strength - pressure 3000 N (300 kg)
• Mechanical strength - 200,000 opening cycles
• For left and right doors
• ZnAl strike with up to 3.5 mm adjustment
• Reversible
• Slip
• Symmetrical design
• Voltage tolerance: 10 - 14 V
• DC current drawn: 200 mA
The BIRA HARTTE XS00U XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UP XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UW XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UPW XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Switch
• Internal memory
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00U-C XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UW-C XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip option
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Slip option
• Switch
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The BIRA HARTTE XS00UM XS00-series electric door strike is used for remote opening of metallic, wooden and plastic doors or wickets.
• Powered with 12-24 VAC/DC
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Monitoring
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
• NC (normally closed)
• Holding force: 3000 N (300 kg)
• Mechanical strength: 200,000 open/close cycles
• For left and right doors
• Steel strike, adjustable up to 3.5 mm
• Symmetrical design
• Continuous operation
• Monitoring
• Voltage tolerance: 11-26 V
• Current drawn: 185-520 mA
The OK-P5 is a long strike plate for use with electric door strikes from the ES1, S, XS, SHD, XSHD Bira series.
• Material: galvanized steel
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
The OK-P2 is a short strike plate for use with electric door strikes from the ES1, S, XS, SHD, XSHD Bira series.
• Material: galvanized steel
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors
• Dimensions: 130 x 25 x 3 mm
• Compatible with electric strikes of the ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors
• Dimensions: 130 x 25 x 3 mm
The OK-P6 is a long strike plate for use with electric door strikes from the EL1, ELP, ES1, S, XS, SHD, XSHD Bira series.
• Material: galvanized steel
• Compatible with electric strikes of the EL1, ELP, ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
• Dimensions: 250 x 25 x 3 mm
• Compatible with electric strikes of the EL1, ELP, ES1, S, XS, SHD, XSHD series
• Dedicated to right and left doors (double-sided)
• Dimensions: 250 x 25 x 3 mm
MG280MR is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Flush-mounted – indoor
• Holding force: 2800 N (280 kg)
• Closure monitoring – reed switch
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12 VDC
• Current drawn: 450 mA
• Dimensions: 250 × 43 × 26.5 mm
• Weight: 2 kg
• Flush-mounted – indoor
• Holding force: 2800 N (280 kg)
• Closure monitoring – reed switch
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12 VDC
• Current drawn: 450 mA
• Dimensions: 250 × 43 × 26.5 mm
• Weight: 2 kg
MG180SR is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 1800 N (180 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 380/190 mA
• Dimensions: 200 × 41.3 × 20.8 mm
• Weight: 1.2 kg
• Surface mounting – indoor
• Holding force: 1800 N (180 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 380/190 mA
• Dimensions: 200 × 41.3 × 20.8 mm
• Weight: 1.2 kg
MG280S is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 2800 N (280 kg)
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 450/240 mA
• Dimensions: 250 × 49 × 25 mm
• Weight: 2.1 kg
• Surface mounting – indoor
• Holding force: 2800 N (280 kg)
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 450/240 mA
• Dimensions: 250 × 49 × 25 mm
• Weight: 2.1 kg
MG280SR is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 2800 N (280 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 450/240 mA
• Dimensions: 250 × 49 × 25 mm
• Weight: 2.1 kg
• Surface mounting – indoor
• Holding force: 2800 N (280 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 450/240 mA
• Dimensions: 250 × 49 × 25 mm
• Weight: 2.1 kg
MG350SR is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 3500 N (350 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 540/270 mA
• Dimensions: 200 × 56.3 × 27 mm
• Weight: 2.35 kg
• Surface mounting – indoor
• Holding force: 3500 N (350 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 540/270 mA
• Dimensions: 200 × 56.3 × 27 mm
• Weight: 2.35 kg
MG350SR is an indoor Hartte Bire series electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 5000 N (500 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 600/300 mA
• Dimensions: 265 × 74.7 × 39 mm
• Weight: 4.6 kg
• Surface mounting – indoor
• Holding force: 5000 N (500 kg)
• Closure monitoring – reed switch
• LED indicator
• No residual magnetism
• No "button" to repel the gate plate from the jumper – no corrosion
• Power supply: 12/24 VDC
• Current drawn: 600/300 mA
• Dimensions: 265 × 74.7 × 39 mm
• Weight: 4.6 kg
ZW300 is an outdoor electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor (IP42)
• Holding force: 1323 N (135 kg)
• Power supply: 12 VDC
• Current drawn: 300 mA
• Dimensions: 170 × 35 × 21 mm
• Weight: 1.05 kg
• Surface mounting – indoor (IP42)
• Holding force: 1323 N (135 kg)
• Power supply: 12 VDC
• Current drawn: 300 mA
• Dimensions: 170 × 35 × 21 mm
• Weight: 1.05 kg
ZW600R is an indoor electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 2646 N (270 kg)
• Closure monitoring – hallotron
• Door status monitoring
• Closure control
• Power supply: 12/24 VDC
• Current drawn: 460/230 mA
• Dimensions: 252 × 48 × 26 mm
• Weight: 1.755 kg
• Surface mounting – indoor
• Holding force: 2646 N (270 kg)
• Closure monitoring – hallotron
• Door status monitoring
• Closure control
• Power supply: 12/24 VDC
• Current drawn: 460/230 mA
• Dimensions: 252 × 48 × 26 mm
• Weight: 1.755 kg
ZW600WPR is an outdoor electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – outdoor (IP65)
• Holding force: 2646 N (270 kg)
• Closure monitoring – hallotron
• Door status monitoring
• Closure control
• Power supply: 12/24 VDC
• Current drawn: 460/230 mA
• Dimensions: 230 × 47.5 × 23 mm
• Weight: 2kg
• Surface mounting – outdoor (IP65)
• Holding force: 2646 N (270 kg)
• Closure monitoring – hallotron
• Door status monitoring
• Closure control
• Power supply: 12/24 VDC
• Current drawn: 460/230 mA
• Dimensions: 230 × 47.5 × 23 mm
• Weight: 2kg
ZW800RV3 is an indoor electro-magnetic lock dedicated to work in access control and time & attendance systems.
• Operating mode: NO (normally open)
• Surface mounting – indoor
• Holding force: 3724 N (380 kg)
• Closure monitoring – hallotron
• Door status monitoring
• Closure control
• Power supply: 12/24 VDC
• Current drawn: 500/250 mA
• Dimensions: 286 × 55 × 28 mm
• Weight: 2.371 kg
• Surface mounting – indoor
• Holding force: 3724 N (380 kg)
• Closure monitoring – hallotron
• Door status monitoring
• Closure control
• Power supply: 12/24 VDC
• Current drawn: 500/250 mA
• Dimensions: 286 × 55 × 28 mm
• Weight: 2.371 kg
MG180L is an L-type mounting hardware dedicated to mounting MG180SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG180SR
• Compatible locks: MG180SR
MG180ZL is a ZL-type mounting hardware dedicated to mounting MG180SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG180SR
• Compatible locks: MG180SR
MG280L is an L-type mounting hardware dedicated to mounting MG280S and MG280SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG280S, MG280SR
• Compatible locks: MG280S, MG280SR
MG280ZL is a ZL-type mounting hardware dedicated to mounting MG280S and MG280SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG280S, MG280SR
• Compatible locks: MG280S, MG280SR
MG180U is a U-type mounting hardware dedicated to mounting MG280S and MG280SR electro-magnetic lock on glass door.
• Mounting bracket for Bira locks
• Compatible locks: MG280S, MG280SR
• Compatible locks: MG280S, MG280SR
MG280I is an I-type mounting hardware dedicated to mounting MG280S and MG280SR electro-magnetic lock on fire door.
• Mounting bracket for Bira locks
• Compatible locks: MG280S, MG280SR
• Compatible locks: MG280S, MG280SR
MG350L is an L-type mounting hardware dedicated to mounting MG350SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG350SR
• Compatible locks: MG350SR
MG350ZL is a ZL-type mounting hardware dedicated to mounting MG350SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG350SR
• Compatible locks: MG350SR
MG500L is an L-type mounting hardware dedicated to mounting MG500SR electro-magnetic locks.
• Mounting bracket for Bira locks
• Compatible locks: MG500SR
• Compatible locks: MG500SR
TL300 is an L-type mounting hardware dedicated to mounting ZW300 electro-magnetic locks.
• L-type mounting bracket for Yotogi locks
• Compatible locks: ZW300
• Compatible locks: ZW300
TZ300 is a Z-type mounting hardware dedicated to mounting ZW300 electro-magnetic locks.
• Z-type mounting bracket for Yotogi locks
• Compatible locks: ZW300
• Compatible locks: ZW300
TU300 is a U-type mounting hardware dedicated to mounting ZW300 electro-magnetic locks.
• U-type mounting bracket for Yotogi locks
• Compatible locks: ZW300
• Compatible locks: ZW300
TL600WP is an L-type mounting hardware dedicated to mounting ZW600WPR electro-magnetic locks.
• L-type mounting bracket for Yotogi locks
• Compatible locks: ZW600WPR
• Compatible locks: ZW600WPR
TZ600WP is a Z-type mounting hardware dedicated to mounting ZW600WPR electro-magnetic locks.
• Z-type mounting bracket for Yotogi locks
• Compatible locks: ZW600WPR
• Compatible locks: ZW600WPR
TU600WP is a U-type mounting hardware dedicated to mounting ZW600WPR electro-magnetic locks.
• U-type mounting bracket for Yotogi locks
• Compatible locks: ZW600WPR
• Compatible locks: ZW600WPR
TP600 is a flat bar dedicated to mounting ZW600 and ZW600R locks on fire doors.
• Mounting bracket for Yotogi locks
• Compatible locks: ZW600, ZW600R
• Compatible locks: ZW600, ZW600R
TL600 is an L-type mounting hardware dedicated to mounting ZW600 and ZW600 electro-magnetic locks.
• L-type mounting bracket for Yotogi locks
• Compatible locks: ZW600, ZW600R
• Compatible locks: ZW600, ZW600R
TZ600 is a Z-type mounting hardware dedicated to mounting ZW600 and ZW600R electro-magnetic locks.
• Z-type mounting bracket for Yotogi locks
• Compatible locks: ZW600, ZW600R
• Compatible locks: ZW600, ZW600R
TU600 is a U-type mounting hardware dedicated to mounting ZW600 and ZW600R electro-magnetic locks.
• U-type mounting bracket for Yotogi locks
• Compatible locks: ZW600, ZW600R
• Compatible locks: ZW600, ZW600R
TL800V3 is an L-type mounting hardware dedicated to mounting ZW800RV3 electro-magnetic locks.
• L-type mounting bracket for Yotogi locks
• Compatible locks: ZW800RV3
• Compatible locks: ZW800RV3
TZ800V3 is a Z-type mounting hardware dedicated to mounting the ZW800RV3 electro-magnetic lock on doors that open inward.
• Z-type mounting bracket for Yotogi locks
• Compatible locks: ZW800RV3
• Compatible locks: ZW800RV3
APWK is an emergency emergency pushbutton used in access control systems.
• Contact type: NO/NC
• Capacity: DC 2 A/30 V
• Material: ABS
• Color: green
• Application: indoor
• Mounting: surface-mounted,
• Reset: dedicated key
• Capacity: DC 2 A/30 V
• Material: ABS
• Color: green
• Application: indoor
• Mounting: surface-mounted,
• Reset: dedicated key
APPK is a fire warning pushbutton used in access control systems
• Contact type: NO/NC
• Capacity: DC 2 A/30 V
• Material: ABS
• Color: red
• Application: indoor
• Mounting: surface-mounted,
• Reset: dedicated key
• Capacity: DC 2 A/30 V
• Material: ABS
• Color: red
• Application: indoor
• Mounting: surface-mounted,
• Reset: dedicated key
YPW3D is an exit pushbutton, used in video intercom and access control systems.
• Material: fire-resistant PCV
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted
YPW1 is an exit pushbutton, used in video intercom and access control systems.
• Materials: zinc alloy (button – steel)
• Pushbutton contacts: NO/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted (slim profiles)
• Pushbutton contacts: NO/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: surface-mounted (slim profiles)
YPW5DP is an exit pushbutton, used in video intercom and access control systems.
• Material: aluminum
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
PW5DK is an exit pushbutton, used in video intercom and access control systems.
• Material: aluminum
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
• Pushbutton contacts: NO/NC/COM
• Tested for more than 500 thousand clicks
• Bell-type pushbutton
• Installation: flush-mounted
