EN
PL
CZ
DE
IE
HU
PT
RO
SK
ES
GLISS F slip fluid for blowing and pulling in fibre optic cables and microtubes in a 1 litre bottle. Very efficient.
• Makes blowing and pulling cables in tubes much easier
• Semi-transparent blue or green liquid
• Delicate detergent smell
• Semi-transparent blue or green liquid
• Delicate detergent smell
![Thick-walled smooth-bore microduct with pilot 20/16 [100 m]](https://www.dipol.com.pl/img/thumbnails/e60820+.jpg/90acc5dc6db860e8cabe8192763b15e4.jpg)
FG-P (Fiber Guard) microduct in orange is made of polyethylene (modified HDPE) and is designed for direct burial.
• Microtube outer diameter: 20 mm
• Inner diameter: 16 mm
• Pilot for pulling in cables and wires
• Material: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
• Inner diameter: 16 mm
• Pilot for pulling in cables and wires
• Material: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
A simple through-hole connector designed to connect microtubes with an outer diameter of 20 mm and an inner diameter of 16 mm.
• Straight connector
• Designed for tubes with an inner diameter of 16 mm and outer diameter of 20 mm. 20 mm
• Easy and quick installation
• Watertight
• Gas-tight
• Designed for tubes with an inner diameter of 16 mm and outer diameter of 20 mm. 20 mm
• Easy and quick installation
• Watertight
• Gas-tight
The ZB-1100/50+RAM6 non-invasive ballast mast with adjustable angle of the mast in relation to the ground is designed for the installation of satellite dishes.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1500/38+RAM4 non-invasive ballast mast with adjustable mast angle in relation to the ground is designed for the installation of TV antennas, data transmission and CCTV cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1000/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV/data antennas or CCTV surveillance cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-500/50+RAM2 non-intrusive ballast mast with angle adjustment is suitable for the installation of STARLINK satellite data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
The ZB-500/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV and data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 500x500x200 mm
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
The blanking plug for the 35-gauge tube has the task of sealing and protecting the mast from the inside against external conditions.
• Designed for poles with a diameter of 35 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
Extraction clamp designed for cable suspension. Body made of robust stainless steel. Suitable for round cables with an external diameter of 3 - 6 mm.
• Handle designed for cable suspension
• Body made of stainless steel with high mechanical resistance
• Designed for round cables with a carrying line of 3 - 6 mm outer diameter
• Minimum breaking load 3 kN
• Body made of stainless steel with high mechanical resistance
• Designed for round cables with a carrying line of 3 - 6 mm outer diameter
• Minimum breaking load 3 kN
The UR-38Z50 zinc-plated masonry bracket is suitable for masts with a diameter of no more than 50 mm. The set includes 2 M8 clips.
• Universal antenna mount
• Mounting to mast/tube or flat surface possible
• 2 M8 clips included
• Distance from wall: 67 cm
• Galvanised
• Mounting to mast/tube or flat surface possible
• 2 M8 clips included
• Distance from wall: 67 cm
• Galvanised
Cable markers make it easier to identify cables. They are particularly useful in installations centred around large cable bundles - e.g. multiswitch, LAN or CCTV installations.
• Clear identification of coaxial and twisted pair cables
• Made of plastic
• Set contains 3 sets of letters with 30 markers each
• Made of plastic
• Set contains 3 sets of letters with 30 markers each
Cable markers make it easier to identify cables. They are particularly useful in installations centred around large cable bundles - such as multiswitch, LAN or CCTV installations.
• Clear identification of coaxial and twisted pair cables
• Made of plastic
• Set contains 10 sets of numbers with 10 markers each
• Made of plastic
• Set contains 10 sets of numbers with 10 markers each
A simple through-hole fitting designed to connect microtubes with an outer diameter of 16 mm and an inner diameter of 12 mm.
• Straight fitting
• Designed for tubes with an ID of 12 mm and OD of 16 mm
• Easy and quick installation
• Watertight
• Gas-tight
• Designed for tubes with an ID of 12 mm and OD of 16 mm
• Easy and quick installation
• Watertight
• Gas-tight
The anchoring clamp allows the suspension of a cable The body is made of UV-protected plastic. The clamp is designed for round cables with a diameter between 3 and 5.5 mm.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 5.5 mm
• Minimum breaking force of 2 kN
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 5.5 mm
• Minimum breaking force of 2 kN
![[INOX] UMX-50 stainless steel masonry antenna mount](https://www.dipol.com.pl/img/thumbnails/e86885+.jpg/e96bd496c3382dfd436df5f22371356c.jpg)
Holder with base made of 2.5 mm thick sheet metal, with a pipe welded to it. The whole is made of stainless steel (INOX).
• Bracket for mounting antenna on a wall
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 460 mm
• Stainless steel
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 460 mm
• Stainless steel
![[INOX] UMX-40 stainless steel masonry antenna mount](https://www.dipol.com.pl/img/thumbnails/e86884+.jpg/577b9dce6e3edf3b9e9b62ca810b91b3.jpg)
Holder with base made of 2.5 mm thick sheet metal, with a pipe welded to it. The whole is made of stainless steel (INOX).
• Bracket for mounting antenna on a wall
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 360 mm
• Stainless steel
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 360 mm
• Stainless steel
The T-SPARE-50 cable reserve cabinet is designed for collecting and organizing a supply of fiber optic cables of various diameters.
• Capacity: 85 m for 10 mm diameter cable
• Mounting: telecommunication poles and manholes
• 5 holes with a diameter of 24 mm
• Casing: 1.5 mm metal sheet
• External dimensions: 505x505x125 mm
• Mounting: telecommunication poles and manholes
• 5 holes with a diameter of 24 mm
• Casing: 1.5 mm metal sheet
• External dimensions: 505x505x125 mm
The UY2 double quick-connector (Scotchlok) allows wires to be connected without stripping the insulation.
Designed for low-voltage copper cables.
Designed for low-voltage copper cables.
• Connection of 2 cable conductors
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
LINEO pul bracket is designed for the implementation of overhead lines based on cables with a diameter of up to 3.5 mm.
• Range of external cable diameters: 2.5 mm-3.5 mm
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design
Insulating gland with 3/4" thread in grey. The gland protects the cable from the sharp edges of the device housing and the device from unwanted external influences.
• Material: ABS
• 3/4" thread
• Colour: grey
• Tightness class: IP68
• 3/4" thread
• Colour: grey
• Tightness class: IP68
![Thick-walled ground optical fibre protection tube 12/8 [200 m]](https://www.dipol.com.pl/img/thumbnails/e60812+.jpg/a889ddb17144ff264aed6c1bc5fe636d.jpg)
The orange-coloured FG-P (Fiber Guard) micro-tube is made of polyethylene (modified HDPE) and is designed for direct underground installation.
• Micro-tube outer diameter: 12 mm
• Inner diameter: 8 mm
• Pilot for pulling cables and wires
• Material of construction: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
• Inner diameter: 8 mm
• Pilot for pulling cables and wires
• Material of construction: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
A simple through-hole fitting designed to connect micro-tubes with an outer diameter of 12 mm and an inner diameter of 8 mm.
• Straight connector
• Suitable for tubes with an ID 8 mm and OD 12 mm
• Easy and quick to assemble
• Watertight
• Gas-tight
• Suitable for tubes with an ID 8 mm and OD 12 mm
• Easy and quick to assemble
• Watertight
• Gas-tight
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
