EN
PL
CZ
DE
IE
HU
PT
RO
SK
Metal housing for surface mounting for telecom systems to protect various devices installed in such systems.
• Dimensions: 500x700x200 mm
• Material: 0.8 - 1.2 mm galvanized steel sheet
• Front: door locked with a cylinder lock with 2 keys included
• Back: 6 mm thick plywood wall
• 35 mm diameter holes for cable glands in the top and bottom panels
• Weight 7.7 kg
• Material: 0.8 - 1.2 mm galvanized steel sheet
• Front: door locked with a cylinder lock with 2 keys included
• Back: 6 mm thick plywood wall
• 35 mm diameter holes for cable glands in the top and bottom panels
• Weight 7.7 kg
Metal housing, used as connection/distribution box, 2 keys included. Size: 400x400x140 mm.
• Dimensions: 400x400x140 mm
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 3.40 kg
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 3.40 kg
The casing is used in surface-mounted installations in telecommunications installations to protect various devices installed in this type of installations.
• Dimensions: 520x400x140 mm
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 4.20 kg
• Material: galvanized steel sheet, 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with 2 keys included
• Back: wall made of 6 mm thick plywood
• 35 mm diameter punches in the upper and lower walls for cable entry
• Weight 4.20 kg
Metal housing, used as connection/distribution box, 2 keys included. Size: 300x300x100 mm.
• Width x height x depth: 300x300x100 mm,
• Weight: 1.75 kg,
• Material: galvanized steel sheets (0.8-1.2 mm),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm.
• Weight: 1.75 kg,
• Material: galvanized steel sheets (0.8-1.2 mm),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm.
The housing is used for surface mounting for telecommunication systems in order to protect various devices installed.
• Dimensions: 240x150x100 mm
• Material: 0.8-1.2 mm thick galvanized steel sheet
• Front: door closed with a cylinder lock with 2 keys in set
• Back: 6-mm thick wall made of plywood
• Weight 0.90 kg
• Material: 0.8-1.2 mm thick galvanized steel sheet
• Front: door closed with a cylinder lock with 2 keys in set
• Back: 6-mm thick wall made of plywood
• Weight 0.90 kg
Installation box for housing splitters and taps on building floors.
• Box for housing splitters, taps etc. in buildings
• Width x height x depth: 240x150x50 mm
• Weight: 0.70 kg,
• Material: galvanized steel sheets (0.8-1.2 mm),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm.
• Width x height x depth: 240x150x50 mm
• Weight: 0.70 kg,
• Material: galvanized steel sheets (0.8-1.2 mm),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm.
Metal housing, used as connection/distribution box, 2 keys included. Size: 200x300x120 mm.
• Dimensions: 200x300x120 mm
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.6 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 1.6 kg
Metal housing, used as connection / distribution box, 2 keys included. Size: 540x420x180 mm.
• Dimensions: 540x400x180 mm
• Material: galvanized steel sheet 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 5.60 kg
• Material: galvanized steel sheet 0.8 - 1.2 mm thick
• Front: door closed with a cylinder lock with two keys included
• Back: wall made of 6 mm thick plywood
• Weight: 5.60 kg
Metal housing, used as connection / distribution box, 2 keys included. Size: 500x500x200 mm.
• Dimensions: 500x500x200 mm
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 6.10 kg
• Material: galvanized steel sheets (0.8-1.2 mm)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
• Weight: 6.10 kg
Metal housing, used as connection/distribution box, 2 keys included. Size: 450x350x120 mm.
Surface-mounted metal housing suitable for installing antenna system components inside buildings. The housing is suitable for placing and protecting components of small and medium systems, such as amplifiers, multiswitches, power supplies, splitters, taps.
• width x height x depth: 600x400x200 mm
• weight: 6,5 kg
• material: galvanized steel sheets, powder coated with polyester paint for outdoor use
• front: door closed with a lock (two keys incl.)
• rear: 6 mm plywood
• perforated openings for cables in the bottom and top sheets
• ventilation holes in the top and bottom sheets
• color: white (RAL9003)
• weight: 6,5 kg
• material: galvanized steel sheets, powder coated with polyester paint for outdoor use
• front: door closed with a lock (two keys incl.)
• rear: 6 mm plywood
• perforated openings for cables in the bottom and top sheets
• ventilation holes in the top and bottom sheets
• color: white (RAL9003)
Surface-mounted metal housing to protect devices used in telecommunications systems.
• Dimensions: 1000x550x150 mm
• Front: double door, one leaf secured with two bolts, and the other lockable with a cylinder lock with 2 keys included
• Back: wall made of plywood with a thickness of 6 mm
• Weight 14 kg
• Front: double door, one leaf secured with two bolts, and the other lockable with a cylinder lock with 2 keys included
• Back: wall made of plywood with a thickness of 6 mm
• Weight 14 kg
Metal housing designed for flush mounting, for small and medium-sized antenna systems, in order to protect splitters, taps, amplifiers, power supplies, multiswitches, etc.
• Width x height x depth: 400x400x120 mm
• Weight: 3.7 kg
• Material: galvanized steel sheets, powder-coated (outdoor finish)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
}}
• Weight: 3.7 kg
• Material: galvanized steel sheets, powder-coated (outdoor finish)
• Front: door with cylinder lock (2 keys included)
• Rear: plywood with a thickness of 6 mm
}}
• For small and medium-sized antenna and CCTV systems
• Can house e.g. a multiswitch and TV amplifier
• Width x height x depth: 400x500x120 mm
• Designed for flush mounting
• Material: galvanized steel sheets, powder-coated (outdoor finish),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm
• Can house e.g. a multiswitch and TV amplifier
• Width x height x depth: 400x500x120 mm
• Designed for flush mounting
• Material: galvanized steel sheets, powder-coated (outdoor finish),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm
Metal enclosure designed for flush-mounted installation to protect telecommunications equipment.
• Dimensions: 500x500x200 mm
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• Mass: 5.8 kg
• Material: galvanised steel sheet, powder-coated with external facade paint
• Fastening: single point locking with key (two keys included)
• Back: wall made of 6 mm thick plywood
• For small and medium-sized antenna and CCTV systems
• Can house e.g. a multiswitch and TV amplifier
• Width x height x depth: 500x400x140 mm
• Designed for flush mounting
• Material: galvanized steel sheets, powder-coated (outdoor finish),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm
• Can house e.g. a multiswitch and TV amplifier
• Width x height x depth: 500x400x140 mm
• Designed for flush mounting
• Material: galvanized steel sheets, powder-coated (outdoor finish),
• Front: door with cylinder lock (2 keys included),
• Rear: plywood with a thickness of 6 mm
Sealed box designed for mounting to the pole or wall. Designed for CCTV systems. A mounting plate and two DIN rails are provided inside the box.
• Designed for CCTV systems
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
• Mounting to a pole or wall
• Dimensions 210/230/145 mm
• Door protected by gasket, lockable by key
• 6 cable glands (to be punched)
• Incl. 6 cable glands (2x PG13.5, 4x PG9)
• Metal mounting plate (removable)
• Two DIN rails
• Protective wires
• Tightness class IP66
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• The box can be mounted on a pole or wall
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
• Dimensions 210/230/145 mm
• Door protected with a rubber seal
• Door locked with cylinder lock
• 4 mounting holes
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
• Dimensions 250/310/145 mm
• Mounting plate 210x260 mm
• Door protected with a gasket
• Doors locked with a key
• 5 cable holes with gaskets
• Protection class IP55
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mountable on a wall or pole
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
• External dimensions: 410/310/145 mm
• Internal mounting plate with size of 360x240 mm
• Door protected with rubber seal
• Door locked with cylinder lock
• 6 cable openings with seals
• IP55 rating
The waterproof installation box for wall or pole mounting. A mounting plate inside the box.
• Mounting on pole or wall
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
• Dimensions 540/310/145 mm
• Mounting plate 510x260 mm
• Door protected with a gasket
• Doors locked with a key
• 7 cable holes with gaskets
• Protection class IP55
The cabinet is made of corrosion-resistant aluminum and designed both for indoor and outdoor use.
Waterproof cabinet designed for a mast or wall mounting, with a mounting plate inside.
• Made of aluminum, corrosion resistant
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
• Dimensions: 750x595x322 mm
• 5U RACK rails
• Weight 10 kg
• Suitable for mast mounting
• 6 23 mm diameter holes for cable glands
• Glands and rubber gaskets included
Sealed cabinet designed for mounting to the ground. Ideal as a housing for telecommunications connections.
• Made of aluminum, corrosion resistant
• Dimensions: 1355x295x208 mm
• Weight 5.3 kg
• Dimensions: 1355x295x208 mm
• Weight 5.3 kg
Surface mounted junction box, for installation in any apartment in a multi-family building, compliant with applicable regulations.
• Dimensions: 300x350x100 mm
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 3.5 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 3.5 kg
Flush-mounted cable connection box intended for apartments in multifamily buildings, used in each apartment to connect telecommunication cables running from the technical room with those connected to the outlets deployed in the apartment.
• External dimensions (W x H x D): 300 x 350 x 90 mm
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 2.9 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 2.9 kg
Flush-mounted cable connection box intended for apartments in multifamily buildings, used in each apartment to connect telecommunication cables running from the technical room with those connected to the outlets deployed in the apartment.
• External dimensions: 355 x 405 x 90 mm
• Weight: 4.9 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 4.9 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
Surface mounted junction box, for installation in any apartment in a multi-family building, compliant with applicable regulations.
• Dimensions: 350x400x90 mm
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 4 kg
• Material: galvanized steel sheet, powder coated - outdoor finishing
• Locking: single-point lock (two keys included)
• Mounting panel
• Cable openings
• Weight: 4 kg
The installation box 150x110x700 mm is made of plastic. It is used to protect electronic devices.
• The box is designed for protecting electronic devices and cable connections in installations
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
• IP56 protection class
• Mounting the cover on steel screws
• Can be purchased with a dedicated mounting plate
The M5734 installation box is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Designed for protection of electronic devices and cable connectors
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
• Dimensions: 190x140x70 mm
• IP rating: IP56
• Cover fixing with steel screws
• Dedicated chassis available
The M5736 installation box (240x190x90 mm) is made of plastics and has IP56 rating. It secures electronics equipment, cable connections etc.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x90 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x90 mm
• Optional accessories: chassis, cable fittings/glands
The installation box 240x190x125 mm is made of plastic.
• Dedicated for low-voltage installations
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
• IP56 ingress protection glass
• Made of durable plastic
• Dimensions: 240x190x125 mm
• Optional accessories: chassis, cable fittings/glands
The Alubox 140x115x60 mm M5742 box is an electrical installation box made of aluminium. It owes its high IP66 protection class to the gasket.
• Weatherproof installation box made of aluminum
• Dimensions: 140x115x60 mm
• IP66 rating
• Seal made of EPDM rubber
• Dedicated accessories available
• Dimensions: 140x115x60 mm
• IP66 rating
• Seal made of EPDM rubber
• Dedicated accessories available
The mount has been designed for placing Signal waterproof installation boxes on poles with diameters from 40 to 60 mm.
• For placing waterproof installation boxes on poles with diameters from 40 to 60 mm
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
• The box is screwed down with M5 screws to the aluminum bars
• The set consists of two brackets
• Resistant to corrosion, the flat bars are made of aluminum
The mount has been designed for placing waterproof installation boxes on poles with diameters from 40 to 60 mm. The rear wall of R90602 210/230/145 box is screwed down with M5 screws to the aluminum bars that are attached to a pole with U-bolts. The set consists of two brackets, the M5 screws go wit...
The mount is designed for placing installation boxes on poles with diameters from 40 to 60 mm. The rear wall of a box is screwed down with M5 screws to the aluminum bars that are attached to a pole with U-bolts. The set consists of two brackets, 2 U-bolts, and M5 screws with seals and washers. The f...
Pole mount for waterproof boxes.
• Pole mounting of waterproof boxes
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
• Fixing a box with M5 bolts
• 2 brackets included
• Made of aluminum – resistant to corrosion
Pole mount for waterproof boxes SH-750 for pole mounting.
• Pole mounting of waterproof boxes
• Fixing a box with M5 bolts
• 3 brackets included
• Made of aluminum – resistant to corrosion.
• Fixing a box with M5 bolts
• 3 brackets included
• Made of aluminum – resistant to corrosion.
Mast mount for sealed boxes 210/230/145 for pole mounting.
• Mounting of sealed boxes to a pole
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
• Mounting to the box with M5 bolts
• Included 2 fixing elements
• Made of aluminum, corrosion resistant.
The 240x190 mm chassis has been made of galvanized steel. It is used for placing various devices in installation boxes. The kit includes 4 crews for mounting the plate to the box.
The chassis has been made of galvanized steel. It is used for placing various devices in Alubox 140x115x60 installation box. The kit includes 4 screws for mounting the plate to the box.
The DIN rail is used for mounting devices in Alubox 140x115x60mm installation box.
Cable fittings/glands are intended for inserting cables into installation boxes. They protect the cables from mechanical stresses (that would be caused by sharp edges of the holes in the boxes) as well as ensure proper ingress protection level of the boxes (against moisture, drops and even streams o...
Cable fittings/glands are intended for inserting cables into installation boxes. They protect the cables from mechanical stresses (that would be caused by sharp edges of the holes in the boxes) as well as ensure proper ingress protection levels of the boxes (against moisture, drops and even streams ...
Cable fittings/glands are intended for inserting cables into installation boxes. They protect the cables from mechanical stresses (that would be caused by sharp edges of the holes in the boxes) as well as ensure proper ingress protection levels of the boxes (against moisture, drops and even streams ...
Cable gland with 3/4" thread in gray color. The gland protects both the cable from the sharp edges of the device housing and the device from unwanted external influences.
• Material: ABS
• 3/4" thread
• Gray color
• Tightness class: IP68
• 3/4" thread
• Gray color
• Tightness class: IP68
