English
Polski
Česky
Deutsch
Irish
Magyar
Português
Română
Slovenský
The M5734 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Designed for protection of electronic devices and cable connectors
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
The M5736 installation box (240x190x90 mm) is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x90 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x90 mm
• Optional accessories: chassis, cable fittings/glands
The M5738 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
The M5742 installation box is made of aluminum and has very high IP66 rating. It is possible due to the seal made of EPDM rubber and placed in the cover.
• Weatherproof installation box made of aluminum
• Dimensions: 140x115x60 mm
• IP66 rating
• Seal made of EPDM rubber
• Dedicated accessories available
• Dimensions: 140x115x60 mm
• IP66 rating
• Seal made of EPDM rubber
• Dedicated accessories available
The mount has been designed for placing Signal waterproof installation boxes on poles with diameters from 40 to 60 mm.
• For placing waterproof installation boxes on poles with diameters from 40 to 60 mm
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
The mount has been designed for placing waterproof installation boxes on poles with diameters from 40 to 60 mm. The rear wall of R90602 210/230/145 box is screwed down with M5 screws to the aluminum bars that are attached to a pole with U-bolts. The set consists of two brackets, the M5 screws go wit...
The mount is designed for placing installation boxes on poles with diameters from 40 to 60 mm. The rear wall of a box is screwed down with M5 screws to the aluminum bars that are attached to a pole with U-bolts. The set consists of two brackets, 2 U-bolts, and M5 screws with seals and washers. The f...
Pole mount for waterproof boxes.
• Pole mounting of waterproof boxes
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
Pole mount for waterproof boxes SH-750 for pole mounting.
• Pole mounting of waterproof boxes
• Fixing a box with M5 bolts
• 3 brackets included
• Made of aluminum – resistant to corrosion.
• Fixing a box with M5 bolts
• 3 brackets included
• Made of aluminum – resistant to corrosion.
Mast mount for sealed boxes 210/230/145 for pole mounting.
• Mounting of sealed boxes to a pole
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
