The I-T1500.ES-AL pole bracket is made of aluminum alloys and can be fastened with two 20 mm steel straps or one screw.
• Made of aluminum alloys
• Durable and corrosion resistant
• Can be fastened with 20mm steel strips or screws
• Durable and corrosion resistant
• Can be fastened with 20mm steel strips or screws
The I-T1500.PS-AL pole bracket is made of aluminum alloy. It can be mounted to a pole with two steel 20-millimeter wide tape or with one screw.
The Telcom SS BELG suspension clamp (loop holder) is used in the construction of fiber-optic overhead networks. It is mounted on hooks and brackets, using a practical clip hook (carabiner).
• Universal clamp for overhead lines
• Carabiner clip hook
• Carabiner clip hook
• Dedicated for flat cables
• Maximum cable width: 10 mm
• Made of stainless steel
• Easy to mount
• Maximum cable width: 10 mm
• Made of stainless steel
• Easy to mount
DROP clamp allows the suspension of a cable including a short reserve of it. The entire clamp is coated with a UV protective layer. The clamp is designed for cables with a diameter between 3 and 6 mm.
• For suspending cables with diameter 3-6 mm
• UV-protected plastic
• Place for a short cable reserve
• UV-protected plastic
• Place for a short cable reserve
LINEO pul bracket is designed for the implementation of overhead lines based on cables with a diameter of up to 3.5 mm.
• Range of external cable diameters: 2.5 mm-3.5 mm
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design.
• Cable inserted into self-clamping mechanism
• Compact innovative design guarantees correct cable routing
• Mounting to any type of bracket, thanks to the opening catch
• High strength and resistance to weather conditions (temperature, UV radiation)
• Equipped with cable vibration damper
• Patented design.
The anchoring clamp allows the suspension of a cable The body is made of UV-protected plastic. The clamp is designed for round cables with a diameter between 3 and 7 mm.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 7 mm
• Minimum breaking force of 3.6 kN
• Body made of UV-protected plastic
• For cables with a diameter between 3 and 7 mm
• Minimum breaking force of 3.6 kN
The I-69.PAT anchoring clamp allows the suspension of a cable. The body is made of UV-protected plastic. The clamp is designed for cables with a diameter between 6 and 9 mm. The minimum breaking force is 3.6 kN.
• For suspension of a cable
• Body made of UV-protected plastic
• For cables with a diameter between 6 and 9 mm
• Minimum breaking force of 3.6 kN
• Body made of UV-protected plastic
• For cables with a diameter between 6 and 9 mm
• Minimum breaking force of 3.6 kN
The I-T1000.PA anchoring clamp allows the suspension of a cable. The body is made of aluminum alloy. The clamp is designed for round cables with a diameter between 8 and 12 mm. The minimum breaking force is 10 kN.
• Anchoring clamp dedicated for cables with 8-12 mm diameter,
• Solid construction - aluminum body, wedges made of UV-resistant plastic,
• Minimum breaking force: 10 kN.
• Solid construction - aluminum body, wedges made of UV-resistant plastic,
• Minimum breaking force: 10 kN.
The I-FISH11 anchoring clamp allows the suspension of a cable including a short reserve of it. The clamp is designed for cables with a diameter up to 4 mm. The item is made of UV-resistant plastics.
• Anchoring clamp for suspending cables
• Body made of UV-resistant plastic
• Designed for cables with a diameter up to 4 mm
• Can be used for suspending flat cables
• Body made of UV-resistant plastic
• Designed for cables with a diameter up to 4 mm
• Can be used for suspending flat cables