EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
GLISS F slip fluid for blowing and pulling in fibre optic cables and microtubes in a 1 litre bottle. Very efficient.
• Makes blowing and pulling cables in tubes much easier
• Semi-transparent blue or green liquid
• Delicate detergent smell
• Semi-transparent blue or green liquid
• Delicate detergent smell
![Thick-walled smooth-bore microduct with pilot 20/16 [100 m]](https://www.dipol.com.pl/img/thumbnails/e60820+.jpg/90acc5dc6db860e8cabe8192763b15e4.jpg)
FG-P (Fiber Guard) microduct in orange is made of polyethylene (modified HDPE) and is designed for direct burial.
• Microtube outer diameter: 20 mm
• Inner diameter: 16 mm
• Pilot for pulling in cables and wires
• Material: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
• Inner diameter: 16 mm
• Pilot for pulling in cables and wires
• Material: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
A simple through-hole connector designed to connect microtubes with an outer diameter of 20 mm and an inner diameter of 16 mm.
• Straight connector
• Designed for tubes with an inner diameter of 16 mm and outer diameter of 20 mm. 20 mm
• Easy and quick installation
• Watertight
• Gas-tight
• Designed for tubes with an inner diameter of 16 mm and outer diameter of 20 mm. 20 mm
• Easy and quick installation
• Watertight
• Gas-tight
The ZB-1100/50+RAM6 non-invasive ballast mast with adjustable angle of the mast in relation to the ground is designed for the installation of satellite dishes.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1500/38+RAM4 non-invasive ballast mast with adjustable mast angle in relation to the ground is designed for the installation of TV antennas, data transmission and CCTV cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1000/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV/data antennas or CCTV surveillance cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-500/50+RAM2 non-intrusive ballast mast with angle adjustment is suitable for the installation of STARLINK satellite data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
The ZB-500/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV and data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 500x500x200 mm
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
The blanking plug for the 35-gauge tube has the task of sealing and protecting the mast from the inside against external conditions.
• Designed for poles with a diameter of 35 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
