This category offers, among others, metal accessories for installation of antennas and cabling. Masts designed for installation of TV antennas and telecommunication antennas can be divided into steel masts and aluminum masts. The maximum length of a mast is 3 meters. There is also a range of lattice masts available for taller structures. Mast mounts can be used to install the mast to a wall or chimney. Depending on the version, antenna brackets can be mounted on balustrades or walls.
The range of housings and junction boxes includes, among others: metal, flush-mounted, surface mounted indoor housings designed for the installation of devices and accessories for various types, as well as metal sealed housings with increased tightness class. The range of the is complemented by TV mounts dedicated for mounting TV sets on walls.
The range of housings and junction boxes includes, among others: metal, flush-mounted, surface mounted indoor housings designed for the installation of devices and accessories for various types, as well as metal sealed housings with increased tightness class. The range of the is complemented by TV mounts dedicated for mounting TV sets on walls.
Steel mast 38 mm/1 m galvanized with the possibility of joining /system C/. The galvanizing process ensures durability and resistance to corrosion while maintaining an aesthetic appearance.
• Steel mast
• Length 1 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Interlocking
• Galvanic zinc plating
• Length 1 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Interlocking
• Galvanic zinc plating
Steel mast 38 mm/1.5 m galvanized with the possibility of joining /system C/. The galvanizing process ensures durability and resistance to corrosion while maintaining an aesthetic appearance.
• Steel mast
• Length 1.5 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Interlocking
• Galvanic zinc plating
• Length 1.5 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Interlocking
• Galvanic zinc plating
The stainless steel (INOX) antenna mast with a length of 1.5 metres is made of 38 mm tube with a wall thickness of 1.5 mm.
• Steel mast INOX
• Length 1.5 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Can be combined
• Length 1.5 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Can be combined
Steel mast 38 mm/2 m galvanized with the possibility of joining /system C/. The galvanizing process ensures durability and resistance to corrosion while maintaining an aesthetic appearance.
• Steel mast
• Length 2 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Interlocking
• Galvanic zinc plating
• Length 2 m
• Diameter 38 mm
• Wall thickness 1.5 mm
• Interlocking
• Galvanic zinc plating
Steel mast 50 mm/2.0 m. Galvanized for high durability and corrosion resistance.
• Length 2.0 m
• Galvanized steel
• Diameter 50 mm
• Weight 4.4 kg
• Galvanized steel
• Diameter 50 mm
• Weight 4.4 kg
Steel mast 50 mm/3.0 m. Galvanized for high durability and corrosion resistance.
• Length 3.0 m
• Galvanized steel
• Diameter 50 mm
• Weight 6.7 kg
• Galvanized steel
• Diameter 50 mm
• Weight 6.7 kg
The 250 cm aluminium antenna mast is made of a 40 mm tube with a wall thickness of 2 mm.
• Length: 2.5 m
• Aluminium
• Diameter: 40 mm
• Thickness: 2 mm
• Mass: 1.6 kg
• Aluminium
• Diameter: 40 mm
• Thickness: 2 mm
• Mass: 1.6 kg
The single 1.5 m long MK series lattice tower segment is made of aluminum. The triangular lattice structure is characterized by extremely high strength.
• Tower height: 1.5 m
• Material: Aluminum
• No need for guys up to a height of 6 m
• Wall thickness: 1.5 mm
• Weight: 5.05 kg
• Material: Aluminum
• No need for guys up to a height of 6 m
• Wall thickness: 1.5 mm
• Weight: 5.05 kg
Base for free-standing lattice tower of MK series. The design of the base allows the tower to be tilted horizontally.
• Base for MK series tower base
• Material: galvanized steel, aluminum
• Design allows the tower to tilt to horizontally
• Weight: 3.01 kg
• Material: galvanized steel, aluminum
• Design allows the tower to tilt to horizontally
• Weight: 3.01 kg
Anchor for concrete with a rod diameter of 12 mm for the MK series free-standing lattice mast /set of 3 pcs/.
• Designed for MK series mast base
• Material: galvanised steel, steel
• Bar diameter: 12 mm
• Mass: 1.4 kg
• Material: galvanised steel, steel
• Bar diameter: 12 mm
• Mass: 1.4 kg
The MB-1000 E8740 mast is very convenient for mounting terrestrial TV and communications / Wi-Fi antennas on flat, solid roofs. The installer can use it where there is no possibility of attaching a typical mast to some elements on the roof (there are no suitable chimneys, walls etc.) and the surface...
• Ideal for placing telecommunication and TV antennas on solid flat surfaces
• To be ballasted with 4-8 concrete blocks
• Such concrete blocks (38x24x12 or 38x20x12 or 30x24x12 cm) have to be purchased separately in a local market
• Base frames made of angle sections with 3 mm thickness
• Height: 1 m
• Full size of the base: 58x41 cm
• Plastic cap prevents water from entering the interior of the pipe
• To be ballasted with 4-8 concrete blocks
• Such concrete blocks (38x24x12 or 38x20x12 or 30x24x12 cm) have to be purchased separately in a local market
• Base frames made of angle sections with 3 mm thickness
• Height: 1 m
• Full size of the base: 58x41 cm
• Plastic cap prevents water from entering the interior of the pipe
The MBW-1200 non-invasive ballast mast is suitable for the installation of TV and data antennas.
• The bracket allows mounting to flat, inclined or horizontal surfaces
• Ideally suitable for attaching antennas: WLAN, DVB-T/T2
• Total base dimensions: 580x410 mm
• Mast length: 1,2 m
• Ideally suitable for attaching antennas: WLAN, DVB-T/T2
• Total base dimensions: 580x410 mm
• Mast length: 1,2 m
The MB-3/PLUS E8744 ballast mast base can hold terrestrial TV and communications/Wi-Fi antennas.
• Ideal for attaching antennas: SAT, WLAN, DVB-T/T2
• Hot-dip galvanised throughout.
• External dimensions of the entire base: 2260 x 2260 mm
• Hot-dip galvanised throughout.
• External dimensions of the entire base: 2260 x 2260 mm
The ZB-1500/38+RAM4 non-invasive ballast mast with adjustable mast angle in relation to the ground is designed for the installation of TV antennas, data transmission and CCTV cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1,5 m
• Mast diameter: 38 mm
• Base dimensions: 91,0 x 53,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1000/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV/data antennas or CCTV surveillance cameras.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 1 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-500/38+RAM2 non-invasive ballast mast with angle adjustment is suitable for the installation of TV and data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Mast length: 0.5 m
• Mast diameter: 38 mm
• Base dimensions: 61.0 x 41.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-1100/50+RAM6 non-invasive ballast mast with adjustable angle of the mast in relation to the ground is designed for the installation of satellite dishes.
• Base made of 3 mm thick extrusion-formed steel sheet with welded steel tube
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• Designed for mounting satellite dishes
• Mast length: 1,1 m
• Mast diameter: 50 mm
• Base dimensions: 106,0 x 91,0 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
The ZB-500/50+RAM2 non-intrusive ballast mast with angle adjustment is suitable for the installation of STARLINK satellite data antennas.
• Base made of 3 mm thick extrusion-formed steel sheet, with welded steel tube
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
• Mast length: 0.5 m
• Mast diameter: 50 mm
• Base dimensions: 93.5 x 42.5 cm
• Mast tilt angle adjustment 0...5°
• Surface of elements protected by galvanised coating
• The bracket may be used to mount STARLINK satellite Internet antennas having fi 50 pipe mount
Stainless steel chimney clamp for mounting masts for terrestrial TV, satellite and communication antennas.
• Makes it possible to attach the mast to the chimney
• Material: stainless steel
• Easy installation
• Includes two 5 m long steel bands
• Maximum mast diameter 50 mm
• Weight: 2.75 kg
• Material: stainless steel
• Easy installation
• Includes two 5 m long steel bands
• Maximum mast diameter 50 mm
• Weight: 2.75 kg
A mast bracket for a chimney made from a steel channel. The band is used to band the chimney and install the clamp.
• Allows mast attachment to chimney
• Easy to install
• Comes with two 5m long steel strips
• Possibility to buy a 10 m long strip
• Maximum mast diameter 43 mm
• Weight: 2.75 kg
• Easy to install
• Comes with two 5m long steel strips
• Possibility to buy a 10 m long strip
• Maximum mast diameter 43 mm
• Weight: 2.75 kg
Chimney mast bracket made of square steel profile. The band is used to band the chimney and install the clamp.
• Allows mast attachment to chimney
• Easy to install
• Comes with two 5m long steel strips
• Possibility to buy a 10 m long strip
• Maximum mast diameter 50 mm
• Weight: 3.76 kg
• Easy to install
• Comes with two 5m long steel strips
• Possibility to buy a 10 m long strip
• Maximum mast diameter 50 mm
• Weight: 3.76 kg
The MM-50L6 masonry bracket is used to fix antenna masts to the wall.
• Mast bracket with wall attachment
• Width: 200 mm
• Mounted on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall: 50 mm
• Width: 200 mm
• Mounted on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall: 50 mm
The OMM-50L13 bracket is designed for mounting antenna masts to walls.
• Mast bracket with wall mounting
• Width: 288 mm
• Mounting on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall 130 mm
• Width: 288 mm
• Mounting on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall 130 mm
Clamp OMM-50W6 designed for fixing antenna masts to the wall.
• Mast bracket with wall attachment
• Width: 315 mm
• Mounting on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall 75 mm
• Width: 315 mm
• Mounting on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall 75 mm
OMP-50R45-70 adjustable bracket, designed for fixing antenna masts to the wall, equipped with a support. The set includes two elements.
• Mast bracket with wall attachment
• Adjustable distance from wall: 430 - 700 mm
• Width max. 1010 mm
• For poles with a diameter of 38/50 mm
• Made of galvanised metal
• Fastening on 10 wall plugs
• Adjustable distance from wall: 430 - 700 mm
• Width max. 1010 mm
• For poles with a diameter of 38/50 mm
• Made of galvanised metal
• Fastening on 10 wall plugs
The OMP-50L22 bracket is designed for fixing antenna masts to the wall.
• Mast bracket with wall attachment
• Support for stability
• Width: 360 mm
• For poles with a diameter of 38/50 mm
• Mast distance from wall 210 mm
• Support for stability
• Width: 360 mm
• For poles with a diameter of 38/50 mm
• Mast distance from wall 210 mm
The OMP-50L40 bracket is designed for fixing antenna masts to the wall.
• Wall mast mount
• Support guarantying stability
• Width: 550 mm
• For masts with diameter 38-50 mm
• Distance between mast and wall: ca. 365 mm
• Support guarantying stability
• Width: 550 mm
• For masts with diameter 38-50 mm
• Distance between mast and wall: ca. 365 mm
The OR-30-50R90-150 bracket is used for parallel mounting of pipe masts.
• Allows parallel attachment of masonry masts
• Adjustable mutual distance of masts 300 - 500 mm
• Mast diameters: 50 - 150 mm and 40 - 90 mm
• Adjustable mutual distance of masts 300 - 500 mm
• Mast diameters: 50 - 150 mm and 40 - 90 mm
Clamp OMY-50L19 designed for fixing antenna masts to the wall.
• Mast bracket with wall attachment
• Width: 200 mm
• Mounted on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall 200 mm
• Width: 200 mm
• Mounted on four wall plugs
• For poles with a diameter of 38/50 mm
• Mast distance from wall 200 mm
The OZP-50 bracket allows masts to be attached parallel to each other.
• Material: metal
• Mast diameter: max. 50 mm
• Cybant diameter: 8 mm
• Galvanised
• Mast diameter: max. 50 mm
• Cybant diameter: 8 mm
• Galvanised
The double-mast clamp is used for installing two masts in parallel.
• Material: metal
• Mast diameter: max. 60 mm
• Cybant diameter: 7.2 mm
• Galvanised
• Mast diameter: max. 60 mm
• Cybant diameter: 7.2 mm
• Galvanised
The OZK-50 bracket makes it possible to attach masts at right angles.
• Material: metal
• Mast diameter: max. 50 mm
• Cybant diameter: 8 mm
• Galvanised
• Mast diameter: max. 50 mm
• Cybant diameter: 8 mm
• Galvanised
A solid, compact UR-38L10Y mount made of 4 mm thick structural steel section welded to a pipe, all zinc-coated (galvanized).
• Compact mount for DVB-T and telecommunications antennas
• 4 mm thick structural steel section
• Distance from the wall: 110 mm
• Pipe diameter 38 mm
• Plastic cap
• Galvanized
• 4 mm thick structural steel section
• Distance from the wall: 110 mm
• Pipe diameter 38 mm
• Plastic cap
• Galvanized
The UR-38L10 small wall antenna holder is made of a 4 mm thick steel section with a pipe welded to it, galvanized.
• Small holder for DVB-T and telecommunications antennas
• 4 mm thick steel section
• Distance from wall: 110 mm
• Pipe diameter: 38 mm
• Plastic cap
• Galvanized
• 4 mm thick steel section
• Distance from wall: 110 mm
• Pipe diameter: 38 mm
• Plastic cap
• Galvanized
UR-38L30 wall antenna holder made of 4 mm thick steel flat bar, with a steel pipe welded to it, galvanized.
• Antenna wall mount
• Handle tube diameter: 38 mm
• Height: 300 mm
• Distance from the wall of the mounted antenna: 280 mm
• Electro-galvanized
• Handle tube diameter: 38 mm
• Height: 300 mm
• Distance from the wall of the mounted antenna: 280 mm
• Electro-galvanized
UR-38L30x60 wall antenna holder made of 4 mm thick flat steel bar, with a steel pipe welded to it, galvanized.
• Small holder for DVB-T and telecommunications antennas
• 4 mm thick steel section
• Distance from wall: 340 mm
• Pipe diameter: 38 mm
• Plastic cap
• Galvanized
• 4 mm thick steel section
• Distance from wall: 340 mm
• Pipe diameter: 38 mm
• Plastic cap
• Galvanized
Holder with base made of 2.5 mm thick sheet metal, with a pipe welded to it. The whole is made of stainless steel (INOX).
• Wall mount
• Pipe diameter: 38 mm
• Height: 250 mm
• Distance from wall: 260 mm
• Stainless steel
• Pipe diameter: 38 mm
• Height: 250 mm
• Distance from wall: 260 mm
• Stainless steel
Holder with base made of 2.5 mm thick sheet metal, with a pipe welded to it. The whole is made of stainless steel (INOX).
• Bracket for mounting antenna on a wall
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 360 mm
• Stainless steel
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 360 mm
• Stainless steel
Holder with base made of 2.5 mm thick sheet metal, with a pipe welded to it. The whole is made of stainless steel (INOX).
• Bracket for mounting antenna on a wall
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 460 mm
• Stainless steel
• Tube diameter of 38 mm
• Height 250 mm
• Distance of mounted antenna from wall 460 mm
• Stainless steel
AMSTRAD UMA50U50 mount designed for wall mounting of satellite dishes.
• Bracket designed for satellite dishes up to 150 cm
• Bracket tube diameter: 50 mm
• Mounting: 4 x expansion bolts Ø 10 mm
• Joints enabling mounting to a wall or flat roof
• All electro-galvanized
• Bracket tube diameter: 50 mm
• Mounting: 4 x expansion bolts Ø 10 mm
• Joints enabling mounting to a wall or flat roof
• All electro-galvanized
Straight TV-SAT antenna holder WR-5/75cm made of twisted 3 mm steel sheet, with a steel pipe welded to it, galvanized.
• Simple mount for wall-mounted antennas
• Lenght: 75 cm
• Base made of structural steel (3 mm)
• Galvanized
• Lenght: 75 cm
• Base made of structural steel (3 mm)
• Galvanized
The WR-5 30 cm TV-SAT antenna bracket is made of hot-dip galvanised steel. The zinc coating has anticorrosive properties.
• Mounting bracket for TV, SAT and communication antennas
• Wall-mounting
• Increased corrosion resistance
• Hot-dip galvanised
• Wall-mounting
• Increased corrosion resistance
• Hot-dip galvanised
TV-SAT antenna holder USC-32/200-J, bent, designed for mounting antennas, painted with light-colored polyester powder paint.
• DVB-T/SAT/WLAN/GSM antenna mount
• Tube diameter: 32 mm
• Colour: white
• Wall mount
• Powder coated
• Tube diameter: 32 mm
• Colour: white
• Wall mount
• Powder coated
TV-Sat antenna bracket 30 cm bent for antenna mounting, galvanised.
• Small bracket for DVB-T, SAT and telecom antennas
• 4 mm thick steel section
• Distance from wall: 300 mm
• Tubing diameter: 38 mm
• Plastic cap
• Galvanised
• 4 mm thick steel section
• Distance from wall: 300 mm
• Tubing diameter: 38 mm
• Plastic cap
• Galvanised
Angular wall antenna mount USL-38/300-Z, easy to install, made of hot-dip galvanized steel.
• High quality and attractive design
• Made of hot-dip galvanized steel
• Distance from wall: 28 cm
• Recommended for mounting satellite dishes and terrestrial TV antennas
• Made of hot-dip galvanized steel
• Distance from wall: 28 cm
• Recommended for mounting satellite dishes and terrestrial TV antennas
USL-38/400-Z angled wall bracket, easy to install, made of hot-dip galvanized steel.
• Mounting bracket for TV, SAT and communication antennas
• Wall mounting
• High aesthetics
• Made of hot-dip galvanized steel
• Wall mounting
• High aesthetics
• Made of hot-dip galvanized steel
Galvanized antenna support designed for mounting antennas/dishes on vertical flat surfaces.
• Popular mount for TV, WiFi, LTE antennas
• For vertical flat surfaces
• Galvanized
• For vertical flat surfaces
• Galvanized
The WR-30/110 galvanised antenna holder for TV-SAT is intended for mounting antennas. The bracket has to be fixed to flat surfaces.
• SAT/TV and communication antenna mount
• Wall-mounted
• Made of galvanized steel
• Basic resistance to corrosion
• Wall-mounted
• Made of galvanized steel
• Basic resistance to corrosion
The WR-5 29 cm x110 cm SAT/TV antenna mount is made of hot-dip galvanized steel.
• Universal holder for satellite TV antennas
• Resistant to corrosion
• Thickness of steel: 1.5 mm
• Hot-dip galvanised
• Resistant to corrosion
• Thickness of steel: 1.5 mm
• Hot-dip galvanised
The WR-50/110 mount is made of hot-dip galvanized steel. The zinc coating has strong anti-corrosion properties.
• Bracket for DVB-T and SAT antennas
• Mounting to flat surfaces
• Distance from wall: 50 cm
• Hot dip galvanised
• Mounting to flat surfaces
• Distance from wall: 50 cm
• Hot dip galvanised
The WR-5/50 50 cm galvanised antenna mount is intended for mounting antennas. The bracket is screwed to flat surfaces.
• Support for DVB-T antennas and SAT dishes
• Vertical flat surface mount
• Distance from wall: 44 cm
• Galvanized
• Vertical flat surface mount
• Distance from wall: 44 cm
• Galvanized
The UMA-50R100 103 cm adjustable bracket is designed for mounting television antennas and data transmission antennas.
• The bracket allows mounting to flat, sloping or horizontal surfaces
• Easy and universal mounting system
• Ideal for WLAN, DVB-T/T2 antennas
• Galvanic zinc plating
• Easy and universal mounting system
• Ideal for WLAN, DVB-T/T2 antennas
• Galvanic zinc plating
The TV-SAT antenna holder UR-38Z120 (left) is designed for mounting antennas. The zinc coating has anti-corrosion properties.
• Mounting bracket for TV, SAT and communication antennas
• Wall-mounting
• Length: 117 cm
• Galvanised
• Wall-mounting
• Length: 117 cm
• Galvanised
The TV-SAT antenna holder UR-38Z120 (right) is designed for mounting antennas. The zinc coating has anti-corrosion properties.
• Mounting bracket for TV, SAT and communication antennas
• Wall mounting
• Length: 117 cm
• Galvanized
• Wall mounting
• Length: 117 cm
• Galvanized
The TV-SAT UR-38Z75 antenna holder (left) is designed for mounting antennas. The zinc coating has anti-corrosion properties.
• Bracket for DVB-T/T2 and SAT antennas
• Mounting to flat surfaces
• Bracket length: 675 mm
• Electro-galvanized
• Mounting to flat surfaces
• Bracket length: 675 mm
• Electro-galvanized
The TV-SAT antenna holder UR-38Z75 (right) is designed for mounting antennas. The zinc coating has anti-corrosion properties.
• Bracket for DVB-T/T2 and SAT antennas
• Mounting to flat surfaces
• Bracket length: 675 mm
• Electro-galvanized
• Mounting to flat surfaces
• Bracket length: 675 mm
• Electro-galvanized
Antenna holder [TYPE U] TV-SAT UMU-40U32 designed for mounting TV, telecommunications and SAT antennas. The zinc coating has anti-corrosion properties.
• Medium-sized holder for TV, telecommunications and SAT antennas
• Mounting to a wall or chimney
• Simple yet durable construction
• Galvanized
• Mounting to a wall or chimney
• Simple yet durable construction
• Galvanized
The URI-38Z30 galvanised mast (pipe) mount is designed for mounting antennas. The bracket is mounted to a mast (mast crossing) or balustrade.
• Handle designed for mast or tube mounting
• Useful length: 30 cm
• Vertical installation possible
• 2 M8 clips with sheet metal included
• Galvanised
• Useful length: 30 cm
• Vertical installation possible
• 2 M8 clips with sheet metal included
• Galvanised
The URI-38Z100 galvanised mast (pipe) mount is designed for mounting antennas. The bracket is mounted to a mast (mast crossing) or balustrade.
• Antenna support mounted to a mast, balustrade etc.
• Length ca. 100 cm
• For horizontal or vertical installation
• 2x M8 U-bolts with accessories included
• All components galvanized - resistant to corrosion
• Length ca. 100 cm
• For horizontal or vertical installation
• 2x M8 U-bolts with accessories included
• All components galvanized - resistant to corrosion
Mast (masonry) bracket UR-38Z3060 galvanised, intended for mounting antennas. The bracket is mounted to a mast or balustrade.
• Mounting of antenna to balustrade, mast
• Including 2 M8 clips
• Galvanised
• Including 2 M8 clips
• Galvanised
The support allows for mounting an antenna/dish to a mast, balustrade, as well as to a wall.
• The most popular version of the universal bracket.
• Mounting to mast, railing
• Mounting to wall, chimney
• Comes with 2 M8 clips
• Galvanised
• Mounting to mast, railing
• Mounting to wall, chimney
• Comes with 2 M8 clips
• Galvanised
The UBC-38/300-H balcony mount can be fixed to pipes up to 50 mm in diameter, either horizontally or vertically.
• Mounting on pipe up to 50 mm in diameter
• Hot dip galvanized steel
• 2 M8 clamps included
• Weight: 1.21 kg
• Hot dip galvanized steel
• 2 M8 clamps included
• Weight: 1.21 kg
UR-38Z50 galvanized wall bracket adapted to a mast with a diameter of no more than 50 mm. The set includes 2 M8 clamps.
• Universal antenna mount
• Possibility of mounting to a mast/pipe or flat surface
• 2 M8 clamps included
• Distance from the wall: 47 cm
• Electro-galvanized
• Possibility of mounting to a mast/pipe or flat surface
• 2 M8 clamps included
• Distance from the wall: 47 cm
• Electro-galvanized
The UR-38Z50 zinc-plated masonry bracket is suitable for masts with a diameter of no more than 50 mm. The set includes 2 M8 clips.
• Universal antenna mount
• Mounting to mast/tube or flat surface possible
• 2 M8 clips included
• Distance from wall: 67 cm
• Galvanised
• Mounting to mast/tube or flat surface possible
• 2 M8 clips included
• Distance from wall: 67 cm
• Galvanised
Balcony mount UBU 38/450 easy to install. Certified by TUV Rheinland Poland. Distinct for high quality, durability and reliability.
• Universal RTV/SAT antenna mount
• Can be mounted on a tube or a flat surface
• 2 M8 clips included
• Arm length: 450 mm
• Galvanised
• Can be mounted on a tube or a flat surface
• 2 M8 clips included
• Arm length: 450 mm
• Galvanised
The UBC-38/400-H faceplate balcony bracket can be mounted on a pipe with a diameter of up to 50 mm, both horizontally and vertically.
• Mounts on pipe up to 50 mm in diameter
• Hot-dip galvanized steel
• Includes 2 M8 clips
• Hot-dip galvanized steel
• Includes 2 M8 clips
The USBC-38/300-Z curved wall-balcony mount is made of steel, designed for satellite and terrestrial antennas mounted on walls and balustrades.
• Universal RTV/SAT mount
• Made of steel, easy to install
• Mounted on walls and balustrades
• Distance from the wall: 300 mm
• Mounting: clamps, screws
• Hot-dip galvanized
• Made of steel, easy to install
• Mounted on walls and balustrades
• Distance from the wall: 300 mm
• Mounting: clamps, screws
• Hot-dip galvanized
The USBC-38/400-Z curved wall-balcony mount is made of steel, designed for satellite and terrestrial antennas mounted on walls and balustrades.
• Universal RTV/SAT mount
• Made of steel, easy to install
• Mounted on walls and balustrades
• Distance from the wall: 400 mm
• Mounting: clamps, screws
• Hot-dip galvanized
• Made of steel, easy to install
• Mounted on walls and balustrades
• Distance from the wall: 400 mm
• Mounting: clamps, screws
• Hot-dip galvanized
WG-25/800 TV holder, galvanized, elongated. It is made of a 4 mm flat bar and a 25 mm diameter steel pipe.
• Small holder for DVB-T and telecommunications antennas
• 4 mm thick steel section
• Distance from wall: 280 mm
• Pipe diameter: 25 mm
• Plastic cap
• Hot-dip galvanized
• 4 mm thick steel section
• Distance from wall: 280 mm
• Pipe diameter: 25 mm
• Plastic cap
• Hot-dip galvanized
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire, through version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 2-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 3-wire version
• Installation of wires from 0.2 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
WAGO connectors for quick connection of electrical wiring.
• Easy to use: lift the lever, insert the wire, lower the lever
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
• 5-wire version
• Installation of wires from 0.14 to 4 mm²
• Installation of single- and multi-stranded conductors and wires
• Time-saving design for installers and equipment manufacturers
• Fast connection of high-power devices
The UY2 double quick-connector (Scotchlok) allows wires to be connected without stripping the insulation.
Designed for low-voltage copper cables.
Designed for low-voltage copper cables.
• Connection of 2 cable conductors
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
• Core diameter from 0.4 to 0.9 mm
• Core diameter with insulation from 0.8 to 2.8 mm
• Filling with anti-corrosion gel
• Resistant to moisture
• Operating temperature: -40°C to 60°C
The tape is used when fixing the OK-43 or OK-50 chimney clamp.
• Width: 26 mm
• Thickness: 0.5 mm
• Length: 10 m
• Galvanised
• Designed for OK43 and OK50 holders
• Thickness: 0.5 mm
• Length: 10 m
• Galvanised
• Designed for OK43 and OK50 holders
The I-T1500.ES-AL pole bracket is made of aluminum alloys and can be fastened with two 20 mm steel straps or one screw.
• Made of aluminum alloys
• Durable and corrosion resistant
• Can be fastened with 20 mm steel strips or screws
• Durable and corrosion resistant
• Can be fastened with 20 mm steel strips or screws
The I-T1500.PS-AL pole bracket is made of aluminum alloy. It can be mounted to a pole with two steel 20-millimeter wide tape or with one screw.
• Made of aluminium alloys
• Durable and corrosion resistant
• Can be mounted with 20 mm steel strips or bolts
• Durable and corrosion resistant
• Can be mounted with 20 mm steel strips or bolts
Telcom's SS BELG via bracket finds its use in the construction of fibre-optic overhead networks.
• Universal clamp for overhead lines
• Carabiner clip hook
• Carabiner clip hook
Extraction clamp I-ODWAT-22 for flat cables up to 10 mm wide and 4 mm high. Made of stainless steel.
• Dedicated for flat cables
• Maximum cable width: 10 mm
• Made of stainless steel
• Easy to mount
• Maximum cable width: 10 mm
• Made of stainless steel
• Easy to mount
The DROP extraction mount allows the suspension of fibre optic cable with a diameter of 3 - 6 mm and the winding of a short supply.
• For suspending cables with diameter 3-6 mm
• UV-protected plastic
• Place for a short cable reserve
• UV-protected plastic
• Place for a short cable reserve
LINEO pul bracket is designed for the implementation of overhead lines based on cables with a diameter of up to 3.5 mm.
• Range of external cable diameters: 2.5 mm-3.5 mm
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design
The anchoring clamp allows the suspension of a cable The body is made of UV-protected plastic. The clamp is designed for round cables with a diameter between 3 and 7 mm.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 7 mm
• Minimum breaking force of 3.6 kN
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 7 mm
• Minimum breaking force of 3.6 kN
Lashing clamp designed for cable suspension. Body made of UV-resistant plastic.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 6 and 9 mm
• Minimum breaking force of 3.6 kN
• Body made of UV-protected plastic
• For cables with a diameter between 6 and 9 mm
• Minimum breaking force of 3.6 kN
I-T1000.PA extraction clamp for cable suspension. Body made of aluminium alloy, wedges made of UV-resistant plastic.
• Lashing bracket for cable suspension
• Designed for cables with a diameter of 8 - 12 mm
• Robust construction - aluminium body, wedges made of UV resistant plastic
• Minimum breaking force: 10 kN
• Designed for cables with a diameter of 8 - 12 mm
• Robust construction - aluminium body, wedges made of UV resistant plastic
• Minimum breaking force: 10 kN
The TELENCO DROP extraction mount allows the suspension of fibre optic cable up to 4 mm in diameter and the winding of a short supply.
• Designed for cables with outer dimension up to 4 mm
• Body made of UV resistant plastic
• Possibility to suspend flat cables
• Body made of UV resistant plastic
• Possibility to suspend flat cables
Extraction clamp designed for cable suspension. Body made of robust stainless steel. Suitable for round cables with an external diameter of 3 - 6 mm.
• Handle designed for cable suspension
• Body made of stainless steel with high mechanical resistance
• Designed for round cables with a carrying line of 3 - 6 mm outer diameter
• Minimum breaking load 3 kN
• Body made of stainless steel with high mechanical resistance
• Designed for round cables with a carrying line of 3 - 6 mm outer diameter
• Minimum breaking load 3 kN
The reinforced steel banding tool is designed for tensioning and cutting the steel banding.
• Reinforced
• Suitable for 10-20 mm wide steel bands
• Suitable for 10-20 mm wide steel bands
The OZ-50 M8 clamp is used to mount antennas to a mast.
• Material: metal
• Cybant diameter: 8 mm
• Sheet thickness: 2.5 mm
• Galvanised
• Cybant diameter: 8 mm
• Sheet thickness: 2.5 mm
• Galvanised
The OZ-60 M8 clamp is used to fix antennas to a mast.
• Material: Metal
• Mast diameter: 60 mm
• U-bolt diameter: 7.2 mm
• Galvanised
• Mast diameter: 60 mm
• U-bolt diameter: 7.2 mm
• Galvanised
A Y-type clip for 10-millimeter wide steel bands.
• Pin type: Y
• Suitable for 10 mm wide strips
• Pack of 100 pcs
• Suitable for 10 mm wide strips
• Pack of 100 pcs
A Y-type clip for 20-millimeter wide steel bands.
• Type: Y
• For 20-milimmeter wide bands
• Packaging: 100 pieces
• For 20-milimmeter wide bands
• Packaging: 100 pieces
An L-type clip for 10-millimeter wide steel bands.
• Type: L
• For 10-millimeter wide bands
• Packaging: 100 pieces
• For 10-millimeter wide bands
• Packaging: 100 pieces
An L-type clip for 20-millimeter wide steel bands.
• Type: L
• For 20-milimmeter wide bands
• Packaging:100 pieces
• For 20-milimmeter wide bands
• Packaging:100 pieces
The steel band is placed in a handy plastic dispenser that serves as its packaging.
• Length: 50 m
• Width: 19 mm
• Thickness: 0.4 mm
• Material: stainless steel AISI 304
• Width: 19 mm
• Thickness: 0.4 mm
• Material: stainless steel AISI 304
The band is used, among others, to install slings, to make straps for fastening brackets and frames on poles.
• Length: 30 m
• Width: 9.5 mm
• Thickness: 0.6 mm
• Material: AISI 430 stainless steel
• Width: 9.5 mm
• Thickness: 0.6 mm
• Material: AISI 430 stainless steel
The band is used, among others, to install slings, to make straps for fastening brackets and frames on poles.
• Length: 50 m
• Width: 10 mm
• Sheet gauge: 0.4 mm
• Material: AISI 304 stainless steel
• Width: 10 mm
• Sheet gauge: 0.4 mm
• Material: AISI 304 stainless steel
The band is used, among others, to install slings, to make straps for fastening brackets and frames on poles.
• Length: 50 m
• Width: 19 mm
• Sheet gauge: 0.7 mm
• Material: AISI 430 stainless steel
• Width: 19 mm
• Sheet gauge: 0.7 mm
• Material: AISI 430 stainless steel
The 38 mm mast cap is designed to seal and protect the mast from the inside against external conditions.
• Designed for poles with a diameter of 38 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
The blanking plug for the 35-gauge tube has the task of sealing and protecting the mast from the inside against external conditions.
• Designed for poles with a diameter of 35 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
The blanking plug for the fi 40 pipe has the task of sealing and protecting the mast from the inside against external conditions.
• Designed for poles with a diameter of 40 mm
• Protects the centre pole from rain, snow
• Protects the centre pole from rain, snow
The JK-50 E9163 zinc-plated clamp is used for mounting lightning rods to antenna masts/towers.
• Material: metal
• Fully galvanized
• Mast diameter max. 50 mm
• Weight: 0.24 kg
• Fully galvanized
• Mast diameter max. 50 mm
• Weight: 0.24 kg
Mini M5 antenna mount used to attach the antenna to the mast pipe.
• Maximum mast diameter 40 mm
• Wire diameter 5 mm
• Galvanized
• Wire diameter 5 mm
• Galvanized
Small clamp M6 for mounting an antenna to a mast.
• Maximum mast diameter 40 mm
• Wire diameter 6 mm
• Galvanized
• Wire diameter 6 mm
• Galvanized
Large M6 antenna mount used to attach the antenna to the mast pipe.
• Maximum mast diameter 40 mm
• Wire diameter 6 mm
• Galvanized
• Wire diameter 6 mm
• Galvanized
Clips for mounting the USBC-38/300 bracket to a mast or balcony railing.
• Maximum mast diameter 50 mm
• Wire diameter 8 mm
• Galvanized
• Wire diameter 8 mm
• Galvanized
The package contains 100 anchors as seen in the picture above. Hole diameter - 12 mm. Intended for 8 mm screws. The length of screw - 80 mm, size of the head - 13 mm.
• Hole diameter: 12 mm
• Screw diameter: 8 mm
• Screw length: 80 mm
• Head/wrench size: 13 mm
• Screw diameter: 8 mm
• Screw length: 80 mm
• Head/wrench size: 13 mm
The installation box 150x110x700 mm is made of plastic. It is used to protect electronic devices.
• The box is designed for protecting electronic devices and cable connections in installations
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
The M5734 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Designed for protection of electronic devices and cable connectors
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
The M5736 installation box (240x190x90 mm) is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• The box is designed for protecting electronic devices and cable connections in installations
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
The installation box 240x190x125 mm is made of plastic.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
The Alubox 140x115x60 mm M5742 box is an electrical installation box made of aluminium. It owes its high IP66 protection class to the gasket.
• Hermetic box made of aluminium
• IP66 protection class
• EPDM rubber seal
• Dimensions: 140x115x60 mm
• Possibility to purchase dedicated accessories
• IP66 protection class
• EPDM rubber seal
• Dimensions: 140x115x60 mm
• Possibility to purchase dedicated accessories
The 240x190 mm mounting plate is made of galvanised steel. It is used to mount devices in installation boxes.
• For mounting devices in installation boxes
• Includes 4 screws to attach the board to the enclosure
• Includes 4 screws to attach the board to the enclosure
The mounting plate for the Alubox 140x115x60 mm box is made of galvanised steel. It is used to mount devices in installation boxes.
• For mounting devices in installation boxes
• Includes 4 screws to attach the board to the enclosure
• Made of galvanised steel
• Includes 4 screws to attach the board to the enclosure
• Made of galvanised steel
The DIN rail is used for the installation of devices intended for installation on a DIN rail in an Alubox 140x115x60 mm installation box.
• For DIN rail installation
The ML146 cable glands are designed for inserting cable into an enclosure. In addition, they protect the cable from being cut by the sharp edges of the hole.
• Material: ABS
• Colour: grey
• Tightness class: IP68
• Colour: grey
• Tightness class: IP68
The ML147 cable glands are designed for inserting cable into an enclosure. In addition, they protect the cable from being cut by the sharp edges of the hole.
• Material: ABS
• Colour: grey
• Tightness class: IP68
• Colour: grey
• Tightness class: IP68
The ML145 cable glands are designed for inserting cable into an enclosure. In addition, they protect the cable from being cut by the sharp edges of the hole.
• Material: ABS
• Colour: grey
• Tightness class: IP68
• Colour: grey
• Tightness class: IP68
Insulating gland with 3/4" thread in grey. The gland protects the cable from the sharp edges of the device housing and the device from unwanted external influences.
• Material: ABS
• 3/4" thread
• Colour: grey
• Tightness class: IP68
• 3/4" thread
• Colour: grey
• Tightness class: IP68
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 500x700x200 mm
• Material: 0.8 - 1.2 mm galvanized steel sheet
• Front: door locked with a cylinder lock with 2 keys included
• Back: 6 mm thick plywood wall
• 35 mm diameter holes for cable glands in the top and bottom panels
• Weight 7.7 kg
• Material: 0.8 - 1.2 mm galvanized steel sheet
• Front: door locked with a cylinder lock with 2 keys included
• Back: 6 mm thick plywood wall
• 35 mm diameter holes for cable glands in the top and bottom panels
• Weight 7.7 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 400x400x140 mm
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 3.40 kg
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 3.40 kg
The casing is used in surface-mounted installations in telecommunications installations to protect various devices installed in this type of installations.
• Dimensions: 520x400x140 mm
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 4.20 kg
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 4.20 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Width x height x depth: 300x300x100 mm
• Weight: 1.75 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.75 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
The housing is used for surface mounting for telecommunication systems in order to protect various devices installed.
• Dimensions: 240x150x100 mm
• Material: 0.8-1.2 mm thick galvanized steel sheet
• Front: door closed with a cylinder lock with 2 keys in set
• Back: 6-mm thick wall made of plywood
• Weight: 0.90 kg
• Material: 0.8-1.2 mm thick galvanized steel sheet
• Front: door closed with a cylinder lock with 2 keys in set
• Back: 6-mm thick wall made of plywood
• Weight: 0.90 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Box for housing splitters, taps etc. in buildings
• Width x height x depth: 240x150x50 mm
• Weight: 0.70 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Width x height x depth: 240x150x50 mm
• Weight: 0.70 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 200x300x120 mm
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.6 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.6 kg
Metal housing, used as connection / distribution box, 2 keys included. Size: 540x420x180 mm.
• Dimensions: 540x400x180 mm
• Material: galvanized steel sheet 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 5.60 kg
• Material: galvanized steel sheet 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 5.60 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 500x500x200 mm
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 6.10 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 6.10 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 450x350x120 mm
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.70 kg
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.70 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 650x350x120 mm
• Material: galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.50 kg
• Material: galvanised steel sheet 0.8 - 1.2 mm thick
• Front: door locked by cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 3.50 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 600x400x200 mm
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: doors with cylinder lock and two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 6.50 kg
• Material: Galvanised steel sheet 0.8 - 1.2 mm thick
• Front: doors with cylinder lock and two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 6.50 kg
The enclosure is used for surface mounting in telecom systems to protect various devices installed in such systems.
• Dimensions: 1000x550x150 mm
• Front: double door, one leaf secured with two bolts, and the other lockable with a cylinder lock with 2 keys included
• Back: wall made of plywood with a thickness of 6 mm
• Weight 14 kg
• Front: double door, one leaf secured with two bolts, and the other lockable with a cylinder lock with 2 keys included
• Back: wall made of plywood with a thickness of 6 mm
• Weight 14 kg
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 300x300x120 mm
• Mass: 3.1 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 3.1 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
Hermetic cabinet designed for pole or wall mounting. Designed for CCTV installations. Inside the cabinet there is a mounting plate and two DIN rails.
• Designed for CCTV systems
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• The box can be mounted on a pole or wall
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mountable on a wall or pole
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
The mount has been designed for placing Signal waterproof installation boxes on poles with diameters from 40 to 60 mm.
• For placing waterproof installation boxes on poles with diameters from 40 to 60 mm
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
Mast bracket for airtight enclosures, enabling installation on masts with a diameter of 40 to 60 mm.
• Mounting to mast 40...60 mm
Mast bracket for airtight enclosures, enabling installation on masts with a diameter of 40 to 60 mm.
• Mounting to mast 40...60 mm
Pole mounting bracket for airtight enclosures.
• Pole mounting of waterproof boxes
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
Pole mount for waterproof boxes SH-750 for pole mounting.
• Pole mounting of waterproof boxes
• Fixing a box with M5 bolts
• 3 brackets included
• Made of aluminum – resistant to corrosion
• Fixing a box with M5 bolts
• 3 brackets included
• Made of aluminum – resistant to corrosion
Mast mount for sealed boxes 210/230/145 for pole mounting.
• Mounting of sealed boxes to a pole
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant
The cabinet is made of corrosion-resistant aluminum and designed both for indoor and outdoor use.
• Mounting on mast or wall
• Dimensions: 426/567/369 mm
• RACK brackets
• Doors protected by a seal
• Doors with key lock
• IP55 protection class
• Dimensions: 426/567/369 mm
• RACK brackets
• Doors protected by a seal
• Doors with key lock
• IP55 protection class
Waterproof cabinet designed for a mast or wall mounting, with a mounting plate inside.
• Made of aluminum, corrosion resistant
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
Sealed cabinet designed for mounting to the ground. Ideal as a housing for telecommunications connections.
• Made of aluminum, corrosion resistant
• Dimensions: 1355x295x208 mm
• Weight 5.3 kg
• Dimensions: 1355x295x208 mm
• Weight 5.3 kg
The R90632 hermetic enclosure bracket allows it to be mounted on masts from 40-60 mm in diameter.
• Mounting to mast 40...60 mm
Surface-mounted box, designed for installation in any flat of a multi-family building whose design complies with current regulations.
• Dimensions: 300x350x100 mm
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 3.5 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 3.5 kg
A flush-mounted box, designed for installation in any flat of a multi-family building whose design complies with current regulations.
• External dimensions (W x H x D): 300 x 350 x 90 mm
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 2.9 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 2.9 kg
A flush-mounted box, designed for installation in any flat of a multi-family building whose design complies with current regulations.
• External dimensions: 355 x 405 x 90 mm
• Weight: 4.9 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 4.9 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
Surface mounted junction box, for installation in any apartment in a multi-family building, compliant with applicable regulations.
• Dimensions: 350x400x100 mm
• Material: steel sheet, galvanised, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Mounting panel
• Cable openings
• Mass: 4 kg
• Material: steel sheet, galvanised, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Mounting panel
• Cable openings
• Mass: 4 kg
The GT-WB1 LNB is dedicated for applications in multiswitch systems using Wide Band technology. It is based on a single local oscillator operating at 10.41 GHz.
• LNB type: Wide band for multiswitch systems
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
• Half of the cables (2 instead of 4)
• Two outputs: V polarization, H polarization
• Gain: 50-60 dB
• Neck diameter: 40 mm
The stand with a fixing tube diameter of 35 mm is used to unwind rolled coaxial cable from a reel with a maximum width of 340 mm and a reel diameter of 390 mm.
• Provides convenient cable unwinding during installation
• Fastening tube diameter 35 mm
• Max. width / diameter of reel: 340 mm / 390 mm
• Suitable for Triset-113, RG-6 Dipolnet and Tri-Lan 240 cables
• Fastening tube diameter 35 mm
• Max. width / diameter of reel: 340 mm / 390 mm
• Suitable for Triset-113, RG-6 Dipolnet and Tri-Lan 240 cables
The clip is designed for 12/8 connectors and protects the connector from accidental opening.
• Protects the connector for 12/8 microtubes
The orange-coloured FG-P (Fiber Guard) micro-tube is made of polyethylene (modified HDPE) and is designed for direct underground installation.
• Micro-tube outer diameter: 12 mm
• Inner diameter: 8 mm
• Pilot for pulling cables and wires
• Material of construction: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
• Inner diameter: 8 mm
• Pilot for pulling cables and wires
• Material of construction: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
A simple through-hole fitting designed to connect micro-tubes with an outer diameter of 12 mm and an inner diameter of 8 mm.
• Straight connector
• Suitable for tubes with an ID 8 mm and OD 12 mm
• Easy and quick to assemble
• Watertight
• Gas-tight
• Suitable for tubes with an ID 8 mm and OD 12 mm
• Easy and quick to assemble
• Watertight
• Gas-tight
A simple through-hole fitting designed to connect microtubes with an outer diameter of 16 mm and an inner diameter of 12 mm.
• Straight fitting
• Designed for tubes with an ID of 12 mm and OD of 16 mm
• Easy and quick installation
• Watertight
• Gas-tight
• Designed for tubes with an ID of 12 mm and OD of 16 mm
• Easy and quick installation
• Watertight
• Gas-tight
FG-P (Fiber Guard) microduct in orange is made of polyethylene (modified HDPE) and is designed for direct burial.
• Microtube outer diameter: 20 mm
• Inner diameter: 16 mm
• Pilot for pulling in cables and wires
• Material: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
• Inner diameter: 16 mm
• Pilot for pulling in cables and wires
• Material: polyethylene
• Pressure resistance: 15 bar
• Thick wall allows safe burial in the ground
A simple through-hole connector designed to connect microtubes with an outer diameter of 20 mm and an inner diameter of 16 mm.
• Straight connector
• Designed for tubes with an inner diameter of 16 mm and outer diameter of 20 mm. 20 mm
• Easy and quick installation
• Watertight
• Gas-tight
• Designed for tubes with an inner diameter of 16 mm and outer diameter of 20 mm. 20 mm
• Easy and quick installation
• Watertight
• Gas-tight
GLISS F slip fluid for blowing and pulling in fibre optic cables and microtubes in a 1 litre bottle. Very efficient.
• Makes blowing and pulling cables in tubes much easier
• Semi-transparent blue or green liquid
• Delicate detergent smell
• Semi-transparent blue or green liquid
• Delicate detergent smell
The cable stock rack allows the safe storage of line and client cable stocks (approximately 80 - 100 m) while maintaining a suitable bending radius.
• Material: aluminum
• Cable diameter 2 - 12 mm
• Reserve length ca. 80 – 100 m
• Reserve reel diameter: 550 mm
• Space for a joint box
• Cable diameter 2 - 12 mm
• Reserve length ca. 80 – 100 m
• Reserve reel diameter: 550 mm
• Space for a joint box
Four-spoke ALU 500 rack for the storage of fiber optic cable in telecommunications manholes, on walls and poles.
• Reserve reel diameter: 500 mm
• Material: aluminum
• Spoke width 30 mm
• Spoke thickness 4 mm
• Material: aluminum
• Spoke width 30 mm
• Spoke thickness 4 mm
Four-spoke ALU 600 rack for the storage of fiber optic cable in telecommunications manholes, on walls and poles.
• Diameter of stock wheel 600 mm
• Material: aluminium
• Arm width: 30 mm
• Arm thickness: 4 mm
• Material: aluminium
• Arm width: 30 mm
• Arm thickness: 4 mm
The pack contains 100 pieces of brackets for fixing cables.
• Mounting method: nail
• Clamp eye size: 5 mm
• Clamp eye size: 5 mm
The pack contains 100 pieces of brackets for fixing cables.
• Mounting method: nail
• Clamp eye size: 6 mm
• Clamp eye size: 6 mm
The pack contains 100 pieces of brackets for fixing cables.
• Mounting method: nail
• Clamp eye size: 7 mm
• Clamp eye size: 7 mm
Cable markers make it easier to identify cables. They are particularly useful in installations centred around large cable bundles - such as multiswitch, LAN or CCTV installations.
• Clear identification of coaxial and twisted pair cables
• Made of plastic
• Set contains 10 sets of numbers with 10 markers each
• Made of plastic
• Set contains 10 sets of numbers with 10 markers each
Cable markers make it easier to identify cables. They are particularly useful in installations centred around large cable bundles - e.g. multiswitch, LAN or CCTV installations.
• Clear identification of coaxial and twisted pair cables
• Made of plastic
• Set contains 3 sets of letters with 30 markers each
• Made of plastic
• Set contains 3 sets of letters with 30 markers each
The cable tie can be used to make cable harnesses or to mark wires for easier identification.
• Color: white
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
• Length: 110 mm
• Width: 2.5 mm
• Plate size 10x20 mm
• Material: polyamide 6.6
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High tenacity strength: 114 kg
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
• Wide temperature range: -40°C to +85°C
• Self-extinguishing material: flame class UL94 V0 or V2
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: yellow
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: red
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
The E951044 cable ties can be used for binding cables into bundles or marking cables for easier identification.
• Colour: green
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability classification to UL 94 V2
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• Colour: black
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
• The band is used to mark the wires
• Self-extinguishing with flammability rating to UL 94 V2
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
Clamping tape can be used to join cable bundles or to mark cables for easier identification.
• High mechanical breaking strength
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
• High thermal resistance
• Self-extinguishing with flammability classification to UL94 V0 or V
Self-vulcanising tape is widely used for sealing cable connections in both indoor and outdoor installations.
• After application, the vulcanisation process occurs automatically
• Large operating temperature range of -40°...90°C
• Can be applied to many types of rubber and cable insulating plastics (e.g. PE, PVC, butyl, neoprene)
• High resistance to prolonged immersion in water and excellent ozone resistance
• Easy removal of insulation without leaving residue on the surface - ideal for temporary applications
• Delivered with a plastic spacer that must be removed before applying the tape
• Large operating temperature range of -40°...90°C
• Can be applied to many types of rubber and cable insulating plastics (e.g. PE, PVC, butyl, neoprene)
• High resistance to prolonged immersion in water and excellent ozone resistance
• Easy removal of insulation without leaving residue on the surface - ideal for temporary applications
• Delivered with a plastic spacer that must be removed before applying the tape
Self-vulcanising tape is widely used for sealing cable connections in both indoor and outdoor installations.
• After application, the vulcanisation process occurs automatically
• Large operating temperature range of -40°...90°C
• Can be applied to many types of rubber and cable insulating plastics (e.g. PE, PVC, butyl, neoprene)
• High resistance to prolonged immersion in water and excellent ozone resistance
• Easy removal of insulation without leaving residue on the surface - ideal for temporary applications
• Delivered with a plastic spacer that must be removed before applying the tape
• Large operating temperature range of -40°...90°C
• Can be applied to many types of rubber and cable insulating plastics (e.g. PE, PVC, butyl, neoprene)
• High resistance to prolonged immersion in water and excellent ozone resistance
• Easy removal of insulation without leaving residue on the surface - ideal for temporary applications
• Delivered with a plastic spacer that must be removed before applying the tape
PVC adhesive tape is a high-quality, lead-free, insulating, self-extinguishing, soft PVC tape with a strong rubber-based adhesive coating.
• The highest quality materials are used to ensure a slow ageing process
• Adhesive based on rubber for high adhesion to the substrate
• High elasticity (180%) with high breaking force (25 N/cm)
• Self-extinguishing material
• Good resistance to abrasion, scuffing, corrosion and moisture.
• Good resistance to punctures
• Approved by IMQ and VDE•
• Adapted to BS3924
• Operating temperature: 0ºC...90ºC
• Adhesive based on rubber for high adhesion to the substrate
• High elasticity (180%) with high breaking force (25 N/cm)
• Self-extinguishing material
• Good resistance to abrasion, scuffing, corrosion and moisture.
• Good resistance to punctures
• Approved by IMQ and VDE•
• Adapted to BS3924
• Operating temperature: 0ºC...90ºC
PVC adhesive tape is a high-quality, lead-free, insulating, self-extinguishing, soft PVC tape with a strong rubber-based adhesive coating.
• The highest quality materials are used to ensure a slow ageing process
• Adhesive based on rubber for high adhesion to the substrate
• High elasticity (180%) with high breaking force (25 N/cm)
• Self-extinguishing material
• Good resistance to abrasion, scuffing, corrosion and moisture
• Good resistance to punctures
• Approved by IMQ and VDE•
• Adapted to BS3924
• Operating temperature: 0°C...90°C
• Adhesive based on rubber for high adhesion to the substrate
• High elasticity (180%) with high breaking force (25 N/cm)
• Self-extinguishing material
• Good resistance to abrasion, scuffing, corrosion and moisture
• Good resistance to punctures
• Approved by IMQ and VDE•
• Adapted to BS3924
• Operating temperature: 0°C...90°C
PVC adhesive tape is a high-quality, lead-free, insulating, self-extinguishing, soft PVC tape with a strong rubber-based adhesive coating.
• The highest quality materials are used to ensure a slow ageing process
• Adhesive based on rubber for high adhesion to the substrate
• High elasticity (180%) with high breaking force (25 N/cm)
• Self-extinguishing material
• Good resistance to abrasion, scuffing, corrosion and moisture
• Good resistance to punctures
• Approved by IMQ and VDE•
• Adapted to BS3924
• Operating temperature: 0°C...90°C
• Adhesive based on rubber for high adhesion to the substrate
• High elasticity (180%) with high breaking force (25 N/cm)
• Self-extinguishing material
• Good resistance to abrasion, scuffing, corrosion and moisture
• Good resistance to punctures
• Approved by IMQ and VDE•
• Adapted to BS3924
• Operating temperature: 0°C...90°C
The Signal LP42-44DT LCD wall-mounted, tiltable TV bracket has been designed to allow a modern LCD (OLED) TV to be hung on a vertical wall.
• Screen size range: 32''... 55''
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance of TV's rear to the wall: 56 mm
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance of TV's rear to the wall: 56 mm
The Signal LP42-46DT LCD wall-mounted, tiltable TV bracket has been designed to allow a modern LCD (OLED) TV to be hung on a vertical wall.
• Screen size range: 37"...70''
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance from wall (to the TV's back): 56 mm
• Mounting interface: max. VESA 600x400
• Tilt adjustment: -10°...+5°
• Load capacity: 50 kg
• Distance from wall (to the TV's back): 56 mm
• Mounting interface: max. VESA 600x400
The Signal PLB-42L wall-mounted, tiltable LCD TV bracket has been designed to allow a modern LCD (OLED) TV to be hung on a vertical wall.
• Screen size range: 32''... 55''
• Tilt adjustment: -10° ... 0°
• Load capacity: 50 kg
• Distance from wall: 46 mm
• Tilt adjustment: -10° ... 0°
• Load capacity: 50 kg
• Distance from wall: 46 mm
The Signal LPA36-443A LCD wall-mounted, tiltable TV bracket has been designed to allow a modern LCD (OLED) TV to be hung on a vertical wall.
• New! Universal LCD/LED/OLED wall mount
• Screen size range (diagonal): 32'' - 55''
• Tilt adjustment: -20°... +10°
• Horizontal rotation range: -90°... +90°
• Leveling: -3°... +3°
• Load capacity: 50 kg
• Distance from wall: 62 - 475 mm
• Mounting interface: VESA (200x200, 400x200, 300x300, 400x400)
• Screen size range (diagonal): 32'' - 55''
• Tilt adjustment: -20°... +10°
• Horizontal rotation range: -90°... +90°
• Leveling: -3°... +3°
• Load capacity: 50 kg
• Distance from wall: 62 - 475 mm
• Mounting interface: VESA (200x200, 400x200, 300x300, 400x400)
The Signal LPA49-466 wall mount has been designed to allow a modern 'thin' LCD (OLED) TV to be hung on a vertical wall.
• TV screen size range: 37"... -90”
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
• Tilt adjustment: -15o ... +5o
• Horizontal rotation range: 120o
• Leveling: -3o ... +3o
• Load capacity: 65 kg
• Distance from wall: 69-635 mm
• Mounting interface: VESA 200x200, 300x300, 400x200, 400x400, 600x400
The Signal LP59-46T wall mount has been designed to allow a modern 'thin' LCD (OLED) TV to be hung on a vertical wall.
• TV screen size range: 37"... 80”
• Tilt adjustment: -10o ... +5o
• Load capacity: 70 kg
• Distance from wall: 49 mm
• Mounting interface VESA: 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400
• Tilt adjustment: -10o ... +5o
• Load capacity: 70 kg
• Distance from wall: 49 mm
• Mounting interface VESA: 200x200, 300x200, 300x300, 400x200, 400x300, 400x400, 600x400
The KMA20-220 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12°... +3°
• Horizontal rotation range: -25°... +25°
• Load capacity: 25 kg
• Distance from wall: 75 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The KMA20-221 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12o ... +3o
• Horizontal rotation range: -90o ... +90o
• Load capacity: 25 kg
• Distance from wall: 65. 200 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The KMA20-223 bracket has been designed to place a modern OLED/LCD monitor on a wall.
• Screen size range: 23"... 42”
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
• Tilt adjustment: -12° ... +3°
• Horizontal rotation range: -90°... +90°
• Load capacity: 25 kg
• Distance from wall: 65 - 408 mm
• Mounting interface: VESA 75x75, 100x100, 200x100, 200x200
The Signal LDA18-112N monitor bracket has been designed to allow a modern LCD (OLED) TV to be hung on a vertical wall.
• Screen size range: 13"... 27"
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
• Tilt adjustment: -12° ... +8°
• Horizontal rotation range: -90° ... +90°
• Leveling: -3° ... +3°
• Load capacity: 15 kg
• Distance from wall: 51 ... 366 mm
• Material: aluminum alloy
The Signal PLB-CE946-02L, 37''-70''' ceiling TV bracket has been designed to allow a modern LCD (OLED) TV to be suspended on a vertical wall.
• Screen size range: 37''...70''
• Tilt adjustment: 0o ... -25o
• Horizontal rotation: 360o
• Distance from ceiling (to the middle of the screen): 1060 mm ... 1560 mm
• Load capacity: 50 kg
• VESA: 200x200, 400x200, 300x300, 400x400, 600x400
• Tilt adjustment: 0o ... -25o
• Horizontal rotation: 360o
• Distance from ceiling (to the middle of the screen): 1060 mm ... 1560 mm
• Load capacity: 50 kg
• VESA: 200x200, 400x200, 300x300, 400x400, 600x400



